|
Large Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18.5" x 15.5" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
337.50 |
|
|
Large Offset Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 tapered Phillips machine screws, fender washers, and lock nuts
3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
405.00 |
|
|
Small Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18.5" x 13.5" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
274.50 |
|
|
Large Offset Trolling Motor Plate
The trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.
Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate. (18.5” x 15.5” x 1/2”).
Suggested Hardware:
1/4" - 20 phillips flat head machine screws
Fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54
|
317.65 |
|
|
20" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
20" x 8" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
180.00 |
|
|
14" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
14" x 8" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
157.50 |
|
|
16" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
172.50 |
|
|
18" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18" x 8" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
175.50 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|
|
Small Offset Trolling Motor Plate
The trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.
Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate (18.5" x 13.5" x 1/2").
Suggested Hardware:
1/4" - 20 phillips flat head machine screws
Fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54
|
258.35 |
|
|
20" Straight Trolling Motor Plate
This trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.
1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).
Specifications:
Plate Dimensions (inches): 20" x 8" x ½”
Suggested Hardware:
1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62
|
175.61 |
|
|
14" Straight Trolling Motor Plate
This trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.
1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).
Specifications:
Plate Dimensions (inches): 14" x 8" x ½”
Suggested hardware:
1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62
|
153.66 |
|
|
16" Straight Trolling Motor Plate
This trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.
1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).
Specifications:
Plate Dimensions (inches): 16" x 8" x ½”
Suggested Hardware:
1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62
|
168.29 |
|
|
18" Straight Trolling Motor Plate
This trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.
1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).
Specifications:
Plate Dimensions (inches): 18" x 8" x ½”
Suggested Hardware:
1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts
316 stainless steel is ideal for corrosion prevention
Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62
|
171.22 |
|
|
Trolling Motor Mount f/GT36 and GT56
Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.
|
22.49 |
|