Navigation Kit for Sail, Wind Sensor, Transducer, Display & Cables Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.  Safety, performance, entertainment.  VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.  All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified. Navigation Kit Plus includes: 1x OceanLink 4.3 TFT Display/Gateway - Black 1x NMEA 2000 Wind Sensor 1x  NMEA 2000 Triducer Airmar Sensor (Speed/Depth/Water Temp) 1x 30m NMEA 2000 backbone (mast) cable 1x 6m NMEA 2000 drop cable 1x NMEA 2000 terminator (female) 1x NMEA 2000 terminator (inline) 2x NMEA 2000 T-splitter WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WS310 Wired Wind Sensor with 35M Cable with Interface Cable The WS310 wind sensor pack is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor. High Performance Designed to provide highly accurate wind data in all conditions at all points of sail and heel. Reliability Thousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times. Comes with: WS310 Wind Sensor - 000-14391-001 WS310 (wired) Interface - 000-14389-001  WS300 35M (115') CABLE - 000-14397-001

Mast Cable f/ Analog Wind Sensor - 30M (98.4") Mast Cable (Analog Wind Sensor) - 30M (98.4') Features: Cable length - 30M (98.4') *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Sealing Kit for Water Capacitive Sensor Sealing Kit for Fresh Water Level Sensor. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Sealing Kit for Water Level Sensors Replacement kit for water sensors. In the Box: Gaskets x 2 Allen bolts Allen key *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Navigation Kit Plus for Sailboats Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.  Safety, performance, entertainment.  VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.  All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified. NAVSENSOR (INCLUDED ONLY IN THE KIT NAVIGATION PLUS) The multifunctional AcquaLink™ NavSensor offers an inertial sensor with a GNSS receiver module to provide the accurate readings of speed of travel as well as pitch & roll. Compass readings can be displayed electronically thanks to the embedded Fluxgate compass, which also facilitate course corrections in electronic autopilots. The barometer and air temperature sensors are early indicators of forthcoming weather conditions. Navigation Kit Plus includes: 1x OceanLink 4.3 TFT Display/Gateway - Black 1x NMEA 2000 Wind Sensor 1x Nav Sensor 1x  Triducer Airmar Sensor (Speed/Depth/Water Temp) 1x 30m NMEA 2000 backbone (mast) cable 3x 6m NMEA 2000 drop cable 1x NMEA 2000 terminator (female) 1x NMEA 2000 terminator (inline) 3x NMEA 2000 T-splitter WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Vertical Mast Wind Sensor with Top Bracket for AquaLink® & OceanLink® Gauges Includes: Top Bracket for AquaLink® & OceanLink® Gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Vertical Mast Wind Sensor with Front Bracket for AcquaLink® & OceanLink® Gauges Includes: Front Bracket for AcquaLink® & OceanLink® Gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

608 Wind Sensor Without Cable Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets.

Wireless Interface for WS320 Wind Sensor WS320 Wireless Interface for use with WS320 Wind Sensor allows connection to your NMEA 2000® network. Features: Bluetooth 4.0 communication Range suitable for mast heights of up to 25m/80’

iSeaSense Wireless Speed Depth Temp Pack Plus Wind Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor. Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity.  Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays. Operation: You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required. By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network. With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs. Key Features: Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data.  Data can be shared with other devices on the NMEA 2000 network too. iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device. iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone.  It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor. iSeaSense also includes depth, speed, and temperature sensors.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel. A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included. With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display. iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready. You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations. The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates. The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc. iSeaSense Pack Features: Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor Pack also includes WND100 mast head wind sensor – adding wind data to the system and network Easy to install mast head unit with 20m cable and NMEA 2000 interface iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location Calibrate the wind sensor via the iSeaSense interface Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays Interface Features: NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server. Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass Network diagnostics, settings, and calibration capability Data logging Self-powered from NMEA 2000 backbone Integrated wifi antenna typically footprints boats up to 20m Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus) Transducer Features: Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders Max depth 100m Supports up to 22-degree hull deadrise Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone Standard 2” thru hull size/diameter Includes Bluetooth interface for advanced calibration and set-up features if required Stainless steel and bronze skin fittings available as an option Wind Sensor Features: The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode 8-18V power with ultra-low 25mA power consumption Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened) iKonvert NMEA 2000 interface included for system integration Wind angle accuracy is better than 4 degrees Wind speed accuracy better than 3% Min wind speed 1.7 knots – max 80 knots Settling time typically 1.3 seconds

Sail Performance Sensor Pack (WS320, ZG100, DST810, N2K) An all-in-one core data components kit, that includes all you need for your boat network. This pack includes a WS320 wireless wind pack for highly accurate wind information, which is easy to install. The IDST810 depth, speed, and temperature sensor and a GPS ZG100 Module pack for all your positioning data, including heading, heel, and trim. This pack also includes the Micro-C backbone kit, and 2M, and 5M N2K cables for all your wiring and installation requirements. WS320 wireless wind sensor (000-14383-001) The perfect solution for any sailor looking to get accurate and fast wind data to their instruments, which is easy to install without a cable through the mast. Designed to provide highly accurate wind data in all conditions at all points of sail and heel. WS320 has been benchmarked against multiple different sensors in over 500 individual wind tunnel tests. Easy to install and lightweight, ideal for smaller boats – without compromising performance for wireless convenience. WS320 has the same accuracy (both wind angle and wind speed) as the wired version while outputting wind at a super smooth 5 times every second. As the most exposed sensor on a yacht, the wind sensor – critical for instruments and autopilot steering – must meet an exceptionally high standard. In addition to B & G’s extreme testing program, the WS320 sensors have been subject to combined field tests of over 200,000 hours. DST810 MultiSensor (000-15735-001) A compact multisensor that offers the depth, speed, and temperature data from a single through-hull sensor that can be easily installed and connected directly to the network. Patented, speed-signal-processing enhancements provide excellent paddlewheel accuracy below 5 knots (6 MPH) and smooth linear output at all vessel speeds. The transducer’s wide, fan-shaped, port-starboard beam is able to find the bottom even when installed on steep deadrise hulls or heeling sailboats. You also get true water-temperature readings with the DST810’s reliable temperature sensor. ZG100 GPS (000-11048-002) The ZG100 GPS antenna provides precise and dependable position data making it the perfect partner for B & G chartplotters and instrument systems. The highly accurate 10 Hz GPS gives precise and smooth update of position information during acceleration and manoeuvring, rapid signal acquisition and consistent position accuracy augmented by secondary satellite systems like WAAS, EGNOS, MSAS and Galileo. It is also QZSS-ready. The integrated compass delivers accurate heading information for instruments, chart stabilisation for Head Up mode and Radar overlays. It also provides Heel and Trim data for sailing. Micro-C Backbone Kit & Cables (000-10760-001) NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5 m (15 ft) N2K cable, 3 x T-connectors, 2 x network terminators. Also included is 1x 2m and 1x 5m N2K cables.

i70s System Pack with Color Instrument & Wind, DST Transducers, iTC-5, 3M Backbone, T-Piece, Power & 2 Backbone Terminators  Instrument Data is Now Beautiful Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1” super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. Transducer Connectivity Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analog depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers. Customization The Raymarine i70s instrument is easily customized to suit your personal boating requirements. From traditional analog dials to engine information and tank levels, i70s has the capabilities to show it all. Package Contains: 1ea E70327 i70s Instrument 1ea E70010 ITC-5 1ea A22154 DST800 Transducer 1ea E22078 Standard Wind Transducer 2ea A06031 Backbone Terminator 1ea A06064 5-Way Connector 1ea A06035 Backbone Cable 3M 1ea A06049 Power Cable

Triton² Speed, Depth & Wireless Wind System Pack - Contains 2 Triton² 4.1" Color Display, DST810 Transducer, WS320 Wireless Wind Sensor & NMEA2000 Starter Kit The full-color Triton² displays provide sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Features Optical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging. Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity. Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display. Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system. Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton² is simple and quick to install Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen. With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller. Comes with N2K MICRO-C BACKBONE KIT - 000-10760-001 TRITON2 DIGITAL DISPLAY - 000-13294-001 (x2) WS320 (wireless) Interface - 000-14388-001  WS320 Wireless Wind Sensor - 000-14390-001 DST-810 DEPTH/SPEED/TEMP SENSOR - 000-15735-001

Triton² Speed, Depth & Wireless Wind System Pack - Contains Triton² 4.1" Color Display, DST810 Transducer, WS320 Wireless Wind Sensor & NMEA2000 Starter Kit The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Features Optical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging. Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity. Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display. Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system. Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton² is simple and quick to install Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen. With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller. Comes with N2K MICRO-C BACKBONE KIT - 000-10760-001 TRITON2 DIGITAL DISPLAY - 000-13294-001  WS320 (wireless) Interface - 000-14388-001  WS320 Wireless Wind Sensor - 000-14390-001 DST-810 DEPTH/SPEED/TEMP SENSOR - 000-15735-001