Fairlead Black Plastic with Stainless Steel Liner - 8.5mm(5/16") ID Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance. Materials: Impact resistant, U.V. stablized Nylon Stainless steel liner

Morosini 13.8" Steering Wheel - Black Polyurethane with Stainless Steel Spokes & Chrome Hub Features: Standard 3/4″ Taper Hub Included Meet with the EN 28848 and ABYC P22 Standards Ø 13.8” (350 mm) Grip: Polyurethane Spokes: 304 Stainless Steel Hub: Chrome Colors: Black Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.66"

Wire Rope Grip - Size 8 - 8mm(5/16") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused

Chesapeake Black w/Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Voltmeter, Water Temperature & Oil PSI - Inboard Motors Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.   Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install. Boxed Set Includes: Speedometer (0 to 60 MPH) (GPS) Tachometer (0 to 6000 RPM) Fuel Level (E to F) Voltmeter 10 to 16 AMPS) Water Temperature (100 to 250° F) Oil Pressure (0 to 80 PSI) Specifications: Anti-scratch glass lens 12 VDC negative ground Dual Scale - Imperial and Metric Factory P/N KTF064 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-10mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-15mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Multi Cable Seal with Black Coated Cover - Stainless Steel Wire - 2-17mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44 lb. Anchors Stainless Steel Jaw Jaw Swivel

1600 Lumen Interior/Exterior Adjustable Area Light w/Stainless Steel Swivel Mounting Bracket - White The compact indoor/outdoor light utilizing the newest high performance LED technology. Excellent for lighting up small to medium size areas. Compact design has an IP65 Rating and can be surface mounted or tilted on its Stainless Steel bracket mount. When surface mounted the bracket seems to disappear for an attractive look. Hard Anodized aluminum housing with Baked Urethane finish for extreme durability. Glass lens will not become brittle or turn yellow like plastic lenses. Features: Baked Urethane Corrosion Resistant Finish IP65 Waterproof Design with Stainless Bracket 1600 Lumens uses only 8 Watts of Power 10-40VDC 8 Watts Beam Angle: 120° Stainless Steel Swivel Mounting Bracket Color: White 2-Year Warranty

BS-14 Stainless Steel Basket - 3.1" x 16.0" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-3025

CableClam w/Stainless Steel Dress Cap - 0.68" Features: Pre-drilled and slit rubber seals for easier installation. A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV Stainless steel fasteners included For use above the waterline only Specifications: Max Cable Diameter: 0.31in (7.87 mm) Max Connector Diameter: 0.68in (17.27 mm) Dress Cap Material: 316 Stainless Steel Mounting Hole: Accept #6 x 7/8" Screws Ring Material: UV-Stabilized Thermoplastic Seal Material: UV-Stabilized Buna-N Rubber WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

CableClam w/Stainless Steel Dress Cap - 0.83" Features: Pre-drilled and slit rubber seals for easier installation. A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV Stainless steel fasteners included For use above the waterline only Specifications: Max Cable Diameter: 0.44in (11.18 mm) Max Connector Diameter: 0.83in (21.08 mm) Dress Cap Material: 316 Stainless Steel Mounting Hole: Accept #6 x 7/8" Screws Ring Material: UV-Stabilized Thermoplastic Seal Material: UV-Stabilized Buna-N Rubber WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

CableClam w/Stainless Steel Dress Cap - 1.40" Features: Pre-drilled and slit rubber seals for easier installation. A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV Stainless steel fasteners included For use above the waterline only Specifications: Max Cable Diameter: 0.56in (14.22 mm) Max Connector Diameter: 1.40in (35.56 mm) Dress Cap Material: 316 Stainless Steel Mounting Hole: Accept #6 x 7/8" Screws Ring Material: UV-Stabilized Thermoplastic Seal Material: UV-Stabilized Buna-N Rubber WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Entry CableClam w/Stainless Steel Dress Cap Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. Stainless steel dress cap conceals mounting hardware and matches stainless steel deck fittings. Features: Simple one-piece design for easy side mount installations Low profile, contoured edge reduces the risk of tangling lines A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV Includes all fasteners For use above the waterline only Specifications: Max Cable Diameter: 0.28in (7.11 mm) Max Connector Diameter: 1in (25.4 mm) Dress Cap Material: 316 Stainless Steel Ring Material: UV-Stabilized Thermoplastic Seal Material: UV-Stabilized Buna-N Rubber Weight: 0.50lb (0.23 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

304 Stainless Standoff 1.25" Base 5/16 x 18 Thread .75" Tall - 6-Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.