Pro Model Stretch 14" & 8" Set The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach.  The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Includes a set of stainless steel mounting screws. 

Pro Model Stretch 12 Inch Single Strap The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Holds up to 7 rods. Includes a set of stainless steel mounting screws.

Pro Model Stretch 14" Single Strap The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach.   The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods.  Holds up to 8 rods.  Includes a set of stainless steel mounting screws.

Original Rod Holder 8" & 6" Set - Double Strap The Original 8 Inch and 6 Inch strap is our smallest set of 2 straps.  8 Inch strap for the handle end of the rod and the 6 inch strap for the tips.  Holds up to 4 Rods.  includes stainless steel mounting hardware.

Pro Model Stretch 12" & 6" Set The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Includes a set of stainless steel mounting screws.

Economy Boat Cover Tie-Down Set - 8' - 12-Pack This boat cover tie-down set features quick release buckles for easy attachment to your trailer. Our economy boat cover tie-downs include twelve 8' straps made with polypropylene webbing and easy-to-fasten side release buckles. 

Vinyl Model 12" Strap Vinyl Rod Savers are more durable and weather-resistant. They prevent hooks from embedding and damaging rods. Sleek black vinyl adds durability with a bit of style for a more professional rod display. Holds up to 7 rods.

Vinyl Model 10" Strap Vinyl Rod Savers are more durable and weather-resistant.  They prevent hooks from embedding and damaging rods.  Sleek black vinyl adds durability with a bit of style for a more professional rod display.  Holds up to 6 rods. 

Mate USA M164-007-12 12V GEAR PUMP 4GPM UP3-S Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.   Part n.16400712 Product NameUP3-S Voltage (V)12 Consumption (A)6 Fuse (A)10 Self-priming (m)  1.5 Flow rate (l/min)  15 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)120

Mate USA M164-020-12 12V GEAR PMP FOR LUBR OIL Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.   Part n.16402012 Product NameUP3/OIL Voltage (V)12 Consumption (A)5 Fuse (A)7.5 Self-priming (m)1 Flow rate ⌀ 6 (l/h)20 Flow rate ⌀ 8 (l/h)60 Flow rate ⌀ 13 (l/h)330 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)90

        Wave WiFi products have been providing long-range Internet connectivity to fisherman, cruisers and sailors worldwide.  Select Wave WiFi products are currently on sale at CLR Marine while supplies last.  Don't miss out on these super savings!       NEW PRODUCT - EC-HP & EC-ER Dual Band Models   Wave WiFi's EC-ER and EC-AP-ER Dual Band Models produce a whopping 800mW of output power providing extended range connections to good quality HotSpots. The ER Dual Band models have all of the features and elements of the EC-Series that have made Wave WiFi so popular for convenience and dependability. All ER Dual Band Models ship with the latest firmware version of Wave WiFi's proprietary web-based interface.  Wave WiFi's EC-HP and EC-AP-HP Dual Band Models produce the highest allowable output power of 1 Watt providing long-range connections to good quality HotSpots. The EC-HP Dual Band Model supplies maximum receive sensitivity (-97dBm @ 1-11mbs G). Both HP Dual Band Models support MIMO technology with the optional second external antenna package and factory MIMO activation.       NEW PRODUCT - Rogue Pro Dual Band The Rogue Pro Dual Band features the same trouble free, high powered performance of the Rogue Wave in a sealed, polished stainless steel case. The Rogue Pro Dual Band has an integral 1″-14 ready base for numerous standard marine antenna mounts.     Specials   Closeouts    Remanufactured    Rebates    

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

PP5058 PowerPod Pre-Cut for Lowrance HDS-12 Gen2/HDS-12 Gen3 The PP5050 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.

Poly Rod Strap The Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most chemicals.

PP4800-12 PowerPod Pre-Cut for Garmin GPSMAP® 820 / 820XS / 840 / 840XS / 6008 / 6208 PP4800 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. GEN3 Features: Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. Nickel Chrome Plated Screws NavPod uses all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. NavPod is fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. NavPod has re-designed and re-tooled all of the popular NavPods. NavPod has reviewed all of the former products and selected the best design elements of each and incorporated them in every Gen3 product. Commitment to Quality NavPod is committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, NavPod is confident you will have years of trouble free service and a long lasting high gloss finish. Compatible Devices: Garmin GPSMAP® 820, 820XS, 840, 840XS, 6008 and 6208