General Purpose Block The 19mm carbon fiber sheave block range is designed for use with abrasive ropes for high-load applications. The outer cage is manufactured from marine-grade 316 Stainless Steel with a hollow stainless steel rivet through the center of a carbon fiber sheave.  Features: The block features a plain bearing, which is suited to higher load use A typical use for this block is for control lines, halyards, outhauls, furling lines, etc. Specifications: Weight: 10 g Breaking Load: 400kg

MareLube Valve General Purpose Lubricant - 4 oz. Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water.  Marelube Valve Lubricant is an advanced lubrication formula designed to keep valve seals and balls working smoothly in marine plumbing systems. It is a clear, non-staining and nontoxic lube that is perfect for traditional bronze fittings, as well as all composite plumbing fixtures like Forespar's Marelon parts.  Features: General Purpose PTFE Synthetic Lubrication Clear, Non-Staining and Non-Toxic Compatible With Bronze or Marelon Components Keeps Seals and Balls Working Smoothly

MareLube Valve General Purpose Lubricant - 16 oz. Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water.  Marelube Valve Lubricant is an advanced lubrication formula designed to keep valve seals and balls working smoothly in marine plumbing systems. It is a clear, non-staining and nontoxic lube that is perfect for traditional bronze fittings, as well as all composite plumbing fixtures like Forespar's Marelon parts.  Features: General Purpose PTFE Synthetic Lubrication Clear, Non-Staining and Non-Toxic Compatible With Bronze or Marelon Components Keeps Seals and Balls Working Smoothly

Series 40 All Purpose Block - Double Block - Full Swivel Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Head swivels freely. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Slotted pin shackle eliminates fouled lines Two way head post Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 600kg(1,320lbs) B. L.: 1,200kg(2,650lbs) Weight: 135g(4.8oz)

Adult General Purpose Life Vests - 4-Pack (2 Red, 2 Blue) The Onyx reusable storage bag fits four adult universal general-purpose vests. The bag keeps the vests all in one place and is great to have on your boat for those unexpected guests. The General Purpose vests are universal to fit chest sizes of 30"-52" and over 90 lbs. Available in 2 red and 2 blue colors.  Features: Clear, reusable storage bag with breathable mesh and carry strap Contains four adult universal general-purpose vests U.S. Coast Guard approved and Transport Canada approved

General Purpose Centrifugal Pump End Suction Centrifugal Pump The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 12 volts DC unless noted. WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Series 40 All Purpose Block - Single - Universal Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 71g(2.5oz)

Series 50 All Purpose Block - Single - Universal Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required Features: Exceptionally high working loads Low maintenance, long service life Self lubricating sheave Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Applications: Mainsheet and halyard applications, vang and spinnaker control lines on boats to 10M(33') Materials: Nylatron® sheave Grade 316 stainless steel load strap and head fitting Impact and U.V. resistant, fiber reinforced Nylon cheeks Specifications: Sheave Ø: 50mm(2") Max. Rope Ø: 12mm(1/2") Max. Pin Ø: 5mm(3/16") M.W.L.: 750kg(1,650lbs) B. L.: 1,500kg(3,310lbs) Weight: 118g(4.1oz)

3700 GPH General Purpose End Suction Centrifugal Pump - 24V The Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC.  Features: 3700-GPH 24-Volt White/Red 3-Year Warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule 19A 3700 General Purpose Pump 32V General Purpose Centrifugal Pump 32V, up to 3700GPH, Can Be Submersed, 1-1/2" Hose Ports, Delivers High Flow at Low Pressure, 7.5 Amp Draw  

Series 40 All Purpose Block - Single - Loop Top All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 54g(1.9oz)

Series 40 All Purpose Block - Single - Becket - Universal Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Becket pin is removeable so line can be spliced prior to fitting and is ingeniously locked into position without the use of a clevis pin, split ring or tools Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Snap fit removable becket pin Spare parts - RF150 Shackle, RF41010 Replacement Becket Pin Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 80g(2.8oz)

Series 40 All Purpose Block - Single - Stand Up All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Becket pin is removeable so line can be spliced prior to fitting and is ingeniously locked into position without the use of a clevis pin, split ring or tools. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Snap fit removable becket pin Spare parts - RF41010 Replacement Becket Pin Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 61g(2.2oz)

Series 40 All Purpose Block - Single - Stand Up All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Mount with 2 x 5mm (3/16") fasteners (not supplied) Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 400kg(880lbs) B. L.: 800kg(1,760lbs) Weight: 72g(2.5oz)

Series 40 All Purpose Block - Single - Cheek All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Mount with 3 x 5mm (3/16") fasteners (not supplied) Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 66g(2.3oz)