|
PT2004 - PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish. Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHRIP radar
ICOM - MR-1010RII radar
Intellian - FB150 in i3, FBR250 in i3, FBR250R in i3, i3 radars
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - 37STV, QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Sea-Tel - Coastal 14 radar
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Hollow stem allowing internal routing of all cables
Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.
Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.
Technical Specifications:
Radar Type - Dome
Material - Composite
Height - 6.2"" (158mm)
Mounting Type - Aft leaning - 30°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
384.07 |
|
|
PT2005 - PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish. Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars
Humminbird - AS 21 RD4KW radar
Intellian - i1 radars
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000 radars
Koden - 2kW 12" radar
KVH - TracVision M1 and TV1 radars
Lowrance - LRA-1800, RB714A, DX42, LRA-2400 HD radars
Majestic - SATMAR32 radar
Navman - 8000 Series (8084 and 8120) 18" radars
Nobletec - 2kW - 20" radars
Northstar - M Series 18" and 24" 8000i radars
Raymarine - 33STV radars
Seiwa - SWR-1, 8, 9 radars
Simrad - GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 Radars
Features:
Hollow stem allowing internal routing of all cables
Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.
Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.
Technical Specifications:
Radar Type - Dome
Material - Composite
Height - 6.2"" (158mm)
Mounting Type - Aft leaning - 30°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
384.07 |
|
|
SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars
Humminbird - HB2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Nobletec - 4KW radars
Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars
Sitex - RADARpc-4D
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Stainless Steel
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Stainless Steel
Height - 6" (152mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
384.07 |
|
|
APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - Black
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-150-02 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars
Humminbird - AS 21 RD4KW radar
Intellian - i1 radars
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
KVH - TracVision M1 and TV1 radars
Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars
Majestic - SATMAR32 radar
Navman - 8000 Series (8084 and 8120) 18" radars
Nobletec - 2kW - 20" radars
Northstar - M Series 18" and 24" 8000i radars
Raymarine - 33STV radars
Seiwa - SWR-1, 8, 9 radars
Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 Radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24"
Humminbird - AS 21RD4KW
Inerphase - Mini RE-1, 8, 9
JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000
Koden - 2kW 12"
Lowrance - LRA-1800/RB714A/DX42
Navman - 8000 Series - 18"
Seiwa - SWR-1, SWR-8, SWR-9
Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S
Sitex - MDS-1, 8, 9, 12, NKE-1066
Techmarine - T72.01, T72.02, T-72.04
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Stainless Steel
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Stainless Steel
Height - 6" (152mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
384.07 |
|
|
APT6002 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning
Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
Compatible with:
Garmin - GMR Fantom 254, 256, 54, 4, 6 radars
Humminbird - RH 44 radar
JRC - JMA 2343 / 5104 (Radome: NKE-2042) radar
Koden - 12kW [RB717A], 25kW [RB717A], 4kW [ RB716A], 6kW [ RB716A], 6kW [RB717A] radars
Lowrance - LRA 4000, 5000 radars
Navman - 8000 Series (8084/8120) 4' radars
Nobeltec - 4kW / 6kW radars
Northstar - M series/8000i (4' and 6') radars
Seiwa - SWR-10 (3.5' and 4.5') radars
Simrad -GB40 / NX40/45 / NSE8/12, DX64S radars
Sitex - MDS -10 (4' and 5'), RADARpc - 3.5 or 4.5 radars
Techmarine - T-74.05 and T-74.06 radars
Features:
Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad, and Furuno
Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower®
Constructed from the best marine-grade aluminum
Paint finishes comply with our unique 4 step marine paint system
Technical Specifications:
Radar Type - Open Array
Material - Aluminum
Height - 6.9" (158mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
358.94 |
|
|
APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning
Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
Compatible with:
Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars
Garmin - GMR 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, 404, 406, 424 xHD2, 624 xHDS2, 626 xHD2 radars
JRC - JMA 2344 / 5106 / 5206 (4') and JMA 2344 / 5106 / 5206 (6') radars
Navman - 8000 Series (8084/8120) 4" radars
Onwa - KRA-3002/4001 radars
Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3'/4'/6', Magnum 4' 4kW/12kW, Magnum 6' 4kW/12kW radars
Simrad - HALO 3/4/6 Pulse radars
Sitex - MDS - 10 (4'), 10 (5') and RADARpc - 3/54.5 radars
Features:
Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad and Furuno
Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower®
Constructed from the best marine-grade aluminium
Paint finishes complies with our unique 4 step marine paint system
Technical Specifications:
Radar Type - Open Array
Material - Aluminum
Height - 5.91" (150mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
401.63 |
|
|
APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars
Humminbird - AS 21 RD4KW radar
Intellian - i1 radars
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
KVH - TracVision M1 and TV1 radars
Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars
Majestic - SATMAR32 radar
Navman - 8000 Series (8084 and 8120) 18" radars
Nobletec - 2kW - 20" radars
Northstar - M Series 18" and 24" 8000i radars
Raymarine - 33STV radars
Seiwa - SWR-1, 8, 9 radars
Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 Radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
APT-250-01-B - Aluminum PowerTower® Radar Mount - 10" Aft Leaning - Black
The Scanstrut Aluminum PowerTower® is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars
Humminbird - AS 21RD4KW radar
Intellian - i1 radar
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
KVH - TracVision M1 and TV1 radars
Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Majestic - SATMAR32 radar
Navman - 18" and 24" Series 8000 radars
Nobletec - 2kW (20") radars
Northstar - 18" and 24" M Series/8000i
Raymarine - 33STV radar
Seiwa - SWR-1, 8 and 9 radars
Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 3.5/4.5 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars
Humminbird - AS 21RD4KW radar
Intellian - i1 radar
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Navman - 18" and 24" Series 8000 radars
Nobletec - 2kW (20") radars
Northstar - 18" and 24" M Series/8000i
Seiwa - SWR-1, 8 and 9 radars
Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|