Ocean Flat Base - Size 60 Hatch With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features: Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance All sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit, and Transom) Specifications: Lower Frame: Flat base Acrylic Color: Smoke grey Hatch Weight: 8 kg /17.6 lb. Acrylic Window Thickness: 12mm / (1/2 in.) Length: 574 mm / 22 5/8 in. Width: 574 mm / 22 5/8 in. Height: 43 mm / (1-11/16 in.) Radii: 76 mm / 3 in. Hinge Width: 367 mm / (14-7/16 in.) Cut-Out Length (Flat/Flange): 502 mm / (19-3/4 in.) Cut-Out Width (Flat/Flange): 502 mm / (19-3/4 in.) Cut-Out Radii (Flat/Flange): 40 mm / (1-9/16 in.) *Sold as an Individual

Size 60 Ocean Hatch - Flange Base With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features: Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance All sizes suitable for CE Area 2 (Deck, Coach roof, Cockpit, and Transom) Technical Specifications: Support System - Friction Lever Color - Smoke Grey Window Thickness - .5" Weight - 17.6lbs Dimensions (L x W x H) - 22-5/8" x 22-5/8" x 1-11/16" Cut-Out Dimensions (L x W) - 19-15/16" x 19-15/16" *Sold as an Individual

Series 3 Flat Base/Alum Cheek/Delrin Sheave Delrin™ plain bearing sheave ensures smooth operation and high safe working load. Stainless Steel base distributes loads to a larger surface area. Specifications: Sheave Dia. 1-7/16" (37 mm) Max Line 7/16" (11 m) Length 2-7/8" (73 mm) Width 1-3/4" (44 mm) Height 3/4" (19 mm) Fasteners (4) #10- RH (5 mm) C/C 2-3/8" (60 mm) SWL 1000 lbs. (450 kg) Weight Alum. 2.5 oz. (71 g) 

Series 7 Flat Base/Aluminum Cheek/Delrin Sheave Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Dia. 2-3/8" (60 mm) Max. Line 1/2" (13 mm) Length 4-3/8" (111 mm) Width  2-3/4" (70 mm) Height 1" (25 mm) Fasteners (4) 1/4" RH (6 mm) C/C 3-5/8" (92 mm) C/C (wide end) 2" (51mm) C/C (narrow end) 1-9/16" SWL 2250 lbs. (1020 kg) Weight Alum. 9.6 oz. (272 g) 

AeroCone® Rain Collector with Flat Base The AeroCone rain collector reduces wind-induced errors by providing a more aerodynamic path around the collector. Its contours are designed to streamline the airflow and reduce flow distortions. The design improves rain data accuracy in high wind situations where the horizontal wind velocity can cause under reporting. The enhanced design features don't stop with the outer shape: the inside of the rain collector is equally well designed, keeping intact the carefully engineered interior walls that reduce splash out during high rain conditions. The debris screen locks into place, ensuring that it remains in place during high winds and heavy rainfall events.

RAM 11mm Flat Base with Double Socket Arm and Diamond Adaptor (U) The RAM-B-179U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. The RAM-B-252U, base for the RAM-B-179U, consists of a 1" diameter ball and 2.25" x 0.875 base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Series 5 Flat Base/Alum Cheek/Delrin Sheave Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 5.9 oz. (167g) Max. Line 7/16" (11mm)

Series 5 Flat Base Cheek Block - Stainless Steel Cheeks Series 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 - RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 6.9 oz. (196 g) Max Line 7/16" (11mm) 

52MM (2-1/16") OceanLink Battery Current Gauge (-60/+60 AMP) - White Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

52MM (2-1/16") OceanLink Battery Current Gauge - 60/+60 Amps - Black Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Cockpit Marine 85MM (3-3/8") Pitot Speedometer - 0 to 60 MPH - White Dial/Chrome Bezel VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.  As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio. Features: Works with all standard pitot style senders and 1/8"" tubing 12V Illumination Bulb Mounting Hardware Included 0 to 60 MPH Range *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Actuator Marine Hardware Pack High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine / Boat Hardware We offer a full selection of marine hardware, including anchor rollers, anodes, ski tows, vents, and more. If you have a boat and need hardware, you are in the right place. From chocks and cleats to shaft seals and steering wheels, you can count on us for your boat hardware needs. It can sometimes be difficult to find everything you need for your boat, especially all in one place, but our full service site gives you plenty of excellent options for all the hardware you will need for your boating excursion.   Bow & stern eyes, deck fills, deck plates, and engine mounts are all available here, along with gas springs, grab handles, and hatches. We also have a wide assortment of hinges, hooks & clamps, and latches so you can find just the right option for your boat. With oarlocks, rail fittings, rub rail, shaft couplers, and swim platforms, as well as a selection of rope & chain pipe, you can find the things you need the most. We also have a selection of marine lumber, including teak. By using teak lumber for your marine needs, you have a great wood look that will hold up to the elements, and you can get it right here with all your marine hardware.

White Trim Ring & Screen Kit Trim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim piece and a hinged (and detachable) flyscreen to keep mosquitoes and other pesky insects out of the boat. The hatch latches may be accessed easily thanks to the hinged screen. Features: White trim ring and screen kit for Lewmar hatch size 54 Can only be fitted to boats with a headliner The trim flange can be cut to length to suit a range of deck thicknesses up to 2-7/16 in. for low/medium profile hatches, and 2-13/16 in. for flanged ocean hatches Can't be used on flat base ocean hatches

Size 70 Flush 2G Deck Hatch Lewmar pioneered the high-volume flush hatch platform back in 2006, bringing what was then Superyacht styling into mainstream boat production.  The precision of the fit makes for a sleek, modern look and means no more stubbed toes for boat owners. Features: Clean aesthetics EPDM seal provide completely watertight structure Water drained effortlessly away by deck-moulded channels Strong, stylish handles and hinges Trimkit fits all standard sizes  Dark grey acrylic option keeps cabin cooler Technical Specifications: Support System - Stay x two (2) Color - Dark Sport Tint Dimensions (L x W x H) - 25.5" x 27.5" x 1.25" Cut-Out Dimensions (L x W) - 24.7" x 24.7" *Sold as an Individual