|
Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 8.55 lb.
|
148.07 |
|
|
IDMK-H89R Reinforced In-Dash Mounting Kit for HELIX® 8/9 G3N/G4N
In-Dash Mounting Kit allows quick and easy, in-dash installation, with all necessary mounting hardware.
Features:
Compatible with: HELIX 9 MSI GPS G4N, HELIX 9 MSI GPS G3N, HELIX 9 MDI GPS G4N, HELIX 9 MDI GPS G3N, HELIX 9 CHIRP GPS G4N, HELIX 9 CHIRP GPS G3N, HELIX 8 MSI GPS G4N, HELIX 8 MSI GPS G3N, HELIX 8 MDI GPS G4N, HELIX 8 MDI GPS G3N, HELIX 8 CHIRP GPS G4N, HELIX 8 CHIRP GPS G3N
|
63.62 |
|
|
Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 9.73 lb.
|
164.96 |
|
|
8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate
The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: Part number reflects product packaged in clear clam shell for store shelf display
|
100.09 |
|
|
RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole™ will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole™. The height of the Tele-Poles™, combinded, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Dual articulating swing arms allows for ideal device placement
Compatible with a variety of RAM® laptop, tablet, and other device holders
Made of powder-coated steel and marine-grade aluminum
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(4) 5/16"-18 x 1" Carriage Bolts
(4) 5/16"-18 Hex Nuts
(4) 5/16" Flat Washers
(4) 5/16" Split Lock Washers
(4) Rubber Caps
|
126.49 |
|
|
RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)
Description
The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.
The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
109.96 |
|
|
Tele-Mount™ Telescoping Camera Pole Kit - 1/4-20 Camera Threaded Adapter
Consists of a female hole base with 1" ball, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The female hole base will fit most common telescoping and extension poles. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
1/4"-20 male threaded stud will connect to most female threads found on POV cameras
High strength materials ensure product longevity
Fits most common telescoping and extension poles
Great for achieving that perfect underwater fish shot
Double ball and socket mount offers infinite adjustment angles
Place pole in a kayak milk crate, rod holder or the RAP-119U
Lifetime warranty
Compatible Poles:</>B
Most generic telescoping poles with 0.715" OD Threads
Ettore 42004 4-Feet Reach Extension Pole
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
30.18 |
|
|
Tele-Sun Carbon Fiber Shade Poles with Carry Bag
Extend your time on the water and at the sandbar with the new Tele-Sun Shade Poles! Made from strong, lightweight and flexible Carbon Fiber, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 52.89" to 80.4" tall.
Features:
Lightweight Carbon Fiber material with clear, Awl Grip UV-protection
Built to withstand the harsh marine environments
Easy installation to deck-mounted rod holders with 1/4” pin
Cam cleat allows for easy adjustment of line tension
Open hood feature allows for alternative fabric clamping bungee cord system
Extends from 52.89" to 80.4"
Sold as a pair
Includes a mesh carrying bag for storage
Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material
1-year limited warranty
|
1224.50 |
|
|
RAM Double Swing Arm w/8" Male & No Female Tele-Pole
Swing Arm connects to No Ball Base.
Material: Powder Coated Steel
Color: Black Powder Coat
|
79.80 |
|
|
RAM Double Swing Arm w/8" Male and No Female Tele-Pole
Swing Arm connects to 3.68" Diameter ball base.
|
101.44 |
|
|
Tough-Charge™ with X-Grip® Tech Waterproof Wireless Charging Holder
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for vehicles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable.
Features:
Waterproof Qi wireless phone charging cradle features spring-loaded RAM X-Grip technology
Kit for vehicles includes wireless cradle, B size diamond ball base, and extension cable; attaches to B size double socket arms
Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
RAM Mounts backed by lifetime warranty, RAM electronics backed by 1-year warranty
Specifications:
Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) 1.2 Meter USB Extension Cable
Holder Dimensions: Width Range: 2.375" - 3.25", Depth Range: .875" max
Ball/Socket Size: B Size (1")
|
67.49 |
|
|
RAM 1" Diameter Ball with Custom GoPro Hero Adapter
GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO".
The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Compatible GoPro Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
Mount to many RAM double socket arms and mounts
Multiple articulation and adjustment points for perfect viewing angles
Lifetime warranty
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
10.56 |
|
|
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate
Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.64 lbs
|
38.71 |
|
|
Marine Kettle® Pow'r GripFish Rod Holder Mount
Made of 18-8 stainless steel and cast 356 hard anodized aluminum to endure the most severe marine environment.
This versatile mount fits most cylindrical type rod holders and allows grills to mount in any direction from the rod holder. Its unique quick disconnect system allows instant installation or storage after use without tools.
Compatible With:
Marine Kettle® Grills
*Sold as an Individual
|
113.99 |
|
|
Strap Base w/GoPro Camera Mount
Strap Base w/GoPro Camera Mount
|
39.17 |
|