Molded Stick Clip Kit - 3/4" Clips Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 3/4 in. clips

Drain Plug And Receiver Kit - 3/4" Diameter The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.  Features: Molded black plastic with threaded receiver Molded retaining strap Includes attaching screws and elastomeric gasket for a watertight fit Specifications: Diameter: (inch) 3/4" *Intended for use on small recreational boats and jet skis

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Groco Ibv-750 3/4 Bronze Ball Valve  

Leather Mooring Line Chafe Kit - 3/4"  Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bosworth 74-B-3/4   3/4" Barb   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb

Jabsco Pump Head Only Brz Hk 040 Bsp FEATURES Pump Body: Bronze Head Kit with Motor Adaptor Port Size: 3/4" BSP internal thread Flow: up to 35 litres/minute @ 1500 RPM Impeller: Neoprene or Nitrile Shaft Seal: Carbon/Ceramic mechanical seal, Nitrile. Shaft: Stainless steel shaft extension Motor Bracket: Epoxy-coated aluminium, suitable for B3/B14 D80 frame motor to IEC 71 standard     APPLICATIONS / CHARACTERISTICS Self primes from dry up to 3.0 metres. Handles hard or soft solids. Non pulsating flow. Gentle pump action does not damage shear-sensitive products. Easy to service and maintain.   INDUSTRIAL : From water to the most difficult, e.g. transferring foaming solutions with entrained air or solids, such as soap, circulating abrasive and non abrasive slurries. Transferring inks, dyes, starches etc.     CHEMICAL : Circulating and transferring various chemicals such as ammonia, barium, copper sulphate, glycerine, nickel chloride, silver nitrate; various acids such as boric, carbonic, citric and photo processing solutions      Jabsco Bronze Pump Head Only Kit 3/4" British Standard Pipe Internal Threads, Nitrile Impeller  

Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75

Bosworth 74-3/4M Foot Check Valve   Bosworth Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Male Threads

Ampco Bi8202801-4.50, Bronze Impeller for KC2 1 3/4

March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump

Molded Paddle/Pole Clip Kit - 1-1/4" Clips  Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 1-1/4 in. clips

Universal Drain Plug Kit Add or replace the drain plugs on any kayak with the YakGear Universal Drain Plug Kit. This kit provides the two most used kayak and paddleboat drain plugs with a wide thread (red washer) and a fine thread (black washer) to accommodate most paddlers. Both drain plugs come with a top flange.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Universal drain plug kit to add or replace old drain plugs One wide thread drain plug and one fine thread drain plug provided Installation instructions and hardware are included 1-year warranty

Charlevoix® Flag Clip - One-Piece Fits 3/4" Pole The original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi-permanently to your pole and will keep your flag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired.

Kite Spring Release Clip Tigress has put together the most comprehensive line of kite fishing products available to the sportfishing industry.