Replacement Cable for Trolling Motor Pull Rope Never worry about that trolling motor pull rope breaking again. This stainless steel vinyl coated braided cable is used to replace the manufacturer's pull rope on your trolling motor. This replacement cable will not rust, break or rot. It comes with complete, easy to follow installation instructions. Don't wait for your rope to break, replace it with this durable steel cable now. 

G-Force Trolling Motor Handle & Cable w/Trolling Motor Clamp - Red Endorsed and proven by Gerald "G-Man" Swindle. The patented G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Force™ Trolling Motor Pull Handle & Cable Replace the pull handle and cable on your compatible Force™ trolling motor with these standard pieces. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Outboard Tilt Trim Motor - Yamaha-4 Bolt Replacement outboard tilt trim motor that will fit Yamaha 1997-UP 115 HP. 2000-UP 115 HP 4-Stroke. 1997-2000 130 HP, 1997-UP 150-200 HP, 1998-UP 225 HP. 2-wire connection, bolt mount, ring Terminal Ends, includes O-ring. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 64E-43880-00 YAMAHA Tilt Trim Motor 64E-43880-01 YAMAHA Tilt Trim Motor 64E-43880-03 YAMAHA Tilt Trim Motor 64E-43880-04 YAMAHA Tilt Trim Motor 67H-43880-00 YAMAHA Tilt Trim Motor 67H-43880-01 YAMAHA Tilt Trim Motor 67H-43880-02 YAMAHA Tilt Trim Motor 67H-43880-03 YAMAHA Tilt Trim Motor 67H-43880-04 YAMAHA Tilt Trim Motor 67H-43880-10 YAMAHA Tilt Trim Motor 68V-43880-00 YAMAHA Tilt Trim Motor 68V-43880-01 YAMAHA Tilt Trim Motor 68V-43880-02 YAMAHA Tilt Trim Motor 68V-43880-03 YAMAHA Tilt Trim Motor 68V-43880-04 BRP - OMC Tilt Trim Motor 5036732 SIERRA Tilt Trim Motor 18-6783 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Outboard Tilt Trim Motor - Yamaha, 2-Wire, 3 Bolt, Flat Blade Shaft Replacement outboard tilt trim motor that will fit Yamaha 2002-2009 200, 225, 250 HP 4 Stroke, 2002-2009 200-300 HP 2 Stroke, 2-wire connection, 3-bolt mount, Includes O-ring, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 888645T1 YAMAHA Tilt Trim Motor 60V-43880-00 YAMAHA Tilt Trim Motor 69J-43880-00 YAMAHA Tilt Trim Motor 69J-43880-01 SIERRA Tilt Trim Motor 18-6798 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Outboard Tilt Trim Motor & Reservoir Only - Mercury/Mariner & Force Motor Replacement outboard tilt trim motor and reservoir that will fit late model Mercury /Mariner, Force 40-125 HP outboards w/single ram, 2-wire connection, 4-bolt mount, Hollow-hex shaft, (Motor/Reservoir Only) Includes stainless steel mounting screws, shaft adaptor, O-ring and fill plug. Bullet Connector Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 19217A1 MERCURY Tilt Trim Motor 19217A5 MERCURY Tilt Trim Motor 809885A1 MERCURY Tilt Trim Motor 809885A2 MERCURY Tilt Trim Motor 809885T2 MERCURY Tilt Trim Motor 811674 MERCURY Tilt Trim Motor 813447 MERCURY Tilt Trim Motor 818903A1 MERCURY Tilt Trim Motor 819479A1 MERCURY Tilt Trim Motor 8197480A1 MERCURY Tilt Trim Motor 819762A4 MERCURY Tilt Trim Motor 19762A5 MERCURY Tilt Trim Motor 19762A6 MERCURY Tilt Trim Motor 19762A7 MERCURY Tilt Trim Motor 1977A8 MERCURY Tilt Trim Motor 1977A9 MERCURY Tilt Trim Motor 22870A1 MERCURY Tilt Trim Motor 30250A3 MERCURY Tilt Trim Motor 30250T3 MERCURY Tilt Trim Motor 2021A1 MERCURY Tilt Trim Motor 32021T1 MERCURY Tilt Trim Motor 32021A2 MERCURY Tilt Trim Motor 32021T2 MERCURY Tilt Trim Motor 55654A1 MERCURY Tilt Trim Motor 55654T2 MERCURY Tilt Trim Motor 893907A02 SIERRA Tilt Trim Motor 18-6777 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Yamaha Tilt Trim Motor - 2000-2019 T25 Series Engines Replacement outboard tilt trim motor that will fit Yamaha 25HP-40HP, 2000-2022. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 67C-43880-10-00 YAMAHA Tilt Trim Motor 67C-43880-01-00 YAMAHA Tilt Trim Motor 67C-43880-00-00 YAMAHA Tilt Trim Motor 65W-43880-10-00  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Yamaha Tilt Trim Motor - 1990-2003 250HP/1994-2003 225HP Units Replacement outboard tilt trim motor that will fit Yamaha 225HP-250HP 1993-2003. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 61A-43880-02-00 YAMAHA Tilt Trim Motor 61A-43880-01-00 YAMAHA Tilt Trim Motor 61A-43880-00-00 SIERRA Tilt Trim Motor 18-6782  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Outboard Tilt Trim Motor - Yamaha-4 Bolt, 5/8" Flat Blade Shaft Replacement outboard tilt trim motor that will fit Yamaha 2005-UP 75 HP 4 Stroke, 2005-UP 90 HP 4 Stroke, 2-wire connection, 4-bolt mount, Includes O-ring & Coupler, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 6D8-43880-00 YAMAHA Tilt Trim Motor 6D8-43880-01 YAMAHA Tilt Trim Motor 6D8-43880-09 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Outboard Tilt Trim Motor - Late Model Mercury, 2-Wire Replacement outboard tilt trim motor that will fit late model Mercury 135, 150 XR6, Magnum lll, 175, 200, 225, 250 HP, 105-140 HP Jet, 2-wire connection, 2-bolt mount, Includes O-ring, Flat-blade shaft, Bullet Connector Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 8M0031551 MERCURY Tilt Trim Motor 8M0060140 MERCURY Tilt Trim Motor 828708 MERCURY Tilt Trim Motor 828708T MERCURY Tilt Trim Motor 878265A1 MERCURY Tilt Trim Motor 878265A4 SIERRA Tilt Trim Motor 18-6773 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Outboard Tilt Trim Motor - Yamaha, 2-Wire, 3 Bolt, Flat Blade Shaft Replacement outboard tilt trim motor that will fit Yamaha 1992-2002 90 HP, 1992-1995 50-90 HP, 1994 40 HP, 1996 70-90 HP, 1997-Up 60, 70, 90 HP, 2-wire connection, 3-bolt mount, Includes O-ring, Flat-blade shaft, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 6H1-43880-02 SIERRA Tilt Trim Motor 18-6781 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Arm for Standard Motor Adjustable 10.5"-14"- 12V  Replacement Arm for Standard Motor - 10.5 - 14" Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 90° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years

  IN STOCK! Garmin Force™ Freshwater Trolling Motors & Accessories   Garmin's Force™ Freshwater Trolling Motors and accessories are now in stock. Garmin brings aboard the most powerful and most efficient trolling motor available. Check it out today!     Move your fishing to a higher level with force. The Force trolling motor is the most powerful and most efficient trolling motor available. Wireless chartplotter connectivity provides navigation, autopilot and anchor lock features. Use the precise anchor lock to hold your boat in the same location while you fish. Force includes a convenient wireless foot pedal that provides instant control and responsiveness yet feels and steers like a cable-steered pedal. See more fish and structure clearly with integrated Ultra High-Definition scanning sonar. It also includes a handheld remote control with a built-in sunlight-readable display. The remote gives you complete control of the trolling motor and simple point-and-go gesture steering.       Specials    Closeouts   Remanufactured    Rebates

  Fish with force using the Force™ trolling motor. It's the most powerful, most efficient trolling motor available yet still extremely quiet. Wireless chartplotter connectivity provides navigation, autopilot and anchor lock capabilities. Use the precise anchor lock to hold your boat in the same location while you fish. The Force™ motor also includes built-in CHIRP traditional and Ultra High-Definition sonar that provides exceptionally clear images with imperceptible sonar noise interference from the motor. The highly efficient brushless motor operates at either 24V or 36V and uses less energy than the competition, so you can fish longer. It includes a wireless foot pedal that provides instant control and responsiveness — yet feels and steers like a cable-steered pedal. The handheld remote control allows you to navigate with simple point-and-go gesture steering.     Specials    Closeouts   Remanufactured    Rebates  

  Lowrance Ghost Trolling Motor - Now In Stock at CLR Marine !   Quiet by name, powerful by design, the Lowrance Ghost freshwater trolling motor helps anglers fish longer, run faster, and move in closer without spooking fish. Ghost’s revolutionary propulsion technology and brushless motor generate the most thrust and the longest run time of any trolling motor on the market. With integrated Lowrance sonar options, GPS anchoring, and a three-year warranty, there’s no reason not to believe in Ghost.     Own Your Spot - Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location, or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal.     Total Integration - Steer your boat, adjust your speed, set up route navigation, or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon, and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors.   Additional Key Features:   Reliable Silent Operation Fastest Top-End Speed Total Integration with HDS LIVE, HDS Carbon, and Elite Ti² Fly-By-Wire Steering Plug-and-Play Lowrance sonar Configurable Foot-pedal Interference Free Flexible Installation 360° Breakaway Mount Easy to Stow and Go       Specials    Closeouts    Remanufactured    Rebates