|
Triple Lock Rectangular Marine Hatch - 10" x 14" - Black
This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7" and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.59 |
|
|
Triple Lock Rectangular Marine Hatch - 10" x 14" - White
This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7" and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.59 |
|
|
Big B™ Fender - 10" x 26" - Black Onyx
The versatile Big B™ fender incorporates a center rope tube that allows end-to-end line passage. Big B™ inflatable vinyl fenders feature a seamless construction with molded ribs to minimize roll. Big B™’s are made from the highest quality marine-grade vinyl with a high gloss finish.
Features:
Rubber football needle valve for easy inflation and long life
The 3/4" diameter center hole accepts up to 5/8" diameter rope to secure the fender
Fenders can be hung vertically or horizontally with a single line
End-to-end rope passage - horizontal hanging is useful for protection against pilings and tidal change areas
Matches boat gel coat with patented color-matching process
Tough marine-grade vinyl tolerates the harsh elements
Specifications:
Diameter x Length: 10 x 26 inches
Boat Size: 35 to 50 ft.
Color: Black Onyx
|
94.75 |
|
|
Gas Filled Lift Spring - 10" - 60#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.57 |
|
|
Gas Filled Lift Spring - 10" - 20#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.85 |
|
|
Gas Filled Lift Spring - 10" - 40#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.57 |
|
|
Kayak Recreational Footbrace with Rudder Control
This Kayak Recreational Footbrace with Rudder Control includes the addition of a channeled track to slide in, adding rudder control functionality to Sea Dog’s standard Recreational Footbrace.
Features:
Measures 14-1/2 inches apart
Proudly constructed in the USA of injection-molded polypropylene and glass-filled nylon
Specifications:
Track Type: Standard
Weight: 1.55 lbs
Fastener Size: 1/4 in.
|
26.64 |
|
|
2702 DualBus 100AMP Common BusBar 10 x 8-32 Screw Terminal
Features:
Combines negative and positive buses on one block
Tin-Plated Copper CDA 110 / UNS 11000
UL 94-V0 Rated, Glass Reinforced Thermoplastics
#8-32 Screw
10 per bus
Maximum Voltage: 300V AC / 48V DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.76 |
|
|
12" Modular Mount AFT Raked 10" x 10" Base Plate for Large Sat Domes - 18" Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
436.80 |
|
|
18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
552.00 |
|
|
SHURflo 84-660-10, Manifold Assembly Black
|
14.18 |
|
|
Kayak Hatch Cover - VCP Oval
The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal.
This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim.
*Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products.
Features:
Proudly constructed in the USA of injection molded nylon and polypropylene
Lid only
Specifications:
Diameter: 17-1/4 in.
Style: Performance
Weight: 1.30 lb.
|
47.21 |
|
|
Kayak Hatch Cover - 8" - VCP Oval
The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal.
This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim.
*Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products.
Features:
Proudly constructed in the USA of injection molded nylon and polypropylene
Lid only
Specifications:
Diameter: 8 in.
Style: Performance
Weight: 0.55 lb.
|
26.64 |
|
|
Gas Filled Lift Spring - 20" - 40#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.40 |
|
|
Stainless Steel/Nylon Hatch Spring
This strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on both ends. Installs with eight #10 RH fasteners (not included).
|
45.10 |
|