|
VPNB4 MANL 4 Position All-In-One Distribution Block with Cover
T-Spec designed VPNB4 distribution block to handle the high-current power and ground distribution for four (4) power sources, and protect them each with a mini-ANL fuse. This hefty little block distributes power from one (1) 1/0-gauge positive power cable to four (4) 4 to 8 gauge power leads, each routed through a mini-ANL fuse.
Then, the same block receives the amps' two ground wires and combines them for a single 1/0 to 4 gauge ground cable.
Fuses sold separately.
Features:
(2 positive) 1/0 to 4 AWG in to (4 positives) 4/8 AWG out
(1 negative) 1/0 to 4 AWG in to (4 negatives) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Distribution block for both power and ground
Plastic cover (attached)
3 Rubber grommets and sleeves on power inputs (installed)
2 Rubber grommets and sleeves on power outputs (installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.12 |
|
|
VPNB2 MANL 2 Position All-In-One Distribution Block with Cover
T-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse. This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse.
Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.
Fuses sold separately.
Features:
(2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out
(1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Distribution block for both power and ground
Plastic cover (attached)
2 Rubber grommets and sleeves on power inputs (installed)
2 Rubber grommets and sleeves on power outputs (installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.53 |
|
|
VFDB4 MANL 4 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.75 |
|
|
VDB2 2-Position Distribution Block with Cover
T-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of two (2) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.
Features:
One (1) 1/0 to 4 AWG into two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate lock technology
In the Box:
Distribution block with one (1) 1/0 set-screw input and two (2) 4 or 8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed on input and outputs)
Two 1/2" screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.84 |
|
|
VFDB2 MANL 2 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.03 |
|
|
ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus
Part# 5035
Can be used for 24-hour circuits
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5025 ST Blade Fuse Block with Cover - 6 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.28 |
|
|
5026 ST Blade Fuse Block with Cover - 12 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.78 |
|
|
5028
ST Blade Fuse Block w/ Cover
6 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5029
ST Blade Fuse Block w/ Cover - 12 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.26 |
|
|
Raymarine Axiom Pro Now In Stock
Axiom Pro is engineered for captains that want it all. Available with RealVision 3D, 1kW CHIRP sonar, and Raymarine HybridTouch control, Axiom Pro is the new standard for “all-in-one” display. And with a blazing fast quad core processor, a super bright IPS display, and the smart LightHouse OS, Axiom Pro delivers a fluid and intuitive navigation experience. Axiom Pro is easy to expand into an advanced navigation network that includes multiple Axiom displays, CHIRP radar, Evolution autopilot, FLIR thermal night vision technology, and more.
Specials Closeouts Remanufactured Rebates
|
|
|
2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw Terminal
Features:
Combines negative and positive buses on one block
Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation require
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.40 |
|
|
5005 ANL 35-300AMP Fuse Block with Cover
Features:
Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction
For use on systems up to 32V DC
Large 5/16" - 18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.32 |
|
|
5503
Cover included
Accepts 5/16" (M8) ring terminals
For use on systems up to 32 Volts DC
Swing out design allows replacement of the fuse without removing fasteners
Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
UL 94-V0 base resists high heat
Insert molded studs ensure secure fuse mounting
Insulating cover satisfies ABYC/USCG requirements
Cover breakouts allow wire access in any direction
Fuse sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.47 |
|
|
Groco Ibv-750 3/4 Bronze Ball Valve
|
34.22 |
|