|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Williamson Lures
Born on the rugged south coast of Africa, Williamson makes lures for those who thrive on the challenge of finding and conquering the world's largest fish. Hard-won knowledge and a sincere passion for offshore angling assure that there's a Williamson lure to fill every spot in any saltwater spread. When it's all on the line make sure Williamson is on yours.
VMC Terminal Tackles
With over two centuries of experience, the innovative craftsmanship of VMC design show in every product. Award-winning hooks for every style of fishing, many with first-to-market features, plus rigs, jigs and terminal tackle second to none. Weights and leaders that allow you to rig and fish with a variety of techniques. Innovative designs and environmentally conscious materials give you the edge.
Sufix Invisiline™ Leaders
Serious fishermen know that, with every cast, there's a lot on the line. Sufix is engineered to be stronger and tougher. Uncompromising. Like the anglers who depend on it. With Sufix there's nothing you can't catch. Always use the best line. Fishing leaders lines are a vital connection between your gear and your fish. With our Sufix fishing leader lines, you can be sure you’re using the best line. These leader lines are incredibly tough and abrasion resistant for unmatched performance.
Specials Closeouts Remanufactured Rebates
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - Black
Trident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.
Features:
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) 0.960 / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2
|
160.07 |
|
|
5/8” A2 Fuel & Vent Line Hose - Black - Sold by the Foot
Trident 5/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends).
Features:
Sold by the foot
This hose is built with the best fuel, fire, and age-resistant formulation
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also, provides excellent bend-ability
Application:
Marine Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: Sold by the Foot
Specifications:
Inner Diameter: (inch) 0.625" / (mm) 15.9
Outer Diameter: (inch) 0.960" / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (Lb./100ft.) 25.84 / (Kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted & CE certified.
|
5.22 |
|
|
5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the Foot
Trident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.
Features:
Sold by the foot
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Applications:
Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) 0.960 / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2
|
5.62 |
|
|
MS-BB100 Marine Black Box AM/FM/BT - 2 Zone
Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes. An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments. Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.
With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver. Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel.
NMEA 2000 Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones
Fusion-Link™ makes control of your stereo easier than ever. Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch. With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.
Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone.
Features:
Small footprint Black Box design with included Bluetooth embedded wired remote
IPx7 water resistant wired remote with quick Bluetooth pairing
Flush or flat mounting remote control installation options
Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display
Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming
True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment
Technical Specifications:
2 Zones
200 Watts peak power
NMEA 2000 compatible
Class AB Amplifier
Rear USB connection
Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"
Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"
In the Box:
Media Black Box
Remote - Wired
Remote Mounting Hardware/Gasket
Remote Mounting Template
6' NMEA 2000 Drop Cable
Power Wiring Harness
Aux/Line-out Harness
Documentation
*SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
371.99 |
|
|
ENGINE PARTS
From Sierra, Arco Marine, and CDI Electronics.
We can no longer ship engine parts internationally or, to California due to Prop 65.
|
|
|
|
|
|
Arco Marine
Proven dependability makes ARCO the trusted source for OEM quality or better alternators, inboard starters, outboard starters, and tilt/trim motors. Nearly 60 years ago, ARCO set the gold standard for marine engine parts. They test and retest every unit manufactured beyond normal operating conditions. That's how ARCO knows they deliver the highest quality, most reliable parts available.
Any returns for a defective product will take 90+ days. As it has to be sent back to the manufacturer. for varification.
|
|
|
In regions that aren’t fortunate enough to have good weather for boating all year round, Memorial Day signals the start of the sailing season. Be ready. Tune up, pump up, and polish!
Check your safety equipment, lines, hoses, and sails. Get ready to launch.
Here are a few handy tips to make your boating season run smoothly.
Paperwork
Get your boating paperwork updated and in order. Permits, registration, decals, certificates, and licenses must be up to date. The Coast Guard, Marine Police, and the Conservation authorities may stop you and board your vessel to check for up-to-date permits and equipment.
It is an excellent time to review your boater’s insurance policy. Check to see if your situation has changed and if you need additional coverage. Then, submit your paperwork as early as possible to avoid fines.
Onboard Systems
Replace the oil filter and lubricate all parts; lower-case should be free of oil leaks
Electrical systems such as fuses, spark plugs, and wires should be checked and adequately replaced
Empty your fuel tank and refill it with fresh fuel and fuel treatments
Flush the water tank
Fully recharge your battery and fill the cells with distilled water
All lines should be checked
Inspect the propeller for damage or fishing line
Check that hull is free of blisters and cracks
The engine anode must be inspected every three months or less.
Replace boat anodes once a year.
Check your outboard anode yearly.
Check your prop shaft anode monthly.
Check the hydraulic steering system for proper fluid levels, leaks, and tilt
Inspect the steering, shift, and throttle cable
Check and change all of the fluid levels as appropriate, including engine oil, power steering, and coolant
Communication
Clean all screens on GPS, VHF radio, chart plotters, and fish finders.
Replace any batteries with fresh new ones.
Check wires and fuses.
Check and repair antenna mounts, speakers, and mics.
Test communication equipment while tied to the dock.
Having a variety of communication options, according to CLR Marine VHF radios, cellular amplifiers, loud hailers, hailer horns, and mobile broadband options - helps you stay connected in a number of ways. “Having different options to reach out to people can bring peace of mind in a serious situation, and can also just help you have more fun while you are out enjoying the waterways."
Trailer
If trailering your boat, pay special attention to wheel bearings, tires, and brake lights.
Dock Lines
Check all dock lines for chafing and fraying. Better to replace than repair.
Safety Equipment
Flares, throw cushions, life jackets. The intense sun can do a number on cushions and life jackets, and flares and fire extinguishers must be current before expiration. The Coast Guard, marine police, and conservation law enforcement take out-of-date safety equipment very seriously, and they enforce heavy fines if you are non-compliant.
Don’t forget the Docks
Check all dock lights and electrical fittings for loose wires. Docks should have an emergency shut-off switch for electricity on the docks.
You will have a fun-filled boating experience if all of your equipment is clean and well maintained.
Fair Winds, Smooth Sailing
----------------------------------------------------------------------------------------------------------
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. In addition, she has served as a past-Commodore of Great Lakes Fleet 21 - Chicago region.
©Copyright Cheryl Kuba, 3happycampers.com, 2022.
|
|
|
Our major distributor has started posting expected delivery dates for the items we sell. We hope to have that available to our customers very soon.
We have also added a few new product lines, Otter Products, RepairTech, Sierra and VEI Oceanview.
We have dropped Quicksilver parts due to a 12% increase in our cost. To take carry of that lack of powerboat parts we have added the Sierra line which is a direct replacement for Quicksilver. We will be adding the complete Sierra Catalog in PDF version to our site soon.
We have slowly been updating the Universal Engine Parts, with photos and descriptions when available.
Remember if you don't see what you are looking for ask us, we can probably get it for you.
|
|
|
Outboard Fuel Line Issues
We could not start our outboard engine. WHAT'S WRONG??
Our outboard engine usually always starts on the first pull and it is not flooded.
Trying to pump fuel through the squeeze bulb was a waste of time as fuel would not fill the bulb. Take the line off the engine and put a screw driver in the end and sometimes it would pump fuel and sometimes it would not. So you have to figure it is an issue with the hose or the bulb. All fittings were factory tight and when the hose was submerged in water no air bubbles when squeezing the bulb. Let's just replace the hose. We got lucky and got the dinghy started. Off to the local chandlery we go, it was about a mile walk from the dock. We were towed back to the boat because again we could not get the outboard started.
This is our second fuel hose on a two year old engine. Anyway I removed the fittings without a lot of work and reinstalled them on the new hose with new clamps. The outboard is now starting on the first pull again.
About three weeks have gone by, we are now having starting issues again. Now what? I pull the spark plugs out and the engine is not flooded. That leaves a fuel issue again. I start playing with the fuel line again, it can not be this, I'm saying to myself. I pull off the engine side of the fuel line from the bulb and nothing seems wrong. Put that back together and take the tank end of the hose off the bulb. There's an issue, I can't blow through it.
So I pull off the tank fitting, there it is, about a ½” in you can see something blocking the hose. So I cut off about 3 inches of that end, I still could not blow through it. Cut off another 3 inches and found that same looking blockage twisted up in the hose. What is this junk, this $50.00 fuel hose is garbage. This time I have a new idea, can I pull this blockage out? I was able to get hold of enough of that stuff to pull it all out of the hose. It's a plastic liner and was twisted in several spots. I ran some fuel through the hose without the liner, now to get rid of the glue that was used to keep the liner in place and then the engine ran fine.
Hose three, that's what I said hose number three. This has to be a fluke so I bought another new hose and will change it out the next time I have an issue. Well later is here and guess what. The outer hose on this new replacement has shrunk some and the thin plastic liner is sticking out both ends of the new hose. That hose was almost $65.00 as we were again in another country.
I have since replaced the Outboard Fuel Hose with Automotive Fuel Hose and put a plastic wire loom over it to protect it from the UV rays. I'm just hoping the squeeze bulb I reused does not have a liner in it. So far so Good two months later, our outboard starts on the first pull.
Closeouts Rebates Remanufactured Specials
|
|
|
Ocean Equipment - Bringing Innovation to Market NavPod - Waterproof Housing for Marine Electronics
NavPod is committed to producing high-quality Waterproof Housings for Marine Electronics. NavPod stands behind its commitment by offering a 10-year warranty on all new Gen3 NavPods. NavPod wants you to be a customer for life and is willing to earn your trust and loyalty.
For Sail and Power - NavPods are tough and rugged yet clean and attractive! NavPods protect vital Marine Electronics from the harshest of offshore boating conditions. Pre-Cut models are available for Raymarine, Garmin, Simrad, Lowrance, Furuno, Humminbird, B&G, and more!
HoseCoil Washdown Systems
The HoseCoil product line includes a range of specialty hoses, washdown nozzles, and a unique line of thermoformed enclosures. HoseCoil hoses and nozzles are designed to withstand the harsh elements boaters require and are used in many other applications including homes, pools, spas, and RVs. Coiled and Expandable hoses are available with convenient storage bags and mounting systems.
Specials Closeouts Remanufactured Rebates
|
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|