Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg)

Mid-Rail Chock/Cleat Stainless Steel Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models.  Specifications: Length 6-1/2" (165 mm) ID 1-7/16" (180 mm) Line Size 1/2" (13 mm) Track 1" x 1/8" (25 mm x 3 mm) Pin. Size 1/4" (6 mm) SWL 2500 lbs. (1140 kg) Weight .9 lb. (.41 kg). 

Folding Cleat - Stainless Steel Studded - 4-1/2" Overall Length: 4-9/16" Cleat Length: 4-1/2" Depth: 1-5/8" Overall Width: 1-3/8"

6" Folding Cleat - Stainless Steel Features: Folding Cleat Made with 316 Stainless Steel Length - 6" For top mount applications where depth under the deck is a concern

SPT2010 Base Wedge for Stainless Steel PowerTower® - 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.  Compatible with: Stainless Steel Aft leaning PowerTower® Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine grade Polymer Dimensions (L x W) - 8.07" x 8.07"  Degree of angle - 4° In the Box: Wedge Wedge base Instruction manual *Sold as an Individual

Deep-Pipe Level Sender - 350mm - Stainless Steel - 90-4 OHM Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.  Features: TE Superseal Connector IP67 Compensation chamber Flange: PA66 GF30 Wiring harness with length of 200 mm 3 Signal ranges: 90–4 OHM, 0– 180 OHM, 240–33 OHM Lengh: 150 mm–1200 mm Mounting diameter: 54 mm IP67 protection rating This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Folding Cleat - Stainless Steel Studded - 6" Overall Length: 6" Cleat Length: 6" Depth: 1-5/8" Overall Width: 1-7/8"

Hand Rail Tee 316 Stainless Steel 90° - 7/8" These Hand Rail Tee fittings create directionality in hand rail applications. Includes set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. *Stainless tubing with a wall thickness of 0.049”.

Quick Cleat - Stainless Steel - 3/8" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.) The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.  Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds. Features: Easy to use Quality engineered and manufactured Technical Specifications: Material - Marine-grade 316 Stainless Steel Working Load -1,188 lb (540 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1" (2.4 cm) Weight - 9.9 oz (280 g) *Sold as an Individual 

Rail Base Fitting Rectangular Base 90° - 316 Stainless Steel - 1-11/16" x 3" - 7/8" O.D. Replacement rail base fitting.   Features: Constructed of corrosion resistant investment cast 316 stainless steel.  Stainless tubing with a wall thickness of 0.049” Installs with four FH fasteners (not included).  ∗Sold as an individual 

V-Jam Cleat - Stainless Steel - 6mm(1/4") Max Line Size A stainless steel jam cleat useful for jamming small diameter, low load lines. Ideal for dinghy halyards and outhauls, flag halyards, etc

RAM Rail Base with Stainless Steel U-Bolt & 1" Ball for Rails from 0.5" to 1" in Diameter The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". U-Bolt Dimensions: Accommodates rails from 0.5" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Neat Cleat Stainless Steel - 6" A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw. Features: Depth: 3-1/8 in. Height: 1-5/8 in. (lowered) Backed by a lifetime warranty against corrosion Size: 6 in. L x 1-1/2 in. W

Rail Base Fitting Rectangular Base 90° 316 Stainless Steel - 1-7/8" x 3-3/16" - 1" OD Replacement rail base fitting.   Features: Constructed of corrosion resistant investment cast 316 stainless steel.  Stainless tubing with a wall thickness of 0.049” Installs with four FH fasteners (not included).  ∗Sold as an individual 

Rail Base Fitting 2-3/4" Round Base 30° 316 Stainless Steel - 1" OD These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included).  *Stainless tubing with a wall thickness of 0.049”