Round Red Dual USB Charger with 1 Quick Charge Port + This dual USB power socket (Red) is capable of charging two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently.  Features: A protective dust cap extends the life of the charger Constructed of aluminum and injection-molded nylon with terminal spade contacts Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires Machined round aluminum with no D flats Also fits the mounting bracket (426105) IP65 rating Specifications: Output DC: 5V/4.8A.  Input: 9-32VDC.  Diameter: 1-7/16 in. Length: 1-1/2 in. Height: 1-1/8 in. Volts: 9-32 Finish: Red anodized Weight: 0.06 lb.

12/24V Dual USB Charger - 1-1/8" Socket Mount Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices Charges at the speed required by specific devices Internal filtering for reduced electronic interference Over temperature protection Protective dust cap keeps debris and moisture out Conformal coated circuit board for the harsh marine environment Mounts in a common 1-1/8" hole Specifications Maximum Output Current:4.8A DC (total) Input Voltage:12V/24V DC Input Voltage Range:9-32V DC Output Voltage:5V DC ±5% Parasitic Current Draw:1mA Port Configuration:Intelligent Device Recognition Reverse Polarity Protection:Yes Short Circuit Protection:Yes Thermal Overload Protection:Yes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round Dual USB & USB-C Power Socket USB & USB-C Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger. Features:  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED illumination  IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/4.8A  Input 8-32VDC  USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an Individual

Round OLED Temperature Meter Fahrenheit with 6' Lead OLED (Organic LED) Temperature Meter is designed to withstand constant vibration and the rigors of a wet marine or dusty outback environment. Monitors temperature on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Same compact round size as a standard 12V receptacle, this OLED Temperature Meter provides many installation options. Injection molded nylon construction. Includes a prewired temperature sensor with a 6’ cable. IP66 rating.

Round Voltage Meter 5V-15VDC with Rainbow Dial This digital dual-round volt meter displays voltage for the main and auxiliary batteries simultaneously. With the same compact size as a standard 12V receptacle socket, this volt meter supports many installation options.  Features: Constructed of injection-molded nylon Red LED display IP65 rating Specifications: Input: 10-48VDC. Diameter: 1-7/16 in. Length: 1-3/8 in. Height: 1-1/8 in. Volts: 10-48 Weight: 0.04 lb.

Round Red LED Temperature Meter The temperature meter includes a prewired temperature sensor with a 6-foot cable and it monitors temperature on a bright LED screen.  Features: Reverse polarity protected The same compact round size as a standard 12VDC receptacle, this temperature meter supports many installation options Constructed of injection-molded nylon Installation is as easy as drilling a 1-1/8-in. hole, inserting the socket body, tightening the locking nut, and connecting the wires IP67 waterproof rating 12-24VDC Specifications: Diameter: 1-7/16 in. Length: 1-1/16 in. Height: 1-1/8 in. Volts: 12-24 Temperature Range (Fahrenheit): -67 degrees to 248 degrees  Weight: .02 lb.

Round Rainbow Voltmeter with USB & USB-C Power Socket Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information.  Includes an On/Off button to conserve battery power when not needed.  Features:  Red/orange means the voltage is too low  Green means voltage is normal  Rainbow volt meter reads voltage up to 14.6 volts Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8” hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)  RoHS compliant & IP65 rating Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an Individual

Double USB & Power Socket Panel with Breaker Switch  This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24V. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. Includes 16A breaker switch. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 5.25" x 3" (190.5 x 133.35 x 76.2mm) In the Box: 8121 Panel Labels Mounting hardware *Sold as Individual 

8421 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - White Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm) In the Box: 8421 Panel Labels Mounting hardware *Sold as Individual

8521 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm) In the Box: 8521 Panel Labels Mounting hardware *Sold as Individual 

SEA-DOG Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.

JOHNSON PUMP 4000 GPH BILGE PUMP 1-1/2" DISCHARGE PORT   Heavy Duty Bilge Pump 4000 Series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.   See More information   Discount Coupon Code 4000GPH      

1038 48V Dual USB Charger Contura Switch Mount Intelligent device recognition maximizes charge rate for phones, tablets, or other mobile devices. Features: Ideal for golf carts and other 48V systems Spring-hinged lid keeps debris and moisture out Charges at the speed required by specific devices Internal filtering for reduced electronic interference Over temperature protection Conformal coated circuit board for the harsh marine environment Mounts in an existing contura switch aperture Specifications: Max Output Current: 4A DC (total) Input Voltage: 48V DC Input Voltage Range: 32-64V DC Reverse Polarity: Yes Short Circuit Protection: Yes Thermal Overload Protection: Yes USB: 2.0, Type A

Dual USB Charger - 24V Contura Mount Protective dust cap with tether keeps dust and spray from shortening the life of the charger. Made with corrosion resistant materials which ensure a solid contact and low voltage drop. Features: Compatible with popular mobile devices including Apple products Protective dust cap Conformal coated circuit board for the harsh marine environment Easy to use Easy to install in existing Contura switch aperture providing convenient access for charging mobile devices Specs: Maximum Output Current: 2.1A DC Input Voltage: 12V DC, 24V DC Parasitic Current Draw: 15mA Reverse Polarity Protection: Yes Short Circuit Protection: Yes Thermal Overload Protection: Yes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.