Bilge Pump - 600 GPH - Automatic  The TRAC 69310 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps.  Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Non-Automatic The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 800/1100 GPH - Automatic  The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 800/1100 GPH - Non-Automatic The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Heavy Duty Bilge Pump 4000 GPH - 24V Features: Limited 1 Year Warranty  Capacities of 1600, 2200, or 4000 GPH Liquid-cooled, 12-pole motor with double ball bearings for extended service life The shaft of stainless steel (SS2343) The impeller is carefully designed and tested to maximize head and flow 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, and unique threaded port design Universal base plate and choice of two different ports makes for a simple installation Removable check valve included Heavy Duty Submersible Pumps can be combined with either an electronic float switch or the Ultima Switch for automatic operation Specifications: Capacity 1.0M head (13.6V/27.2V): 164 l/min - 2600 GPH Capacity straight (13.6V/27.2V): 252: l/min -4000 GPH 24V 7.5A Fuse Size: 15A Connection 1.5" and 2"

Automatic Bilge Pump 500 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 32 L/min (500 GPH) and 25 L/min (400 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats up to 6m (20 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 1,8A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Automatic Bilge Pump 750 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 2,7A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Automatic Bilge Pump 750 GPH - 24V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 2,7A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Automatic Bilge Pump 1100 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Straight Discharge Port: Fixed 29 mm (1,15″) Fuse: 4A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Automatic Bilge Pump 1100 GPH - 24V Fully automatic bilge pump 24V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  straight Discharge Port: Fixed 29 mm (1,15″) Fuse: 2,5A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Heavy Duty Bilge Pump 2200 GPH - 24V Features: 2200 GPH Liquid cooled, 12-pole motor with double ball bearings for extended service life Shaft of stainless steel (SS2343) 2200 GPH motor is sealed off by a mechanical seal design Impeller is carefully designed and tested to maximize head and flow Universal base plate and choice of two different ports makes for a simple installation Removable check valve included Heavy Duty Submersible Pumps can be combined with either an electronic float switch or the Ultima™ Switch for automatic operation Specifications: Max Ø: 108mm / 4.25" Max Height: 177mm / 7" Weight: 2.25 kg / 4.96 lbs

Sahara MK2 S500 Bilge Pump 500 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sahara MK2 S800 Bilge Pump 800 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.