ComfortGrip™ 12" *3-Pack Edson’s iconic ComfortGrip™, now in 12” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensure these grips can withstand the harshest conditions! The 12" ComfortGrip™ includes three grips to fit just about any application.  Adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more! Specifications: Comfortable ergonomic grips with finger grooves Made from high-performance Santoprene Designed to fit on to 1" to 1.25" diameter railings

ComfortGrip™ 8" *3-Pack Edson’s iconic ComfortGrip™, now in 8” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensure these grips can withstand the harshest conditions! The 8" ComfortGrip™ includes three grips to fit just about any application.  Adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more! Specifications: Comfortable ergonomic grips with finger grooves Made from high-performance Santoprene Designed to fit on to 1" to 1.25" diameter railings

Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Black Package of 3 Black 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm) Wire Range: 2-4/0 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Red Package of 3 Red 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm) Wire Range: 2-4/0 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Wall Heat Shrink Tubing - 3/4" x 12" - 3-Pack - Red Package of 3 Red 12"(30.5cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm) Wire Range: 8-2/0 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief 3:1 Ratio Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Wall Heat Shrink Tubing - 3/4" x 12" - 3-Pack - Black Package of 3 Black 12"(30.5cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm) Wire Range: 8-2/0 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief 3:1 Ratio Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RCA Cable Twisted Pair - 12' (3.7M) When installing a marine audio system on a boat, RV, or power sports vehicle, don't skimp by using regular patch cables. Marine Audio RCA cables are designed to deliver high performance and long life. Impervious to the elements and built to ABYC standards. Features: 12 ft. (3.7 meters) in length Specifications:  Type: RCA cable twisted pair *Sold as an Individual

FLX-12 Pro Pack II with 12° Ice Ducer A Pro Pack carry case fits into a five gallon bucket for transport and offers a rod holder and tackle box too. When you put the FLX-12 using Vexilar’s brushless data transfer technology, you get a sunlight readable display with a built in low power mode and ranges to 120 feet. This pack is ready for the ice right out of the package with a 12 degree Ice Ducer transducer. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Actuator Marine Hardware Pack High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FLX-12 Genz Pack with 12° Ice Ducer The Genz pack carry case, when rigged with a FLX-12 flasher and tricked out with the DD-100 to give you digital depth readouts, will get you ready for the ice. The classic Blue Genz pack case was designed by Mr.  Ice fishing himself, Dave Genz.  Genz loves this case because it is tough and easily adapted to other upgrades.  Comes standard with a 12 volt- 9 Amp hour battery and fully automatic digital charger.  The Genz Pack with the FLX12 comes standard with a 12 degree IceDucer transducer.  This unit is a step-upfrom the Classic FL-8se unit.  The FLX-12 offers a flat-screen display, but now with Vexilar’s exclusive brushless data transfer technology. The LEDs deliver a 20% brighter and sharper display.  This unit has a special low power mode option that allows you to fish in extremely shallow water with great target resolution.  Five depth ranges to 120 feet.  It offers a unique night mode option so the display is easier to view at night and also lights up the center depth graphics.  There are 20 steps of Interference rejection (IR) to help knock-out interference from other sonar systems. If your battery is running low, the display gives a coded series of flashes long before the unit shuts down. The FLX-12 is VERY popular for open water use as well.   WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP2040-19 SystemPod Pre-Cut for Raymarine es97/es98 & 1 Instrument for 12" Guard NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

GP2040-95 SystemPod Pre-Cut for Raymarine gS95 Glass Bridge & Space for 12" Wide Guard NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.

GP2500-33 SystemPod Pre-Cut for Raymarine AXIOM 7 & 1 Instrument for 12" Wide Guard *Requires Raymarine #A80498 Front Mount Kit for AXIOM 7 & Right Angled with NMEA 2000 Connector) - Pre-Cut for Front Mount SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

DS-H6-BLK Horizontal Cable Seal - Black *3-Pack This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.  Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack

GP2059 SailPod Precut for Raymarine c95/c97 & e95/e97 for 12" Wide Pedestal Guard Part #: GP2059 NavPod Protects Your Electronics In Harsh Conditions The GP2059 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 12" wide pedestal guard.