Sealand 341505 MOUNTING BRACKET

SeaLand 307231505 Bulkhead Mounting Bracket SeaLand's 90° Mounting Bracket allows pumps to be installed in tight, spaces or away from standing water. Holes are pre-drilled for SeaLand T-Series and S-Series pumps. Made of heavy gauge stainless steel also includes Pump Noise Isolation Kit.

Universal Quick Release Mounting Bracket Quickly attach or remove any cable or electric-steer motors MotorGuide's rugged Universal Quick Release Mounting Bracket allows you to quickly attach or remove the trolling motor from your boat. The cam lock design is easy to operate and provides a snug and secure fit. This mounting bracket works with all MotorGuide cable and electric steer motors and allows you to switch from one motor type to another as your fishing style changes. Features: Easily remove motor for storage and security Design allows motor to slide inboard up to 5-3/4" clearance when launching a boat Corrosion resistant anodized aluminum construction with stainless steel hardware Additional top plate (sold separately) to easily switch between multiple motors Designated area for padlock (sold separately) to protect motor from theft WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

5" Set Back Transom Mount Bracket - Clear - Anodized Panther KPS50A Transom Mount Brackets comes a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water. Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

5" Set Back Transom Mount Bracket - Black - Powder Coat Panther KPS50B Transom Mount Brackets comes as a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water. Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

SCM-SL Series Flush Mount Spreader Light - White Housing - White The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing- Full-Color The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Tilt & Swivel Lockable LED TV Wall Mount Bracket The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket is a unique bracket with a simple but very versatile design. The team at Majestic worked very closely with various Marine and RV manufacturers and customers to engineer a bracket that can be a simple wall bracket and yet give you the flexibility of some angular movement. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket does just that is easy to install, and has a lot of flexibility. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket comes in Black and will fit all Majestic LED TV models 22" or less. It is designed for easy mounting and removal. Simply remove the securing locking screw and slide up to remove or slide down to install. This bracket is designed for both 75mm and 100mm Vesa mounting solutions. The Tilt and Swivel allow for the TV to be installed almost anywhere and with the wide viewing angles, you will always see the perfect picture. Features Distance to wall: 44mm Loading weight: 15kgs Max TV size range: 15-22" Adjustable angle: 15 degrees up/down & left/right

HD Wheels Chocks 2-Pack with Mounting Bracket CURT HD wheel chocks are the perfect accessory for saving space and staying safe. These unique wheel chocks mount to the trailer frame and prevent the need to store them inside a truck or RV. The unique bracket mounts to the trailer frame and includes snap-rings that quickly store wheel chocks out of the way and outside of a vehicle. No more dirty wheel chocks inside the truck or SUV! These HD wheel chocks are made from heavy-duty materials and prevent trailer or vehicle movement. The dense rubber construction provides improved traction to prevent chock slippage or movement, and the high-density steel brackets avoid bending or breaking with use. Finished with a weather-resistant liquid A-coat that prevents rusting and corrosion and a bold orange powder coat for durability. The kit includes self-tapping screws for mounting the included bracket to the trailer frame and prevents the need for pre-drilling holes for ease of installation. The snap-ring clips stow away the wheel chocks and prevent the loss of pieces when not in use. Quickly and easily install the bracket, and go and store the wheel chocks on a trailer without losing pieces or getting dirty. Features: HD Wheel Chocks 2-Pack with Mounting Bracket Quickly mount the wheel chocks to a trailer frame for easy storage Convenient storage prevents dirt from entering the truck or RV Snap-ring clips with a wire lanyard to store chocks and prevent lost pieces Large handles in wheel chocks provide easy carrying and use The ridged bottom surface prevents chock slippage and movement Heavy-duty rubber and steel construction provides long-lasting durability Self-tapping screws and trailer frame mounting brackets included Notes: Includes wheel chocks (2), brackets (1), snap-ring clips (2), and mounting hardware Specifications: Finish: Blank Hub Warehouse: D25 Installation Time (Exact): 0 Material: Recycled rubber Product Weight: 8.590 lbs. Warranty: One-Year Limited Warranty

2.5" Set Back Transom Mount Bracket - Black - Powder Coat All anchor brackets are equipped with proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket while in motion. Leave unlocked while anchored. Designed for quick and simple installation. Features: Black Powder Coat finish Leave unlocked while anchored Sturdy, durable marine-grade material Designed for quick and simple installation

SnapIt! Marine BRK Pontoon Boat Universal Mounting Bracket Universal Mounting Bracket. The use of additional mounting brackets allows the option of utilizing the removable accessories at different locations on the boat. Color: White.

Signature Series 3 Wake Tower Mounting Bracket - Fixed Mount Versatile mounting solution for Signature Series wake tower speakers. Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design  Technical Specifications: Fixed (non-swivel) Fits wake tower bars of different diameters – from 1.31” (33.4 mm) to 2.5” (63.5 mm) Dimensions (W x H x D) - 6.85" x 3.70" x 2.05" (174 x 94 x 52 mm)  In the Box: Two (2) Fixed-mount wake tower brackets Various plastic inserts for different wake tower bar diameters Mounting hardware  Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.