Yacht Access Point - Dual Band Yacht AP (Access Points) are ideal for propagating WiFi throughout large vessels and those with hard to reach areas.  Ideal for steel and aluminum vessels the AP's are compact and economical.   The Yacht AP Dual Band uses both 2.4 and 5.Ghz for fast efficient coverage throughout any vessel.  Can also be used on Center Consoles or other small vessels to allow multiple users access to signals. Features: Ethernet – Gigabit Port Power-  24v PoE  Speeds - 300 Mbps to 867 Mbps Diameter - 6" In the Box: Yacht AP DB (Dual Band) PoE w/power supply (24 VDC) Mounting hardware Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wave WiFi Wave WiFi products are manufactured and distributed by Wave WiFi. Wave WiFi is the third generation of mobile WiFi products brought to market by Wave WiFi. Wave WiFi products offer outstanding performance because of the proprietary firmware technology embedded in each unit. The firmware permits the computer user to scan for public access points (HotSpots), select a HotSpot that will provide Internet connectivity and connect to that access point.

MBR 550 Network Router w/Cellular The Wave WiFI MBR 550 has an internal access point and is a Multi-Source Failover Router.  This means that it can manage multiple sources at a time as well as produce the wireless signal to distribute the data to wireless devices.  The MBR 550 will give you the ability to manage these sources from one easy to access browser based page. From this page you can manage any additional Wave WiFi devices such as access points and receivers, as well as third party satellite or cell devices. With the Wave WiFi MBR 550 you will enjoy the ability to travel with cell functionality built in.  The MBR 550 comes with a SIM slot for SIM activated Cell Data, and has all the other great features of the MBR 500. Also capable of supporting "Guest Networks." This means that any devices connected to the "Guest Network" will not have access to the MBR 550 manage page.  They will only be able to use the data provided by the MBR router and not be able to manipulate it. In the Box: MBR 550 Router Two (2) Access point antennas  Two (2) Cellular antennas One (1) 12VDC power cable One (1) Ethernet cable (Category 5)  Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MNC-1250 Dual-Band Network Router w/Cellular  The Wave WiFi MNC-1250 is a Dual-Band (DB) 2.4 and5Ghz wireless network controller with a built in SIM slot to access cellular data sources, dual internal access points, gigabit ports, multi-source failover functionality, and a host of other robust features to complete a vessels networking needs.  The MNC-1250 provides full usage exposure while providing the ability to control by source/by login code/or by user with features to manage accessibility, cap data, limit bandwidth, and blacklist macs and/or URL's from one easy to access browser based page on any chosen device. The SIM slot is designed to be universal and works with most SIM cards used throughout the world allowing users the ability to connect to a variety of cellular networks.  The ability to easily remove and replace the SIM means that users can choose their own providers based on the locations they travel to and the availability of service in any given area.  If the vessel leaves the country, or is foreign based, a foreign SIM can be acquired and used while in the prospective country.  This versatility of coverage and the ability to pay directly for cellular connectivity to the source country instead of relying on roaming agreements is ideal for cruisers. The Wave WiFi MNC-1250 is the most advanced and fastest marine network controller Wave Wi-Fi has developed to date and works well on all sizes and types of vessels. In the Box: MNC-1250 Router Two (2) 2.4 Ghz antennas  Two (2) 5 Ghz antennas Two (2) Cellular rubber duck antennas One (1) 12 VDC power cable One (1) Ethernet cable (Category 5)  Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

        Wave WiFi products have been providing long-range Internet connectivity to fisherman, cruisers and sailors worldwide.  Select Wave WiFi products are currently on sale at CLR Marine while supplies last.  Don't miss out on these super savings!       NEW PRODUCT - EC-HP & EC-ER Dual Band Models   Wave WiFi's EC-ER and EC-AP-ER Dual Band Models produce a whopping 800mW of output power providing extended range connections to good quality HotSpots. The ER Dual Band models have all of the features and elements of the EC-Series that have made Wave WiFi so popular for convenience and dependability. All ER Dual Band Models ship with the latest firmware version of Wave WiFi's proprietary web-based interface.  Wave WiFi's EC-HP and EC-AP-HP Dual Band Models produce the highest allowable output power of 1 Watt providing long-range connections to good quality HotSpots. The EC-HP Dual Band Model supplies maximum receive sensitivity (-97dBm @ 1-11mbs G). Both HP Dual Band Models support MIMO technology with the optional second external antenna package and factory MIMO activation.       NEW PRODUCT - Rogue Pro Dual Band The Rogue Pro Dual Band features the same trouble free, high powered performance of the Rogue Wave in a sealed, polished stainless steel case. The Rogue Pro Dual Band has an integral 1″-14 ready base for numerous standard marine antenna mounts.     Specials   Closeouts    Remanufactured    Rebates    

Rogue Wave Wifi Antenna The Rogue Wave by Wave WiFi is a compact Wireless Receiver with an output 800mW of power. This power receiver has all the features and elements of the larger EC-Series like the user-friendly, proprietary web-based interface in the easy to set-up kit. The Rogue comes with an 8.5dB omnidirectional outdoor antenna and is powered by Power over Ethernet (PoE). This means there is a single cable between the computer or router and the Rogue.  The Rogue can also be used with a variety of remote mounts, 2.4 GHz omnidirectional antennas. Like all Wave WiFi models, the Rogue Wave is an Ethernet Converter (EC) so a direct connection can be made to any Ethernet-enabled device, router, or switch.  This means that, when connected to a wireless router, the Rogue Wave provides Internet connectivity for numerous wireless devices aboard the boat.  There is no software to install and no power-robbing USB connections. The ultra-small size of the Rogue Wave makes it the ideal ‘personal’ wireless receiver for delivery captains and crew.  The Rogue is perfect for wireless Internet access on a smaller boat or an RV. Features: Supports 2.4Ghz Wi-Fi frequencies Up to 7-mile range* Easy to use proprietary web-based Wave WiFi Interface Compact, ultra-small design *Actual distance may be affected by the strength and quality of the hot spot signal, as well as having a clear line-of-site to the boat. In the Box: Wave WiFi Rogue Wave marine antenna PoE with power supply (12VDC wall adapter and cigarette lighter adapter)  25' Ethernet cable (Category 5) Rail Mount - Stainless Steel Quick start guide and manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MBR-300 Pro Marine Broadband Router - 3 Source The Wave WiFi Marine Broadband Router (MBR) 300 PRO is a cost-effective Broadband source selector suitable for a sportfish or small yachts. The MBR-300 PRO is the central control element for a robust internet communications system, with a powerful Intel 1.8GHz 64 Bit Dual Core Processor, 2 Gigabit of RAM, 8 Gigabit Solid Date Drive, and Four (4) 1 Gigabit Ethernet Ports allowing for seamless network traffic. Features: Plug and play setup Content filter Download/upload speed control Allowed IP and MAC addresses Free and controlled Internet access Login page configuration WAN port selection for multiple devices 1-year limited warranty Firewall Traffic monitoring and blocking of non-approved data traffic Login Page Customization Branded page, personalized for your yacht Login page access code generator Login code usage reporting Operation Marine grade equipment suitable for any ship data network environment This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MBR-700 Pro Marine Broadband Router - 8 Source The Wave WiFi Marine Broadband Router (MBR) 700 PRO is a cost-effective Broadband source selector suitable for a sportfish and mega yachts. The MBR- 700 PRO is the central control element for a robust internet communications system, with a powerful Intel 1.8GHz 64 Bit Dual Core Processor with 2 Gigabit of RAM, 8 Gigabit Solid State Drive, Four (4) 1 Gigabit Ethernet Ports, and Four (4) 10/100 Megabit ports allowing for seamless network traffic. Features: Plug and play setup Content filter Download/upload speed control Allowed IP and MAC addresses Free and controlled Internet access Login page configuration WAN port selection for multiple devices 1-year limited warranty Firewall Traffic monitoring and blocking of non-approved data traffic Login Page Customization Branded page, personalized for your yacht Login page access code generator Login code usage reporting Operation Marine grade equipment suitable for any ship data network environment This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Tidal Wave Dual-Band - Cellular Receiver  Wave WiFi’s New High Powered Dual Band (DB) 3G/4G model boasts concurrent listening on three different frequency bands at the same time -  2.4Ghz and 5.1 – 5.8Ghz WiFi and SIM Cell Data.  The Tidal Wave has a one gigabit Ethernet port and isn’t afraid to use it.  This model provides further connection ranges than any other Wave WiFi device.  All Wave WiFi models ship with our feature rich customer inspired browser-based user interface, and come with all accessories necessary to get you up and running.  The Tidal Wave model supports all encryption types, along with SIM cell data bands on the cellular side.  There is no software to install which means better plug and play performance for computer accessories.  Enjoy the Luxury of WiFi & Cell on the Water. Features: Supports 2.4GHz / 5GHz (5.1-5.8) Wi-Fi frequencies Supports SIM Activated Cell Data Bands One Gigabit 10/100/1000 Mbit/s Fast Ethernet Port Uses MiMo (Multiple Inputs Multiple Outputs) on all supported frequencies In the Box: Tidal Wave Dual-Band - Cellular receiver  Two (2) 3’ Outdoor High Gain Omnidirectional Dual Band antennas Two (2) Indoor rubber duck Dual-Band antennas for WiFi Two (2) 25’ Ultra Flex low loss 400 antenna cables 25' Ethernet cable (Category 5) PoE w/power (12 VDC wall adapter) One (1) rubber duck cellular antenna One (1) High Gain external outdoor cellular antenna with cable (30') Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MBR 500 Router The Wave WiFi MBR 500 has an internal access point and is a Multi-Source Failover Router.  This means that it can manage multiple sources at a time as well as produce the wireless signal to distribute the data to wireless devices. The MBR 500 will give you the ability to manage these sources from one easy to access browser based page. From this page you can manage any additional Wave WiFi devices such as access points and receivers, as well as third party satellite or cell devices. Also capable of supporting "Guest Networks."  This means that any devices connected to the "Guest Network" will not have access to the MBR 500 manage page.  They will only be able to use the data provided by the MBR router and not be able to manipulate it. In the Box: MBR 500 Router Two (2) Access point antennas  One (1) 12VDC power cable One (1) Ethernet cable (Category 5)  Quick start guide & manual *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EC ER Dual-Band Receiver Wave WiFi’s EC-ER (Extended Range) Dual-Band (DB) model connects to good quality HotSpots.  The EC ER Model has all the features and elements of the EC-Series that have made Wave WiFi so popular for convenience and dependability.  All ER until ship with the latest firmware versions of Wave WiFi’s proprietary web-based interface.  The EC-ER DB model supports WEP, WPA and WPA2 encryption and are Ethernet Converter (EC).  Therefore, a direct connection can be made to any Ethernet enabled device resulting in flawless performance as a standalone system or integrated into the boats network.  Like all Wave WiFi devices, the EC ER DB has a Web-based friendly user interface.  There is no software installation.  This means better performance for plug-and-play computer accessories. The EC ER DB comes with 25' of low loss cable that is then connected to a powerful Dual-Band Omni-Directional antenna, giving the system an incredible amount of range.  The system is a more affordable midrange solution when comparing to the shorter range Rogue systems. Features: The 600Mhz processor delivers faster response times from the user interface Capable of up to 125Mbit aggregate throughout Supports concurrent 2.4Ghz / 5Ghz Wi-Fi frequencies User friendly proprietary Web-based Wave WiFi Interface Weather resistant enclosure Longer range than Rogue devices In the Box: EC ER Dual-Band receiver  2' Dual-Band Omni-Directional Antenna 25' Ethernet cable (Category 5) 10' 12 VDC power cable 25' of low-loss antenna cabling with a spare Male “N” connector Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rogue Pro Wifi Antenna The Rogue Pro features the same trouble free, high powered performance of the Rogue Wave in a sealed, polished stainless steel case.  The Rogue Pro has an integral 1″-14 ready base for numerous standard marine antenna mounts. In addition to the enhanced dust and moisture resistance, the stainless steel housing offers superior heat transfer and impact resistance.  The Rogue Pro was developed in response to a need for an extremely ruggedized WiFi device for commercial, military and Homeland Security projects. Like all Wave WiFi models, the Rogue Pro is an Ethernet Converter (EC) so a direct connection can be made to any Ethernet enabled device, router or switch.  This means that, when connected to a wireless router, the Rogue Pro provides Internet connectivity for numerous wireless devices aboard the boat.  There is no software to install. Features: Supports 2.4Ghz Wi-Fi frequencies Up to 7-mile range* Easy to use proprietary web-based Wave WiFi Interface 1" - 14 Thread mount base Marinized Stainless Steel body extends the life of the unit on the water *Actual distance may be affected by the strength and quality of the hot spot signal, as well as having a clear line-of-site to the boat. In the Box: Wave WiFi Rogue Pro marine antenna  8.5db Marine antenna PoE w/power supply (12VDC wall adapter & cigarette lighter adapter)  25' Ethernet cable (Category 5) 1" - 14 Thread Mount - Stainless Steel Quick start guide & manual *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EC HP Dual-Band - AC Receiver Wave WiFi’s EC- HP (High Powered) Dual-Band (DB) AC speed (AC) model produces the highest allowable output power of 1 watt, providing long-range connection to good quality hot spots.   HP models support MIMO technology with optional second external antenna on the 2.4 GHz EC HP .  Like all Wave WiFi devices, the EC ER DB AChas a Web-based friendly user interface.  There is no software installation.  This means better performance for plug-and-play computer accessories.  All HP models support WEP, WPA and WPA2 encryption and are Ethernet Converts (EC).  Therefore, a direct connection can be made to any Ethernet enabled device resulting in flawless performance as a standalone system or integrated into the boats network.   Features: The 600Mhz processor delivers faster response times from the user interface One Gigabit ethernet port Supports concurrent 2.4Ghz / 5Ghz Wi-Fi frequencies User friendly proprietary web-based Wave WiFi Interface Weather resistant enclosure High powered Dual-Band receiver for longer range In the Box: EC HP Dual-Band AC receiver  25' Ethernet cable (Category 5) 10' 12 VDC power cable 25' of low loss antenna cabling with two (2) spare Male “N” connectors Two (2) Dual-Band Omni- Directional N-Female antennas Two rubber duck Dual-Band Omni-Directional antennas Quick start guide & manual *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rogue Pro Dual-Band Wifi Antenna  The Rogue Pro DB features the same trouble free, high powered performance of the Rogue Wave in a sealed, polished stainless steel case.  The Rogue Pro DB has an integral 1″-14 ready base for numerous standard marine antenna mounts.  In addition to the enhanced dust and moisture resistance, the stainless steel housing offers superior heat transfer and impact resistance.  The Rogue Pro DB was developed in response to a need for an extremely ruggedized WiFi device for commercial, military and Homeland Security projects. Like all Wave WiFi models, the Rogue Pro DB is an Ethernet Converter (EC) so a direct connection can be made to any Ethernet enabled device, router or switch.  This means that, when connected to a wireless router, the Rogue Pro DB provides Internet connectivity for numerous wireless devices aboard the boat.  There is no software to install. Features: Supports concurrent 2.4Ghz / 5Ghz Wi-Fi frequencies Up to 7-mile range* Completely enclosed for total weather protection and endless installation options Marinized rugged stainless steel body for better weather protection 1" - 14 Thread mount base Easy to use proprietary web-based Wave WiFi Interface *Actual distance may be affected by the strength and quality of the hot spot signal, as well as having a clear line of site to the boat.  In the Box::  Wave WiFi Rogue Pro DB marine antenna  PoE w/power (12VDC wall adapter & cigarette lighter adapter) 25' Ethernet cable (Category 5) Quick start guide & manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MNC-1200 Dual-Band Network Router The Wave WiFi MNC-1200 is a Dual-Band 2.4 and 5Ghz wireless network controller with dual internal access points, gigabit ports, Multi-Source failover functionality, and a host of other robust features to complete a vessels networking needs.  The MNC-1200 provides full usage exposure while providing the ability to control by source/by login code/or by user with features to manage accessibility, cap data, limit bandwidth, and blacklist macs and/or URL's from one easy to access browser based page on any chosen device. In the Box: MNC-1200 Router Two (2) 2.4 Ghz antennas  Two (2) 5 Ghz antennas One (1) 12 VDC power Cable One (1) Ethernet cable (Category 5)  Quick start guide & manual *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.