|
Waxed Whipping Twine - 0.8mm x 40M - Red
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - Red
Material - Polyester (PES)
Thickness - .03" (.8mm)
Length - 131' (40 M)
*Sold as an Individual
|
5.00 |
|
|
Waxed Whipping Twine - 0.8mm x 40M - Black
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - Black
Material - Polyester (PES)
Thickness - .03" (.8mm)
Length - 131' (40 M)
*Sold as an Individual
|
5.00 |
|
|
Waxed Whipping Twine - 0.8mm x 40M - Blue
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seam. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - Blue
Material - Polyester (PES)
Thickness - .03" (.8mm)
Length - 131' (40 M)
*Sold as an Individual
|
5.00 |
|
|
Waxed Whipping Twine - 0.5mm x 40M - White
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - White
Material - Polyester (PES)
Thickness - .02" (.5mm)
Length - 131' (40 M)
*Sold as an Individual
|
4.79 |
|
|
Waxed Whipping Twine - 1.0mm x 46M - White
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - White
Material - Polyester (PES)
Thickness - .04" (1.0mm)
Length - 150' (46 M)
*Sold as an Individual
|
6.38 |
|
|
Waxed Whipping Twine - 1.5mm x 32M - White
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - White
Material - Polyester (PES)
Thickness - .06" (1.5mm)
Length - 105' (32 M)
*Sold as an Individual
|
6.38 |
|
|
Waxed Whipping Twine Kit - 0.8mm x 40M - Dark Navy Blue
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color -Dark Navy Blue
Material - Polyester (PES)
Thickness - .03" (.8mm)
Length - 131' (40 M)
In the Box:
Spool of waxed whipping twine
Sailmakers needle
*Sold as an Individual
|
12.70 |
|
|
Waxed Whipping Twine Kit - 0.8mm x 40M - White
Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.
Technical Specifications:
Color - White
Material - Polyester (PES)
Thickness - .03" (.8mm)
Length - 131' (40 M)
In the Box:
Spool of waxed whipping twine
Sailmakers needle
*Sold as an Individual
|
12.70 |
|
|
Dyneema® Whipping Twine - 1.0mm x 50M - White
Excellent for whipping line ends, this twine is made of Dyneema® SK-75 for high breaking loads and a smooth surface. Easy to handle and requires no additional waxing.
Technical Specifications:
Color - White
Material - Dyneema® SK-75
Thickness - .04" (1.0mm)
Length - 164' (50 M)
*Sold as an Individual
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
15.92 |
|
|
Drop Nose Pin 8mm x 40mm
This drop-nose pin is manufactured from 316 stainless steel and barrel-finished for a smooth, high-shine surface finish. It has a spring-loaded mechanism that positively locks the pin in either the open or closed position. The standard head features an annular groove for attachment of a retaining wire if required for larger bespoke pins and retaining wires.
Specifications:
Working Length: 40mm
Pin Diameter: 8mm
Weight: 0.016kg
|
29.71 |
|
|
Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm² Red/Black - 100'
Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.91 |
|
|
Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm² Red/Black - 250'
Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.22 |
|
|
Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm² Red/Black - 500'
Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
123.48 |
|
|
Drop Nose Pin 8mm x 20mm
This drop-nose pin is manufactured from 316 stainless steel and barrel-finished for a smooth, high-shine surface finish. It has a spring-loaded mechanism that positively locks the pin in either the open or closed position. The standard head features an annular groove for attachment of a retaining wire if required for larger bespoke pins and retaining wires.
Specifications:
Working Length: 20mm
Pin Diameter: 8mm
Weight: 0.01kg
|
29.71 |
|
|
Drop Nose Pin 8mm x 30mm
This drop-nose pin is manufactured from 316 stainless steel and barrel-finished for a smooth, high-shine surface finish. It has a spring-loaded mechanism that positively locks the pin in either the open or closed position. The standard head features an annular groove for attachment of a retaining wire if required for larger bespoke pins and retaining wires.
Specifications:
Working Length: 30mm
Pin Diameter: 8mm
Weight: 0.014kg
|
29.71 |
|