Foam Ring Buoy - 20" - Orange w/White Grab Line Inspected, tested and approved in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape. Minimum Buoyancy 16.5lbs SOLAS - "Saving of Lives at Sea" SOLAS approved ring suitable for quick release from the bridge. SOLAS approved Coast Guard approved

Foam Ring Buoy - 24" - Orange w/White Grab Line Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape. Minimum Buoyancy 16.5lbs SOLAS - "Saving of Lives at Sea" SOLAS approved ring suitable for quick release from the bridge. SOLAS approved

Foam Ring Buoy - 30" - Orange w/Grab Line Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape. Minimum Buoyancy 16.5lbs SOLAS - "Saving of Lives at Sea" SOLAS approved ring suitable for quick release from the bridge. SOLAS approved

Foam Ring Buoy - 20" - White w/White Grab Line Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape. Minimum Buoyancy 16.5lbs SOLAS - "Saving of Lives at Sea" SOLAS approved ring suitable for quick release from the bridge. SOLAS approved

Foam Ring Buoy - 24" - White w/White Grab Line Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape. Minimum Buoyancy 16.5lbs SOLAS - "Saving of Lives at Sea" SOLAS approved ring suitable for quick release from the bridge. SOLAS approved

White 30" Foam Ring Buoy w/White Grab Line Inspected and tested in accordance with U.S. Coast Guard regulations.  All rings contain unicellular polyurethane foam for buoyancy.  Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line.   SOLAS approved models equipped with reflective tape. Minimum Buoyancy 32 lbs Features: Vinyl skin life rings can be painted or numbered with excellent adhesion For both recreational and commercial use Most durable life ring on the market Vinyl skin is more puncture resistance and less likely to tear or scuff All life rings meet USCG approval for both commercial and recreational use

Decorative Ring Buoy - 20" - White/Blue - Not USCG Approved Spruce up your pool or spa area Rings are constructed from waterproof nonabsorbent closed-cell foam Comes equipped with sewn-in polypropylene grab lines and decorative blue bands

Decorative Ring Buoy - 25" - White/Blue - Not USCG Approved Spruce up your pool or spa area Rings are constructed from waterproof nonabsorbent closed-cell foam Comes equipped with sewn-in polypropylene grab lines and decorative blue bands

A-4 Buoy 20.5" Diameter - White The A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions.  Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there.  Put your trust in Polyform's most versatile and well-known product. Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 20.5" x 27" (52.1 x 68.6cm) Eye Diameter - 1.125" (2.9cm) Circumference - 64.4" (163.6cm) Volume - 22.5 gallons (85.2L) Boat Size - 50 - 60' (15.2 - 18.3M) *Sold as an Individual

Ring Buoy - 24" Features: Orange buoy with reflective tape For use on board commercial vessels, offshore, and yachts USCG approved Molded from high impact linear low density polyethylene for extreme conditions and environments Replaceable encircling rope 24" Ring Buoy Features: Minimum 16.5 lbs. of buoyancy U.S. Coast Guard Approved Type IV  *NOTE: A vessel of more than 7.9 meters (26 feet) in length, but not more than 19.8 meters (65 feet), must carry a minimum of one ring buoy of not less than 610 millimeters (24 inches) in diameter. A vessel of more than 19.8 meters (65 feet) in length must carry a minimum of three ring buoys of not less than 610 millimeters diameter (24 inches) in diameter [46 CFR Guidelines: Ch. 1, Subpart C] WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

17" CM Mooring Buoy with SS Iron - White Blue Stripe The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.  With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).  The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.  Features: Large eye (4-3/8") and swivel (1-1/2") provide maximum strength Soft vinyl surface won't harm boat finishes Polyform's unique vinyl valve seals securely Even wall thickness for strength and durability One (1) piece design Technical Specifications: Mooring Iron - Stainless Steel Size - 17" x 22" (43.2 x 55.9cm) Tube Diameter - .625" (1.6cm) Circumference -  53.4" (138.7cm) Volume - 11.8 gallons (44.7L) *Sold as an Individual

Life Ring/Ring Buoy Letter Kit Now you can customize your life ring with our Taylor Made Lettering kit. Package includes 2" black letters and numbers (4 ea.) plus symbols. Constructed from waterproff marine grade 4 mil. vinyl, resistant to fuel, chemicals fading and scratching. Application template included.

BoatGuard® Mooring Whip - 14' For boats up to 10,000lbs Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.  Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.

BoatGuard® Mooring Whip - 12' For boats up to 5,000lbs Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.  Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.

AnchorShade® III - White Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come! This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach. Features: Adjustable pole locks in place up to 8 feet Lightweight, mildew/fade resistant UV-treated nylon top Excellent sun protection. Blocks out 85-90% of harmful rays Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications "Market Style" top allows venting to occur without loss of sun protection Comes complete with its own heavy duty carrying case with shoulder strap