164 1.5" Ball Mount with Sounder Plate The Scotty 164 provides a mounting receptacle for 5-7″ screens from all major electronics brands. Features: Engineering-grade nylon and Stainless steel construction Easy grip t-knob tightens down for optimal hold strength and simple adjustments Compatible with all 1.5″ Scotty ball mounting system accessories The corrosion-proof construction of this system provides a long service life in both fresh and saltwater applications Dual ball joints provide infinite flexibility for positioning

163 1.5" Ball Mount with Fishfinder & Universal Mounting Plate The latest edition to Scotty's ball mounting system is the 1.5” ball mount. Features: The bigger ball design gives you a much greater clamping force for larger accessories while still having a smooth full range of motion The 163 top plate has been designed to accept large fish finders Dimensions: Base Mount Dimensions: 2 ¼” x 2 ¼” Mount Height Stands: 6.5” Tall

162 1.5" Ball Mount with Gear Head Post & 241 Side Deck Mount The latest edition to Scotty's ball mounting system is the 1.5” ball mount. Features: The bigger ball design gives you a much greater clamping force for larger accessories while still having a smooth full range of motion  Click and lock any Scotty post mount accessory into the Gear Head  Designed for use with Scotty Baitcaster Spinning & Fly Rod Holders Dimensions: Base Mount Dimensions: 2” x 4” Mount Height Stands: 10” Tall

1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 Only The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds. Features: Compatible Devices: Humminbird Helix 5 Center to Center Hole Pattern: 1" x 2.5" Weight Capacity: 10 lbs. Overall Height: 5.225" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Hardware for mounting to device not included with purchase. Weight: 0.19 lbs.

160 1.5" Ball Mounting System for 7-9" Screens Components: 161 1.5" Ball System Arms 165 1.5″ Ball System Top Plate 166 1.5″ Ball System Base 161 1.5" Ball System Arms Features: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 165 1.5″ Ball System Top Plate Features: The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners(sold separately) 166 1.5″ Ball System Base Features: Engineering-grade nylon and Stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately)

1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 Only The RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists of a short double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. The unique rubber ball and socket technology dampens shock and vibration while offering high adjustibility to achieve the perfect viewing angle. Features: Compatible Devices: Humminbird Helix 7 Overall Length: 5.225" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.1 lbs.

RAM 1.5" Ball Mount with Track Ball™ Base & 2" x 4" Plate for the Humminbird Helix 7 ONLY The RAM-202-24-354-TRA1U consists of a double socket arm mount, Track Ball™ base and 2" x 4" rectangular plate. The unique rubber ball and socket technology dampens shock and vibration while offering high adjustibility to achieve the perfect viewing angle. Compatible with any RAM Tough-Track™ system. Compatible Devices: Humminbird Helix 7 Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in polybag

RAM 1" Diameter Ball Mount w/2 Diamond Bases The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern) The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern) The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern) The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Ball Base w/Strap 0.5" to 2" Diameter The RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length) The RAM-B-101U-C consists of a long double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.3125" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

161 1.5" Ball System Arms Features: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately)

166 1.5″ Ball System Base Features: Engineering-grade nylon and Stainless steel construction Compatible with all 1.5″ Scotty ball system accessories Multi hole top plate fits most popular electronics brands UV resistant engineering grade nylon construction Corrosion resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately)