Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.

Shurflo 4238-141-E07 Blaster Ii 3.5 24V Diaphragm Pump 4 Chamber, Blaster II, 24VDC Intermittent Duty Sealed Motor, Up To 3.6GPM Open Flow, 45PSI Adjustable Demand Switch, 1/2" x 14 NPSM Male Threaded Ports, Includes Two 3/4" Hose Barb Straight Swivel Fittings a Male Garden Hose Fitting and a Pistol Grip Sprayer, 3.5 Amps, Ignition Protected, CE Rated, Fresh or Salt Water Washdown Pump

1-1/2" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - White Trident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service. Features: A hard PVC helix gives good flexibility and bend radius No cuffs are required Application: Specially compounded to provide resistance to odor permeation and (FDA) potable water fill Also for critical bilge, drain scupper, live well, etc Specifications: Tube & Cover: Hard PVC helix Color: White Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 1.788" / (mm) 45.4 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 22 / (Kg/m) 0.76  Bend Radius: (inch) 4" / (mm) 102 *Don't use with alcohol, anti-freeze, petrochemicals, or solvents *Burst Pressure is 4 x Working Pressure

Sternflex 2" rigging hose used to cover harness and bracket mounted hoses on outboard engines. Polyethylene co-polymer wall with an integral polyethylene helix. Resistant to abrasion, crushing and UV. 3" bend radius.

4 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.

1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max. Features:  Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38 Outer Diameter: (inch) 1.97 / (mm) .05 Working Pressure: (Psi) 60 / (bar) 4.1 Bend Radius: (inch) 4.0" / (mm) 102 Weight: (Lb./50ft.) 45 / (Kg/m) .518 *Burst Pressure is 4 x Working Pressure

1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green Stripe Trident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose.  Features: Resistance to Odor Permeation and winterizing with antifreeze  With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention This makes for easy installations with no heatgun or lubricant necessary 10 Year Warranty Application: Premium Sanitation Hose for all head & holding tank connections NOT for potable water Construction: Tube & Cover: EDPM/SBR Rubber Color: White with Green Stripe Reinforcement: Polyester reinforcement + spring steel wire helix Temperature Range: -20F-220°F (-29°C-104°C) Length: 50’ (15m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 2 / (mm) 50.8 Working Pressure: (Psi) 60 / (bar) 4.1 Weight: (Lb./50ft.) 44 / (Kg/m) 19.9 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure

3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

3 Blade stainless propeller for 60 -140 horsepower engines with 13 tooth spline and thru hub exhaust. 4-1/4" Gear Case.