|
White Trim Ring & Screen Kit
Trim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim piece and a hinged (and detachable) flyscreen to keep mosquitoes and other pesky insects out of the boat. The hatch latches may be accessed easily thanks to the hinged screen.
Features:
White trim ring and screen kit for Lewmar hatch size 54
Can only be fitted to boats with a headliner
The trim flange can be cut to length to suit a range of deck thicknesses up to 2-7/16 in. for low/medium profile hatches, and 2-13/16 in. for flanged ocean hatches
Can't be used on flat base ocean hatches
|
186.41 |
|
|
Large Winch Pawl & Spring Repair Kit
Replacement pawl and pawl spring kit.
Compatible With:
Lewmar size 50 to 64 winches
In the Box:
Six (6) Large pawls
12 Pawl springs
*Sold as an Individual
|
73.45 |
|
|
A3C Downlight Kit - Warm White with Stainless Steel, White, & Black Trim Rings
Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.
Features:
Warm white (includes stainless steel, white, and black trim rings)
12 Volt - 2.8 Watt
12 pieces LEDs
300 Lumens
IP67
Applications:
It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
Other applications include hard tops, arches, walkways, overhangs, and shower stalls
*The "P" within the part number indicates retail packaging
|
23.81 |
|
|
A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim Rings
Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.
Features:
Cool white (includes stainless steel, white, and black trim rings)
12 Volt - 2.8 Watt
12 pieces LEDs
300 Lumens
IP67
Applications:
It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
Other applications include hard tops, arches, walkways, overhangs, and shower stalls
*The "P" within the part number indicates retail packaging
|
23.81 |
|
|
Teak Trim Ring
5-3/8" Diameter Trim Ring
3" Inner Diameter Opening
3/8" Thick
5" Inner Diameter (Inside Flange)
Pre-Drilled Mounting Holes
Back Recessed, 1/8" Flange
Use to trim out portholes
|
30.90 |
|
|
Teak Trim Ring
6-3/8" Diameter Trim Ring
4" Inner Diameter Opening
3/8" Thick
6" Inner Diameter (Inside Flange)
Pre-Drilled Mounting Holes
Back Recessed, 1/8" Flange
Use to trim out portholes
|
42.91 |
|
|
129ATP Hydraulic Trim Tab Complete Kit with Auto Trim Pro
Hydraulic trim tabs are known for power, precision and durability. Get the most from your boat, no matter what the load, speed or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride and get on plane faster.
Kits Include:
(2) Trim plane assemblies
(2) Hydraulic actuators
(1) Hydraulic Power Unit
Hydraulic tubing and hardware
Helm Control
Features:
Get on plane fast and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/M120) provides 30% more lift
Bottom and piano hinge mounts are available for custom order
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1030.46 |
|
|
62 Series RV Carbon Monoxide - White - Flush Mount - 12V with Trim Ring
Features:
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
NMMA Listed Component.
Space Saving design works in harsh marine environments.
Works in extreme temperatures. Only CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
End of Life Signal alerts boater to replace the alarm after 5 years of service.
Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.
Specifications:
Conforms To ANSI / UL STD 2034*
* Testing Laboratory: ETL/Intertek
Alarm Point: 400 PPM 4-15 Minutes
Low voltage power warning at 7 Volts
Power Supply and Current Draw: 37 mA @ 13.8 VDC
Operational Range: 13.8 Volts +/-15%
Low voltage power warning at 7 Volts
Operating Temperature: -40°F to +158°F
Case Size: 4.5″W x 3.25″H x 1.25″D
|
62.93 |
|
|
62 Series Marine Carbon Monoxide - Flush Mount - White - 12V with Trim Ring
Features:
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
NMMA Listed Component.
Space Saving design works in harsh marine environments.
Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
End of Life Signal alerts boater to replace the alarm after 5 years of service.
Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.
Specifications:
Conforms To ANSI / UL STD 2034*
* Testing Laboratory: ETL/Intertek
Alarm Point: 400 PPM 4-15 Minutes
Low voltage power warning at 7 Volts
Power Supply and Current Draw: 37 mA @ 13.8 VDC
Operational Range: 13.8 Volts +/-15%
Low voltage power warning at 7 Volts
Operating Temperature: -40°F to +158°F
Case Size: 4.5″W x 3.25″H x 1.25″D
|
62.93 |
|
|
Aluminum Mercury Zeus Pod Trim Tab Anode Kit with Hardware
Features:
Material: Aluminum
Hardware included
|
129.72 |
|
|
Trim Ring Snap Cover for VHF 210 & 215
Don't let a misplaced or broken cover blemish the beauty of your compatible VHF radio. Snap on this trim ring cover and restore your marine device.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
SR-L Series Marine 20" Black LED Lightbar - White Light with Red Halo
Accent lighting is an easy way to customize the look of any boat or vehicle, and RIGID now offers a way to add style and function with the SR-L Series Light Bar. This 20 inch Light Bar offers users the latest LED technology paired with advanced optics to provide an ultra-wide 70-degree beam pattern suitable for lighting up the trail ahead.
The halo provides a stylish accent color to any custom vehicle build, while the hidden mounting hardware and glossy outer trim further adds to the light bar’s sleek look. The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
A 3-position switch is included, allowing the user to easily switch between the halo accent lighting to the forward-projecting light.
The SR-L Marine Series Lightbar offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series Lightbar makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Wide beam with firm cutoff on lower edge for minimum reflection
Accent light can be used for low level ambient lighting
|
599.99 |
|
|
2" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0
READY FOR ANYTHING! This 2-inch marine LED scene spreader light is the perfect way to add lights to a vessel. The 2'' Single Row Scene Light throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when boating or fishing at night. Whether users are tying knots, catching fish, or cleaning the boat, they will have all the light that is needed.
With the flick of a switch, users can see that this vehicle work light is built with quality parts. From the moment users put the 2-inch LED light bar Single Row series in their hands, it becomes completely clear how this vehicle work light can take the beating Black Oak's claim it can. This small light bar comes complete with a wiring pigtail, stainless steel brackets, and hardware—everything needed to mount and get going!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Scene optics
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Deck or spreader lights
Trailer lighting
Rear bumper lights
Work lights
Mower lights
Golf cart lighting
Technical Specifications:
Total Wattage: 20W
Amp. Draw: 1.4
LED Quantity: 2
Weight: 0.7 lbs.
Raw Lumens: 1560
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Width x Height x Depth): 2.82" x 1.91" x 2.18”
In the Box:
2" marine spreader light
(1) Wiring pigtail with deutsch connector
All hardware, ready to install!
*Sold as an Individual
|
88.20 |
|
|
3.0 2" 850nm Infrared Marine Pod Light - Flood Optics - White Housing
Black Oak's Marine Series has now collided with Black Oak's Infrared LEDs! The 850nm infrared comes in a flood pattern and pairs great with Night Vision Goggles and Cameras. Offered with an IP69K rating, users can take these bad boys with them offshore with them or even throw them on a vehicle.
*Do not stare directly into IR lights.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
3W infrared LEDs
1.35A per light
High-throw spot or wide flood optics
IP69K rated - highest rating available
Extremely durable aluminum housing
Technical Specifications:
Nanometers: 850
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.8"
In the Box:
Infrared POD light
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install
*Sold as an Individual
|
130.50 |
|
|
4" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0
Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Scene optics
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader light (bow/stern)
Aft deck fishing lights
Foredeck lights
Overheard lighting (marine/non-marine use)
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 0.35 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Width x Height): 5" x 2.13" x 2.15”
In the Box:
Marine spreader light
(1) Wiring pigtail with 2-pin waterproof deutsch connector
Mounting hardware required to install
*Sold as an Individual
|
134.40 |
|