|
Tuthill 000LEV-C-7 Pump 0.5Gpm 3/8 Ports
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI with adjustment between 55-120 PSI
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT
Product Specs :
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
702.50 |
|
|
Tuthill 0LE-C-7 Pump 1.8Gpm 1/2 Ports
Cast Iron Rotary Gear Pump
Pump End Only, NO motor
L Series
Cast Iron Construction
Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.8 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
596.25 |
|
|
Tuthill 00LE-C-7 Pump 1Gpm 1 1/2" Ports
Pump Body: Cast Iron
Shaft Seal: Mechanical Seal Viton
Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
702.50 |
|
|
Tuthill 2LEVK-C-7 Pump 6.2Gpm with Reverse & Outer Bearing
|
788.46 |
|
|
Tuthill 00LEV-CC-7 Pump 1Gpm 1/2Ports
Cast Iron Rotary Gear Pump
Pump End Only, NO motor
Cast Iron Construction
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Counter Clockwise rotation only (from shaft end view)
Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
597.13 |
|
|
Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM
C Series Pump
Cast Iron Construction
NO motor
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
830.28 |
|
|
Tuthill 2C2B-C-7 Mechanically Sealed Pump
Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
|
846.60 |
|
|
Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg
Cast Iron Rotary Gear Pump
Pump End Only, 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction NO motor
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
671.50 |
|
|
Tuthill 2LEV-C-7 Pump
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
792.00 |
|
|
Tuthill 1LEV-C-7 Pump 3.2 Gpm
Cast Iron Rotary Gear Pump
Pump End Only
Tuthill L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field).
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
726.00 |
|
|
Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump. Pump End Only.
L Series Pump
Cast Iron Construction
Clockwise rotation only (from shaft end view).
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
728.88 |
|
|
Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports
Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1133.22 |
|
|
Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With
Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1319.88 |
|