|
SI-TEX 300/50/200T Bronze Thru-Hull Transducer
Dual Frequency 50/200 kHz
Max Power: 600W
Beam Angle: 43 deg. @ 50 kHz, 9 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: Two 8 pin
Cable: 30'
Temp: Yes
Speed: No
For SI-TEX model: CVS208/209
|
131.99 |
|
|
SI-TEX706/50/200T Bronze Thru-Hull Trandsucer
Dual Frequency 50/200 kHz
Max Power: 1kW
Beam Angle: 14 x 20 deg. @ 50 kHz, 7 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: Two 8 pin
Cable: 30'
Temp: Yes
Speed: No
For SI-TEX model: CVS208/209/210/211
|
672.00 |
|
|
SI-TEX 496/50/200ST Bronze Thru-Hull Transducer w/ Fairing Block f/ ES502
Dual Frequency 50/200 kHz
Max Power: 500W
Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: ES502
|
252.00 |
|
|
707/50/200T-CX Bronze Thru-Hull Transducer
1kW, Bronze with temp recommended for deep water use (Beam angle: 14' x 21' @50kHz, 3' x 5' @200kHz)
|
441.00 |
|
|
Thru-Hull Transducer
SI-TEX Thru -Hull Transducer for the SVS-650, CVS-126 and CVS-128
|
239.40 |
|
|
120kHz Bronze Thru-Hull Transducer f/SDD-110
Features:
120kHz
Bronze
Thru-Hull Transducer
Specifically for SI-TEX SDD-110
|
145.46 |
|
|
120 kHz Lexan Low-Profile Thru-Hull Transducer f/SDD-110 Seawater Depth Indicator.
|
100.80 |
|
|
SI-TEX 307/50/200T Transducer f/CVS-832
Dual Frequency 50/200 kHz
Max Power: 1kW
Beam Angle: 22 x 45 deg. @ 50 kHz, 6 x 11 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: No
For SI-TEX model: CVS862, 832C, 833C, Genesis
|
197.99 |
|
|
250C/50/200ST-CX Transom Mount Transducer
SI-TEX 250C/50/200ST-CX Transom Mount Transducer for the CVS-126 and CVS-128.
|
180.60 |
|
|
1700/50/200T-CX Transducer
Bronze thru-hull transducer with temp only (Beam angle: 45 degrees @ 50kHz, 11 degrees @ 200kHz) w/30'cable attached to the transducer.
|
168.00 |
|
|
Bronze Thru Hull Transducer
Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers.
Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
390.94 |
|
|
B275LH-W Bronze Thru-Hull Transducer - 12-Pin
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH).
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000')
25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500')
25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Bronze transducer housing with high-performance fairing for optimal performance at higher speeds
Recommended boat size: 8 m (25') and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2294.99 |
|
|
XPTH-9-HW-MSI-T MEGA SI+/DI+ Dual Spectrum CHIRP Plastic Thru-Hull Transducer with Temp
MEGA Side Imaging+ Plastic Thru-Hull Transducer supports MEGA Imaging/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N.
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHRIP Max Depth: 1200ft (365m)
MEGA Side Imaging+ Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (m)
MEGA Down Imaging+ Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
436.39 |
|
|
B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin
Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Features:
Fixed 20° tilted version for 16° to 24° hull deadrise
12 Pin Connector for Garmin FishFinders
Depth and fast-response water-temperature sensor
1 kW with depth tracking down to 400 m (1,300#39;)
Medium frequency: 60-100 kHz
57° to 73° beamwidth (port/starboard)
16° average fore/aft
40 kHz of total bandwidth from one transducer
Medium frequency for superior mid-depth performance and excellent fish-target separation
Bronze housing for use on stepped, planing, or displacement hull
Low-profile, thru-hull housing yields good resolution at speed when installed properly
Exclusive Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 9 m (30'), 10 m (33')
Common Use: Fishing
Connector: Garmin 12-Pin
Country of Origin: USA
Display Connector: 12G
Functions: Depth, Temperature
Hole Size: 95 mm (3-3/4")
Hull Material: Fiberglass or wood
Material: Bronze
Max Deadrise Angle: 24°
Max Depth: 400 m (1300')
Max Vessel LOA: Up to 11 m (36')
Medium Frequency: 60-100 kHz
Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft)
Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a
Mounting Style: Tilted Element Thru-Hull
Power Rating: 1 kW
Single or Dual Frequency: Single
Tilt Angle: 20°
Tilted Element: Yes
Water Temperature: -10° to 40°C (14° to 104°F)
Weight: 2.7 kg (6 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1742.39 |
|
|
B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin
The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze transducer housing
Boat Size: 8M (25') and up
Specifications:
Weight: Bronze - 0.9 kg (2.0 lb)
Hull Deadrise: Up to 8°
Acoustic Window: Urethane
Hole Diameter: 51mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|