SI-TEX 496/50/200ST Bronze Thru-Hull Transducer w/ Fairing Block f/ ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: 8 pin Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502

SI-TEX 300/50/200T Bronze Thru-Hull Transducer Dual Frequency 50/200 kHz Max Power: 600W Beam Angle: 43 deg. @ 50 kHz, 9 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: Two 8 pin Cable: 30' Temp: Yes Speed: No For SI-TEX model: CVS208/209

B45-DT-HB 600W Thru-Hull Transducer w/Fairing Block & Humminbird #9 Connector The B45 is our smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape and High Performance fairing block deflects aerated water from the transducer's face for strong return echoes and clear display images.  Features: Bronze housing Depth and Temperature Recommended for planing-hull powerboats and cruising sailboats up to 9 m (30’) Good sensitivity in a compact housing Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) High-Performance Fairing included Usable Shaft Length: 92 mm (3.62”) Standard fairing block  Frequency: 50/200 kHz Maximum Depth Range: 50 kHz—235 m to 353 m (800’ to 1,200’) 200 kHz—118 m to 206 m (400’ to 700’) Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SI-TEX706/50/200T Bronze Thru-Hull Trandsucer Dual Frequency 50/200 kHz Max Power: 1kW Beam Angle: 14 x 20 deg. @ 50 kHz, 7 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: Two 8 pin Cable: 30' Temp: Yes Speed: No For SI-TEX model: CVS208/209/210/211

B265LH Bronze Chirp Thru Hull 1kW with Fairing Block Requires Mix and Match Cable Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology. Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° port-starboard beamwidth High—CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing with High-Performance Fairing Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Panoptix™ PS70 Thru-Hull Transducer with Fairing Block SEE FISH LIVE. CATCH FISH DEEP. The Panoptix PS70 stainless steel thru-hull transducer is powered by Garmin RapidReturn™ sonar, which gives you live sonar views up to 1,000’ below the surface. Live sonar up to 1,000' Multiple sonar modes Wide sonar beam Image stabilization Thru-hull mounting 800-watt power output Garmin RapidReturn Sonar This sonar sends multiple simultaneous pings through the water column. The result is live sonar capabilities up to 1,000’, giving deep-sea anglers a real-time view of what’s below the surface. LiveVü™ Down Sonar See real-time live sonar images up to 1,000’. With Garmin RapidReturn, anglers can see small baitfish and target game fish in real-time. The wide 120-degree beam angle covers huge areas of water. Traditional Sonar View crisp, clear fish arches with excellent separation of targets under the boat. Triple-Beam Sonar Get a 3-way traditional sonar split that gives sonar returns from the port and starboard directions and targets directly under the boat in an easy-to-understand traditional sonar view. Adjust the beam angles to fine-tune your 3 columns of sonar data. RealVü™ 3D Sonar Historical scanning technology helps find fish and build a map of the ocean floor while your boat is moving. It shows the entire water column you have passed over in 3D, from the bottom to the surface, and all fish in between. The True Motion 3D sonar returns feature now follows the vessel’s course over the ground. Quickdraw Contours Feature Survey areas of the ocean floor in great detail. New QuickDraw Contours feature improvement allows users to survey wide swaths of the ocean floor, even at depths up to 1,000’. Live Sonar Display Rate Panoptix PS70 will display at a minimum of 10 frames per second (6 to 8 times faster than the competition), which results in faster sonar returns. Wide Sonar Beam Locate bait and fish quickly with a wide 120-degree by 8-degree sonar beam, which covers more water columns at once. Image Stabilization An internal sensor will stabilize sonar returns, giving you a clear view even in rough waters. Thru-Hull Installation The stainless steel thru-hull transducer can be flush-mounted or pocket-mounted. A fairing block allows for deadrise angles of 0 to 20 degrees. The optional fairing block can survive high operating speeds and withstand the rough conditions found offshore. High-Power Sonar 800-watt power output gives you stronger sonar penetration through the water. In the Box: PS70 down-looking thru-hull down transducer Fairing block Stainless steel thru-hull mounting hardware Power cable Network cable 40 ft (12 meters) with network adapter Documentation General Dimension: 8.50" x 4.49" x 9.61"  Weight: 10.12 lbs Waterproof: IPX7 Transducer Beamwidth: 120° x 8° Transducer Cable Length: 8 ft + 40 ft Extension Temperature Range: 0°C to 40°C Electrical Features: Power Input; 10-35v Power Usage: 35w Fuse: 7.5a Sonar Features Frequency: 190-210 kHz Transmit Power: 800w Maximum Depth: Saltwater 1000' Sonar Type: Multi-beam phased array Connections Garmin Marine Network ports: 1 (small connector) Sonar Modes RealVü 3D Historic: Yes 3-Beam Traditional: Yes Traditional Sonar Source: Yes WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

SI-TEX 492/50/200ST Transom Mount Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: Transom Plug: 8 Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502

SI-TEX 250/50/200ST Transom Mount Transducer Dual Frequency 50/200 kHz Max Power: 600W Beam Angle: 45 deg. @ 50 kHz, 11 deg. @ 200 kHz Housing: Plastic Mount: Transom Plug: 8 pin Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: CVS106MKIIDF, 106L, 106MKII, 832, 833, Genesis

Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with Speed and Temperature 30 Foot Cable with 10-Pin Connector High-Speed Fairing Block Included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SI-TEX 250C/50/200ST Transducer Dual Frequency 50/200 kHz Max Power: 1kW Beam Angle: 45 deg. @ 50 kHz, 11 deg. @ 200 kHz Housing: Plastic Mount: Transom Plug: 8 pin Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: CVS832C, 833C, Genesis

250C/50/200ST-CX Transom Mount Transducer SI-TEX 250C/50/200ST-CX Transom Mount Transducer for the CVS-126 and CVS-128.

Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with Speed and Temperature 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

CPT-70 Plastic Thru Hull Transducer Urethane Through Hull Transducer with Fairing Block. The CPT-70 requires A80332 Adapter Cable (if you have a green locking collar on the unit.) Features Plastic Thru Hull Max Depth: DV=600ft/FF=900ft Beam Width: 25°/60° Depth and Temperature Cable Length: 33ft/10M Deadrise: 0-25°

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.