|
Horizontal Multi Cable Seal - Black
The DS-H-MULTI-BLK takes Scanstrut's much-loved multi-cable seal to the next level. The multi-horizontal cable seal was designed to open new multi-cable routing options. This Scanstrut seal helps users achieve an ultra-clean, easy-to-fit, and 100% watertight installation of large electronics, solar, and light cables
Features:
Designed for the installation of large electronics, solar, and light cables
100% waterproof– IP68
Designed to fit one to four cables of varying sizes
Self-drill, easy installation that cuts down your installation time through wood, metal, and GPR
Long-life marine-grade glass-filled Nylon
Rigorously tested to be UV stable and hard-wearing
There is no messy sealant on the bung
A low-profile construction with a height of 35.8mm
It is designed to have a compact footprint of 114.8 mm in width and 97.6mm in length.
Captive nuts make for easy assembly and reliable repeat installation
|
38.45 |
|
|
Horizontal Double Cable Seal - Black
The DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. The seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two cables externally to internally on the roof of boats. Its low-profile design provides the best water ingress protection in class.
Features:
Designed for two cables
IP68 watertight seal
Compact footprint - just 66.5mm (2.61”) W / 75.1mm (2.95”) L / 28.5 mm (1.12”) H
Easy-fit cable routing that cuts down your installation time through wood, metal, and GRP
Black high-impact plastic
Includes 316 stainless steel fixings and a waterproof 3M gasket
The low-profile construction is impact-resistant and provides extra protection from water
The materials have been selected to be UV- stable and hard-wearing
No messy sealant on bungs
Install 2 cables – select any combination:
6mm x 2
7mm x 2
8mm x 2
9mm x 2
10mm x 2
Blank x 2
|
30.35 |
|
|
DS-HD6-BLK Horizontal Double Cable Seal - Black
The best compact horizontal double-entry cable seal
The DS-HD6-BLK double horizontal cable seal was designed to eliminate the time-consuming and sub-standard routing of solar panel cables. This seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two solar panel cables externally to internally on the roof of boats.
This horizontal double-entry cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating.
Installs two (2) cables.
Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) up to - .23" (6 mm)
Height - .87" (22 mm)
Width - 2.13" (54 mm)
Color - Black
Orientation - Horizontal
Material - Plastic
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Individual
|
22.92 |
|
|
Horizontal (90°) Cable Seal - Black
The Seaview horizontal (90-degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6/IPX8 tested and approved.
|
27.84 |
|
|
DS-MULTI Cable Seal Plastic - Black
Designed to provide a quick and easy installation for multiple cables. Supplied with an undrilled seal allowing you to custom-drill holes to match your cable requirements. Designed for multiple cables up to Ø15mm (0.59"), DS-MULTI-P-BLK is perfect for solar panels, lights, and other rooftop electronics. Constructed from high-impact plastic, DS-MULTI-P-BLK is UV- stable and hard-wearing providing a 100% watertight seal no matter the weather.
Features:
IP68 Waterproof
Designed to fit multiple cables up to 15mm (0.59") in diameter
UV resistant
Supplied with undrilled bungs and made from marine-grade black high-impact plastic
No messy sealant on the bung
Easy-fit cable routing that cuts down your installation time
A guaranteed 100% watertight seal
Designed for a range of cable diameters making it ideal for almost every installation
Perfect for solar panels, light bars, lights, and other rooftop electronics
|
31.02 |
|
|
DS-H10-BLK Horizontal Cable Seal - Black
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .24" to .39" (6 - 10 mm)
Height - 1.06" (27 mm)
Width - 1.75" (44.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Individual
|
21.71 |
|
|
DS-H10-BLK Horizontal Cable Seal- Black *3-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .24" to .39" (6 - 10 mm)
Height - 1.06" (27 mm)
Width - 1.75" (44.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Three (3) Pack
|
64.32 |
|
|
DS-H10-BLK Horizontal Cable Seal- Black *5-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .24" to .39" (6 - 10 mm)
Height - 1.06" (27 mm)
Width - 1.75" (44.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Five (5) Pack
|
107.21 |
|
|
DS-H6-BLK Horizontal Cable Seal - Black *3-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .08" to .24" (2 - 6 mm)
Height - .79" (20 mm)
Width - 1.12" (28.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as a Three (3) Pack
|
46.15 |
|
|
DS-H6-BLK Horizontal Cable Seal - Black *5-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .08" to .24" (2 - 6 mm)
Height - .79" (20 mm)
Width - 1.12" (28.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as a Five (5) Pack
|
76.92 |
|
|
DS-H6-BLK Horizontal Cable Seal - Black
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .08" to .24" (2 - 6 mm)
Height - .79" (20 mm)
Width - 1.12" (28.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Individual
|
15.58 |
|
|
Black Anodized Aluminum Low-Profile Multi Cable Seal for Cables Up to 15mm
The DS-LP-MULTI-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 71% in comparison to Scanstrut's DS-MULTI-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for multiple cables up to 15mm (0.59”)
UV Resistant
Constructed from marine-grade aluminum
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
75.60 |
|
|
Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mm
The DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for multiple cables up to 15mm (0.59”).
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
95.86 |
|
|
DS30-P-BLK Vertical Cable Seal - Black *3-Pack
Scanstrut premium IP68 waterproof cable seal provides easy-fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables.
Features:
Watertight installation - 100% waterproof with an IP68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and the outer dome provides an additional water shield.
Technical Specifications:
Fits cable size (diameter) - .35" to .55" (9 - 14 mm)
Fits connector size up to 1.18" (30 mm) in diameter
Height - .81" (20.5 mm)
Color - Black
Orientation - Vertical
Material - ASA Plastic
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as a Three (3) Pack
|
70.18 |
|
|
DS30-P-BLK Vertical Cable Seal - Black *5-Pack
Scanstrut premium IP68 waterproof cable seal provides easy-fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables.
Features:
Watertight installation - 100% waterproof with an IP68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and the outer dome provides an additional water shield.
Technical Specifications:
Fits cable size (diameter) - .35" to .55" (9 - 14 mm)
Fits connector size up to 1.18" (30 mm) in diameter
Height - .81" (20.5 mm)
Color - Black
Orientation - Vertical
Material - ASA Plastic
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as a Five (5) Pack
|
116.96 |
|