AT-6031 Metal Bond Adhesive AT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces, making it an ideal alternative to welding in many applications. The AT-6031 uses AT-651 mixing tips and comes in a 50mL cartridge. Compared to the previous version, users get 13mL more product at the same price. *AT-6031 has a 6-month shelf life and should always be stored refrigerated Features: The nozzle on the cartridge will never freeze up

No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures

No Slide Metal/Composite Bonder - Case of 10 Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures Case of 10

AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives.

Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.

10:1 Gun Plunger for AT-6030 Adhesive 10 Pack Gun Plunger for AT-6030 Adhesive

10:1 Gun Plunger for AT-6030 Adhesive Single Pack gun plunger for AT-6030 Adhesive

Aluminum Wire Tie Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.

Aluminum Wire Tie Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.

Adhesive Dispensing Gun The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

Executive Fastener Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc. The AT-1001008 Kit Contains: (1) AT-300 - Dispensing Gun (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (100) AT-5 - Large White Cable Tie Mount (50) AT-3 - Small White Cable Tie Mount (4) AT-113 - Large Footman's Strap (10) PS62-832-16SS - 1.00" Long Panel Stud (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base (1) Plano Storage Box 14" x 9" x 2.75" Step By Step Instructions

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts. ** AT 850 Mixing Tips sku 56273 required **

Acrylic Adhesive - 10-Pack CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.

AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10 Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers to ensure proper mixing before use. These mixing tips minimize waste compared with traditional 6" mixing tips.  This package contains 10 mixing tips. Features: 10 to 1 adhesive

AT-388 Dispensing Gun The AT-388 Adhesive dispensing gun comes with a 10:1 plunger. For Use With 50mL Cartridges of: AT-880 Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge.  The AT-880 is a 10:1 mix ratio with a teardrop-shaped cartridge, which will not fit in the other Weld Mount Systems dispensing guns.