Convenient Dual Battery Bank Charging Xantrex digital echocharge (part#82-0123-01) is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex echocharge detects when the house battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by echocharge is limited to 15 amps. Product Features 15 A maximum charge current Automatically adjusts for 12 or 24 volt battery banks (both battery banks must be the same DC voltage and battery type) Automatically switches on/off without affecting the in-house battery bank or over-charging Utilizes excess current from the primary charging source Built-in thermal and over-current circuits Reverse polarity protection Easy three wire installation WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

XPLORE Battery Charger - 12V - 120 Amp - 6-Bank The XPLORE 120/12 battery charger is the largest and most powerful charger on the market today. The universal, auto-ranging AC input and 120 amps of output current ensure ultra-fast and reliable worldwide charging. With up to six output banks of simultaneous charging combined with the ability to charge two battery banks with differing chemistries, the XPLORE 120/12 eliminates the need to have separate single-chemistry chargers and minimizes installation and wiring costs for your house bank and engine bank. It is also equipped with an easy-to-read front panel LED display for basic configuration and status information. Advanced monitoring and configuration are enabled by NMEA 2000 protocol or Xantrex app using the Xantrex BLE module. Performance Features: 6 Battery Banks and Dual-Chemistry Charging Xantrex Lithium and Custom Battery Charging NMEA 2000 Connectivity Xantrex App Connectivity Auto-ranging universal input voltage (80-265 Vac, 45-65 Hz) Power Share: automatically reduces charging output to prevent nuisance tripping of the AC input breaker. Quiet Mode: when enabled, the internal fan is turned off and the charger operates at a reduced output when quietness is needed. Storage Mode: automatically refreshes your batteries once every several days of non-use to ensure optimal battery condition. Dead Battery Charging: the ability to charge a battery as low as 0V back to full-charge  Protection Features: Reverse battery polarity protection Drip-proof design Over and under-temperature protection DC over-voltage protection Battery overcharging protection

Battery Status and Freedom Inverter/Charger Remote Control Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Note: Not for Freedom HF or Freedom SW Series. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04 WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Freedom 458 Inverter/Charger AC Power Inverter with High Surge Capability, 3-Stage Charger With filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation. Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Electrical Specifications - Inverter Output power (continuous): 2000W Surge power (AC amps): 50A Output frequency regulation: 60Hz Inverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine wave Efficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12A AC output connections: Dual - 20/15 Circuit Breakers AC input connections: Single AC transfer switch: 30A Electrical Specifications - Charger Charge rate: 100A DC AC input voltage range: 90 130 VAC Battery voltage (nominal): 12 VDC Battery voltage range: 10.0 15.5 VDC Low battery cut-out: 10.0 VDC AC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDC Charge control: 3-stage Battery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: Yes Temperature sensitive charging: Yes ***Default value varies with battery type and temperature WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

ROKK 10W Waterproof Wireless Charger - Surface Mount The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Working directly with 12/24V systems, ROKK Wireless is ideal for life on the move and is perfect for sail and powerboats, and also RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe, wireless charging anywhere on board. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface and leave the top surface un-cluttered and looking perfect. Simply etch in your logo to identify the charge location. Ideal for GRP or wood, the unit can be installed under tables, cabinets, consoles, or worktops.  The installation system is simple to install and works with various panel depths and materials. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV or outdoor location.  Four screws secure the unit onto any flat surface with a simple installation guide and drilling template.  A waterproof cable pass-through completes the IPX6 sealed installation. Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.86" (98mm) x .67" (17mm) In the Box: Charger Mounting hardware Instruction manual  *Sold as an Individual

This item is drop shipped direct from Xantrex free lower 48 states only  Lithium Iron Phosphate (LiFePO4) Battery - 240AH - 12VDC High-cycle Lithium Iron Phosphate (LiFePO4) battery with built-in BMS. Heavy-duty metal enclosure battery for taking on the most extreme environments and scenarios. A key component of the Xantrex FREEDOM eGEN System.  More Power In Less Space The Xantrex Lithium Iron Phosphate (LiFePO4) battery uses UL1973 certified cells. Equipped with redundant safety features, the Xantrex Lithium Iron Phosphate battery is the safest on the market today. Specifically designed to withstand the harsh operating environments of mobile and marine applications, the Xantrex Lithium Iron Phosphate battery lasts up to 6,000 cycles compared to traditional lead acid or AGM battery, which typically lasts 400-500 cycles. The Xantrex Lithium Iron Phosphate battery offers exceptional power density and is also available with a heating blanket option if installation is outside the main cabin. Features: Internal BMS - Reduces footprint Cell Balancing - Extends the lifetime of the battery LEDs - Monitor State of Charge Remote Panel - View the status of the battery, turn the battery on and off Bluetooth - Connect to the Xantrex mobile app to view the status of the battery Parallel Stack - For up to 2 batteries Applications: Recreational Vehicles Heavy Duty Trucks Work Trucks Marine Specialty Vehicles This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

This item is drop shipped direct from Xantrex free lower 48 states only Lithium Iron Phosphate (LiFePO4) Battery - 105AH - 12VDC High-cycle Lithium Iron Phosphate (LiFePO4) battery with built-in BMS. Heavy-duty metal enclosure battery for taking on the most extreme environments and scenarios. A key component of the Xantrex FREEDOM eGEN System.  More Power In Less Space The Xantrex Lithium Iron Phosphate (LiFePO4) battery uses UL1973 certified cells. Equipped with redundant safety features, the Xantrex Lithium Iron Phosphate battery is the safest on the market today. Specifically designed to withstand the harsh operating environments of mobile and marine applications, the Xantrex Lithium Iron Phosphate battery lasts up to 6,000 cycles compared to traditional lead acid or AGM battery, which typically lasts 400-500 cycles. The Xantrex Lithium Iron Phosphate battery offers exceptional power density and is also available with a heating blanket option if installation is outside the main cabin. Features: Internal BMS - Reduces footprint Cell Balancing - Extends the lifetime of the battery LEDs - Monitor State of Charge Remote Panel - View the status of the battery, turn the battery on and off Bluetooth - Connect to the Xantrex mobile app to view the status of the battery Parallel Stack - For up to 2 batteries Applications: Recreational Vehicles Heavy Duty Trucks Work Trucks Marine Specialty Vehicles This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

C-Series Solar Charge Controller - 35 Amps PV charge, diversion and load controller The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate. A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. Features: Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging Two-year standard warranty PV charge, diversion, load controller Available remote display with cumulative AMP hours Electronic protection against short-circuit, overload, and over-temperature conditions Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure Field adjustable voltage and battery set point Automatically disconnects from the battery at night Compatible with negative ground and ungrounded systems WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

C-Series Solar Charge Controller - 40 Amps PV charge, diversion and load controller The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate. A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. Features: Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging Two-year standard warranty PV charge, diversion, load controller Available remote display with cumulative AMP hours Electronic protection against short-circuit, overload, and over-temperature conditions Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure Field adjustable voltage and battery set point Automatically disconnects from the battery at night Compatible with negative ground and ungrounded systems WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

C-Series Solar Charge Controller - 60 Amps PV charge, diversion and load controller The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate. A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. Features: Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging Two-year standard warranty PV charge, diversion, load controller Available remote display with cumulative AMP hours Electronic protection against short-circuit, overload, and over-temperature conditions Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure Field adjustable voltage and battery set point Automatically disconnects from the battery at night Compatible with negative ground and ungrounded systems WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

C-Series Solar Charge Controller - 12 Amps PV charge, lighting and load controller The C12 charge, lighting, or load controller is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization. Standard in the C12’s load control circuitry are field adjustable low voltage disconnect and reconnect points, along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller. Lighting run time is adjustable from two to eight hours or can be set from dusk to dawn operation. It is used worldwide in a variety of applications, including remote village lighting systems and automatic outdoor lighting. An optional battery temperature sensor manages battery charging based on battery temperature. Features: Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging Two-year standard warranty PV charge and load controller Automatic lighting controller Electronic detection of short-circuit, overload, over-temperature and reverse polarity conditions Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure Field adjustable voltage and battery set point Automatically disconnects from the battery at night Compatible with negative ground and ungrounded systems WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

ROKK 10W Waterproof Wireless Charger - Hidden The IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual

115W Solar Max Flex Panel This Xantrex Solar Max panel features solar panels with mesh grid technology that provides superior durability and performance benefits. With approximately 2000 contact points per cell, this mesh grid technology allows the panel to flex up to 180 degrees without impacting power output. Subject to extreme environmental and accelerated lifecycle testing beyond regulatory standards, the Max panel was tested 50 times more durable than a standard flexible panel.  It is also designed with a highly protective top layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), which allows for better light transmittance, corrosion resistance, stain resistance, weather resistance, and overall superior durability over a wide temperature range compared to non-ETFE semi-flexible-panels.  Features: Premium peel-and-stick flexible solar panel Harvest up to 20% more energy during the day in low-light or shaded conditions compared to a standard solar panel Applications: Recreational vehicles Heavy-duty trucks Marine Work trucks Specialty vehicles Specifications Electrical Specifications: Maximum Power-Pmax (W) at STC*: 115 Maximum Power Voltage-Vmp (V): 22.1 Maximum Power Current-Imp (A): 5.2 Open Circuit Voltage-Voc (V): 27.4 Short-Circuit Current-Isc (A): 5.6 Maximum System Voltage (V): 600 Mechanical Specifications:  Cell Type: Mono-Crystalline PERC     Top-Layer: ETFE Junction Box: IP67 Rated Connector: MC4 – type Number of Cells: 42 (6 x 7) Weight: 6.0 lb (2.7 kg) Dimensions (L x W x D): 37.5 x 28.4 x 0.08 in (953 x 722 x 2 mm) Temperature Specifications: Operating Temperature: -40–85 degrees C Temperature Coefficients of Pmax: -0.39%/ degrees C Temperature Coefficients of Voc: -0.30%/ degrees C Temperature Coefficients of Isc: +0.06%/ degrees C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

On/Off Remote Control Panel Xantrex On/Off Remote Control Panel is made specifically for Xantrex Freedom SW2012 and SW3012. Features: The Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter via the Remote port on the AC/DC side panel to turn the Freedom SW Inverter ON or OFF from a more convenient location The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter When this feature is enabled, the Freedom SW Inverter will shutdown if the vehicle's ignition is not engaged (not in ACC position) to prevent unnecessary battery drain Includes a 25 foot (7.6-m) communications cable Choose a location that is dry, free from corrosive or explosive fumes, and appropriate for installing an electronic device WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

ChargeMaster Plus 12/75-3 CZone - 3-Bank ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges a maximum of three batteries in a fast and safe way and works anywhere in the world. Battery’s Best Friend With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method. Other unique features are: Revival mode: automatically revives even fully depleted batteries. Priority Charge: redirect available power to the lowest battery, for faster charging. Smart Input: charge all three batteries from one single alternator for continuous charging on the go. Global Charging The ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, the ChargeMaster Plus is CE, ABYC, UL, SAE, CEC and RCM/C-Tick compliant. System Simplicity Nowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of all three outputs in an understandable way. Robust and ergonomic connections save installation time. An integrated VSR eliminates the need for additional components and ensures that the alternators energy is funnelled through to the batteries. Powerful Connections In modern applications, all components work together, the ChargeMaster Plus supports not only MasterBus but also CZone and NMEA. This enables the charger to communicate with displays, shunts and power systems including communication standards like, FireCan, CANopen and many more. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat. Features: MasterBus, CZone and NMEA communication Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small battery banks on a single battery charger Charges multiple batteries while being underway Extended specifications: offers 20 % more output at 14.4 V and 80 % charging power at 60 °C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275 V AC, 35-70 Hz Compact, easy to connect and quick to install Specifications: Nominal Output Voltage: 12V Max Charge Current Per Output: 75A Number of Battery Outlets: 3 (max.) Display/Read-Out: LED Display Total Charge Current: 75A at 14.4V