Single Ball Bearing Block Single block with aluminum cheeks and ball bearing sheave. Delrin™ ball bearing sheave ensures low-friction operation. Swivel head may be locked in place to avoid twist.  Specifications: Sheave Diameter 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm) SWL 1500 lbs. (680kg) Weight 5oz. (142g) Max Line 7/16" (11mm)

Series 30 Ball Bearing Block Single Becket Option Lashing Ball Bearing Blocks™ boast the highest strength-to-weight ratio available.  This is achieved through all-composite reinforced polymer materials and multiple attachment options. Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fibre-reinforced composites in the block head, cleat arms and beckets.  Highest Working Load in its Class The proven Ronstan 2-stage bearing system (Series 30 and larger) features high compression grade Acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range. The sheave and bearing system is supported by a fibre-reinforced load frame, computer modelled and optimised using advanced stress analysis methods. The Dyneema® Link, used in multi-sheave blocks, is produced from high spec SK75 fibre, which is 10 times stronger and lighter than steel, and provides the final connection from the block to the load point. Simple, Versatile & Secure Attachment The single block is easily lashed to an attachment point, and can also accept Dyneema® Links and shackles for a variety of efficient attachment alternatives. The Dyneema® Link used in multi-sheave blocks is easily fitted and secured by a removable pin. The Dyneema® Link can also be removed and replaced by a shackle, custom lashing or strop. These blocks are far more compatible with Dyneema®/Spectra® lines, carbon laminate connection points and webbing than traditional blocks with steel loop tops or shackles. Low Profile & Compact The two way head in the single lashing block allows for alignment at 0° or 90° orientation, while the single swivel block allows for full articulation. The flexible Dyneema® Link used in multi-sheave blocks provides 0° or 90° orientation. It connects directly to the head of the block rather than to an intermediate head post. This reduces weight and gives the lowest possible profile while allowing full articulation. Beckets have been carefully designed to minimise height. Features: Lightweight Highest working load in its class Secure, versatile and secure attachement Low profile and compact Ultra low profile thru-sheave becket Self-lubricating Nylatron® sheave and full contact bearing for high dynamic loads Applications: Mainsheet systems and spinnaker sheets on dinghies to 5M(16') Halyard, vang and backstay applications on boats to 5M(16') Control line applications on larger yachts

Series 30 Ball Bearing Block - Single - Loop Top Features: Low friction 2-stage ball bearing system provides consistent performance over the full working load range High static and dynamic load capacity Light weight Versatile head fittings Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction Can be fitted with a shackle in either of two planes to allow correct alignment of the block Applications: Primary lead blocks on dinghies and catamarans Control lines on larger yachts Materials: U.V. stabilized Acetal sheaves Acetal ball bearings Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks Grade 316 stainless steel load straps and head fittings Specifications: Sheave Ø: 30mm(1-3/16") Max. Rope Ø: 8mm(5/16") M.W.L.: 300kg(660lbs) B. L.: 750kg(1,650lbs) Weight: 28g(1.0oz)

Series 30 Utility Ball Bearing Block - Single, Swivel Shackle Head Features: Low friction 2-stage ball bearing system provides consistent performance over the full working load range. High static and dynamic load capacity. Light weight Versatile head fittings Product Information: Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Can be fitted with a shackle in either of two planes to allow correct alignment of the block. Applications: Primary lead blocks on dinghies and catamarans Control lines on larger yachts Materials: U.V. stabilized Acetal sheaves Acetal ball bearings Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks Grade 316 stainless steel load straps and head fittings

Series 40 Ball Bearing Block - Single Upright Lead Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Precision molded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range. Applications: Typically used for halyards at the mast base. Materials: Acetal ball bearings UV stabilized Acetal sheave Grade 316 stainless steel load housing

Series 15 Ball Bearing Block - Triple Features: Smallest and lightest ball bearing block available Precision molded acetal sheave running on stainless steel ball bearings provide high performance & low friction Single loop head blocks include an O-ring to separate running line from head lashing or fixing Applications: Dinghy control lines Vangs, cunninghams and tweakers Shock cord tensioning systems Materials: BB sheaves: UV stabilized acetal Ball bearings: Stainless steel Cheeks: Grade 316 stainless steel

Series 30 Utility Ball Bearing Block - Single, Becket, Swivel Shackle Head Features: Low friction 2-stage ball bearing system provides consistent performance over the full working load range. High static and dynamic load capacity. Light weight Versatile head fittings Cheek cut-outs for easy bearing maintenance Product Information: Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range. Applications: Primary lead blocks on dinghies and catamarans Control lines on larger yachts Materials: U.V. stabilized Acetal sheaves Acetal ball bearings Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks Grade 316 stainless steel load straps and head fittings

Series 20 Ball Bearing Block - Single - Exit Cover Plate Features: Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Applications: Exit blocks minimise friction in lines passing through the deck or exiting masts and booms Materials: UV Stabilized Acetal sheave Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 20mm(3/4") Max. Rope Ø: 6mm(1/4") PinØ: 4mm(5/32") M.W.L.: 250kg(550lbs) B. L.: 1,000kg(2,200lbs) Weight: 22g(0.8oz)

Series 30 Utility Ball Bearing Block - Stand-up, Loop Top Features: Low friction 2-stage ball bearing system provides consistent performance over the full working load range. High static and dynamic load capacity. Light weight Versatile head fittings Priduct Information: Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range. Applications: Primary lead blocks on dinghies and catamarans Control lines on larger yachts Materials: U.V. stabilized Acetal sheaves Acetal ball bearings Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks Grade 316 stainless steel load straps and head fittings

Series 20 Ball Bearing Block - Single - Loop Top Features: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Can be fitted with a shackle in either of two planes to allow correct alignment of the block Applications: Dinghy control lines Dinghy Vangs Cunninghams Traveller controls Materials: U.V. Stabilized Acetal sheaves Stainless steel ball bearings Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks =Specifications: Sheave Ø: 20mm(3/4") Max. Rope Ø: 6mm(1/4") M.W.L.: 250kg(550lbs) B. L.: 550kg(1,210lbs) Weight: 16g(0.6oz)

Series 20 Ball Bearing Block - Single - Loop Top Becket Features: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Can be fitted with a shackle in either of two planes to allow correct alignment of the block Applications: Dinghy control lines Dinghy Vangs Cunninghams Traveller controls Materials: U.V. Stabilized Acetal sheaves Stainless steel ball bearings Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks Specifications: Sheave Ø: 20mm(3/4") Max. Rope Ø: 6mm(1/4") M.W.L.: 250kg(550lbs) B. L.: 550kg(1,210lbs) Weight: 18g(0.6oz)

Series 20 Ball Bearing Block - Upright Lead Features: Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Applications: Typically used for halyards at the mast base Materials: U.V. Stabilized Acetal sheaves Stainless steel ball bearings & Load housing Specifications: Sheave Ø: 20mm(3/4") Max. Rope Ø: 6mm(1/4") Fastener Ø: 4mm(5/32") M.W.L.: 250kg(550lbs) B. L.: 550kg(1,210lbs) Weight: 18g(0.6oz)

Series 40 Ball Bearing Block - Single - Universal Head Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Low friction Acetal or Torlon® bearing system Lightweight Cheek cut-outs for easy bearing maintenance Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. Stabilized Acetal sheaves Acetal ball bearings Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 350kg(770lbs) B. L.: 1,000kg(2,200lbs) Weight: 70g(2.5oz)

Series 40 Ball Bearing Block - Single - Stand Up Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Low friction Acetal or Torlon® bearing system Lightweight Cheek cut-outs for easy bearing maintenance Captive Lock™ universal head High static and dynamic load capacity Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. Stabilized Acetal sheaves Acetal ball bearings Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 350kg(770lbs) B. L.: 800kg(1,7600lbs) Weight: 71g(2.5oz)

Series 40 Ball Bearing Block - Single - Loop Top Features: Low friction Acetal or Torlon® bearing system Lightweight Cheek cut-outs for easy bearing maintenance Low friction, 2-stage ball bearing system High static and dynamic load capacity Lightweight Cheek cut-outs for easy bearing maintenance Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range. Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: Acetal ball bearings UV stabilised Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks