|
Simer 2810E-02 Shallow Well Jet Pump, 3/4HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230 Volt Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, Best for Shallow Wells to 20 Feet, Maximum Lift 25 Feet, up to 14.4GPM, Adjustable Pressure Switch Set to 30psi On / 50psi Off
|
566.25 |
|
|
SIMER 171P5620 CAPACITOR
For Simer Shallow Well Jet Pump Models 2800, 2800E, 2802, 2802E, 2803 use capacitor 171P5620.
This is a 30uf Capacitor.
Simer, Flotec and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number.
|
19.55 |
|
|
Sta-Rite PND-10 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
863.28 |
|
|
Sta-Rite PWP-01 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, No Pressure Switch, up to 25 Foot Water Depth
|
732.24 |
|
|
Simer 2802E Shallow Well Jet Pump & Tank, 3/4HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 3/4HP TEFC Motor 115Volt only, 1” NPT Ports, up to 7.8GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth, , with 15-Gallon Equivalent Horizontal Precharged Tank
|
639.75 |
|
|
Simer 2805E-02 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP 115/230Volt Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, Best for Shallow Wells to 20 Feet, Maximum Lift 25 Feet, up to 8.5GPM, Adjustable Pressure Switch Set to 30psi On / 50psi
|
465.00 |
|
|
Simer 2800 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP TEFC Motor 115Volt only, 1” NPT Ports, up to 5.1GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
381.42 |
|
|
Simer 2800E Shallow Well Jet Pump & Tank, 1/2HP
Simer Shallow Well Jet Pump & Tank, Cast Iron Construction, 1/2HP TEFC Motor 115Volt only, 1” NPT Ports, up to 5.1GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth, Assembled to 15-Gallon Equivalent Horizontal Precharged Tank
|
539.25 |
|
|
Simer 3105P Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
432.90 |
|
|
Flotec FP4822 Stainless Steel Shallow Well Jet Pump 3/4 HP
Stainless steel shallow well jet pumps are heavy-duty, durable, corrosion resistant, high pressure and offer efficient non-stop operation for years.
KEY FEATURES
Superior performance at depths to water of 25' or less
Heavy-duty, stainless steel pump housing for highest corrosion resistance
Ready-to-install 230 volt motor - see manual for 115 volt conversion
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Stainless Steel
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 11 GPM
FLOW at 10' LIFT and 40 PSI: 11 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 52 psi
MAXIMUM INLET PRESSURE:
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: NPT
AMP DRAW (full load): 7.4 amps on 230v / 14.8 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp on 230v / 20 amp on 115v
MAXIMUM WATER TEMPERATURE: 122°F (50 °C)
|
734.40 |
|
|
Flotec FP4022-10 Thermoplastic Shallow Well Jet Pump 3/4 HP
This new revision of an "old hand" provides good pressure pumping from wells where the depth-to-water is 25' or less.
KEY FEATURES
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 12 GPM
FLOW at 10' LIFT and 40 PSI: 9.7 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 78 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 6.1 amps on 230v / 12.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp on 230v / 20 amp on 115v
MAXIMUM WATER TEMPERATURE: 140 °F (60 °C)
|
511.50 |
|
|
Simer 3305P Convertible Jet Pump, 1/2HP
Simer Convertible Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115V only, 1-1/4”NPT Suction x 1”NPT Discharge Ports, for Shallow Wells to 25 Feet or Deep Wells to 70 Feet, from 5.3GPM to 9.0GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, Built-in Pressure Regulator, Requires Jet Kit
|
516.00 |
|
|
Simer 3310P Convertible Jet Pump, 1HP
Simer Convertible Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1HP 115/230V Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, for Shallow Wells to 25 Feet or Deep Wells to 90 Feet, from 5.3GPM to 20.7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, Built-in Pressure Regulator, Requires Jet Kit
|
698.25 |
|
|
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.
Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
|
122.85 |
|
|
Goulds J5S 1/2Hp Shallow Well Jet Pump
Goulds Jet Pump Shallow Well Only Cast Iron J+ Series, 1 1/4” x 1”FNPT Ports, 1/2HP 115V, Carbon/Ceramic/Buna Seal
|
798.76 |
|