|
Panoptix™ PS70 Thru-Hull Transducer with Fairing Block
SEE FISH LIVE. CATCH FISH DEEP.
The Panoptix PS70 stainless steel thru-hull transducer is powered by Garmin RapidReturn™ sonar, which gives you live sonar views up to 1,000’ below the surface.
Live sonar up to 1,000'
Multiple sonar modes
Wide sonar beam
Image stabilization
Thru-hull mounting
800-watt power output
Garmin RapidReturn Sonar
This sonar sends multiple simultaneous pings through the water column. The result is live sonar capabilities up to 1,000’, giving deep-sea anglers a real-time view of what’s below the surface.
LiveVü™ Down Sonar
See real-time live sonar images up to 1,000’. With Garmin RapidReturn, anglers can see small baitfish and target game fish in real-time. The wide 120-degree beam angle covers huge areas of water.
Traditional Sonar
View crisp, clear fish arches with excellent separation of targets under the boat.
Triple-Beam Sonar
Get a 3-way traditional sonar split that gives sonar returns from the port and starboard directions and targets directly under the boat in an easy-to-understand traditional sonar view. Adjust the beam angles to fine-tune your 3 columns of sonar data.
RealVü™ 3D Sonar
Historical scanning technology helps find fish and build a map of the ocean floor while your boat is moving. It shows the entire water column you have passed over in 3D, from the bottom to the surface, and all fish in between. The True Motion 3D sonar returns feature now follows the vessel’s course over the ground.
Quickdraw Contours Feature
Survey areas of the ocean floor in great detail. New QuickDraw Contours feature improvement allows users to survey wide swaths of the ocean floor, even at depths up to 1,000’.
Live Sonar Display Rate
Panoptix PS70 will display at a minimum of 10 frames per second (6 to 8 times faster than the competition), which results in faster sonar returns.
Wide Sonar Beam
Locate bait and fish quickly with a wide 120-degree by 8-degree sonar beam, which covers more water columns at once.
Image Stabilization
An internal sensor will stabilize sonar returns, giving you a clear view even in rough waters.
Thru-Hull Installation
The stainless steel thru-hull transducer can be flush-mounted or pocket-mounted. A fairing block allows for deadrise angles of 0 to 20 degrees. The optional fairing block can survive high operating speeds and withstand the rough conditions found offshore.
High-Power Sonar
800-watt power output gives you stronger sonar penetration through the water.
In the Box:
PS70 down-looking thru-hull down transducer
Fairing block
Stainless steel thru-hull mounting hardware
Power cable
Network cable 40 ft (12 meters) with network adapter
Documentation
General
Dimension: 8.50" x 4.49" x 9.61"
Weight: 10.12 lbs
Waterproof: IPX7
Transducer Beamwidth: 120° x 8°
Transducer Cable Length: 8 ft + 40 ft Extension
Temperature Range: 0°C to 40°C
Electrical Features:
Power Input; 10-35v
Power Usage: 35w
Fuse: 7.5a
Sonar Features
Frequency: 190-210 kHz
Transmit Power: 800w
Maximum Depth: Saltwater 1000'
Sonar Type: Multi-beam phased array
Connections
Garmin Marine Network ports: 1 (small connector)
Sonar Modes
RealVü 3D Historic: Yes
3-Beam Traditional: Yes
Traditional Sonar Source: Yes
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
5499.99 |
|
|
B45-DT-HB 600W Thru-Hull Transducer w/Fairing Block & Humminbird #9 Connector
The B45 is our smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape and High Performance fairing block deflects aerated water from the transducer's face for strong return echoes and clear display images.
Features:
Bronze housing
Depth and Temperature
Recommended for planing-hull powerboats and cruising sailboats up to 9 m (30’)
Good sensitivity in a compact housing
Fast-response water-temperature sensor provides ±0.2°C (±0.1°F)
High-Performance Fairing included
Usable Shaft Length: 92 mm (3.62”)
Standard fairing block
Frequency: 50/200 kHz
Maximum Depth Range:
50 kHz—235 m to 353 m (800’ to 1,200’)
200 kHz—118 m to 206 m (400’ to 700’)
Cone: 50 kHz—45°, 200 kHz—12°
RMS Power: 600 W
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
SI-TEX 496/50/200ST Bronze Thru-Hull Transducer w/ Fairing Block f/ ES502
Dual Frequency 50/200 kHz
Max Power: 500W
Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: ES502
|
252.00 |
|
|
CPT-70 Plastic Thru Hull Transducer
Urethane Through Hull Transducer with Fairing Block. The CPT-70 requires A80332 Adapter Cable (if you have a green locking collar on the unit.)
Features
Plastic Thru Hull
Max Depth: DV=600ft/FF=900ft
Beam Width: 25°/60°
Depth and Temperature
Cable Length: 33ft/10M
Deadrise: 0-25°
|
291.47 |
|
|
B265LH Bronze Chirp Thru Hull 1kW with Fairing Block
Requires Mix and Match Cable
Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology.
Features:
Depth & fast-response water-temperature sensor
Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° port-starboard beamwidth
High—CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth
103 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Bronze transducer housing with High-Performance Fairing
Boat Size: 8 m (25’) and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1638.76 |
|
|
R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No Connector
Get more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25-degree beam for all frequencies, which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high-wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
Features:
Depth and fast-response water-temperature sensing
2 kW of power for excellent deep-water performance from the low-frequency
2 kW low frequency (38 to 75 kHz): 19 to 10-degree port-starboard beamwidth; 10 to 5-degree fore-aft beamwidth
Maximum depth of 1829 m (6000')
1kW high frequency (150 to 250 kHz): 25-degree constant beamwidth; Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing with fairing for optimal performance
No Connector - Bare Wire
Comes with Fairing Block
Patented Xducer ID® technology
Specifications:
Acoustic Window: Epoxy/urethane
Common Use: Fishing, commercial fishing
Functions: Depth, temperature
High Frequency: 150-250 kHz
High-Wide Beamwidth: 25 degrees
Housing: Urethane
Hull Material: Compatible with all hull materials
Low-Frequency: 38-75 kHz
Low-Frequency Beamwidth: 19-10 degrees
Max Deadrise: Up to 22 degrees
Max Deadrise Angle: 22 degrees
Max Depth: Low frequency- 1829 m (6000'), High wide frequency- 152 m (500')
Max Vessel LOA: 9 m (30') and above
Mounting Style: Thru-hull
Power Rating: 2 kW
Retractable housing: No
Single or Dual Frequency: CHIRP-ready dual-band
Tilted Element: No
Weight: 15.1 kg (33.3 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3383.02 |
|
|
556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin
The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.
Standard Features
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
10-Pin Connector
High Speed Fairing Block included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
RV-300 Plastic All-In-One 0° Thru-Hull Transducer
Raymarine’s RV-300 Plastic All-In-One Thru-Hull Transducer is designed for inboard and outboard powerboats. The RV-300 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. For a deadrise of 0-5 degrees.
The RV-300 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer also has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering. The RV-300 also has a built-in fast response water temperature sensor for quick, accurate readings.
The RV-300 features a rugged plastic through hull body suitable for fiberglass, steel or aluminum hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-300 works great on trailered boats too and with no fairing block to cut, installation is a breeze.
What’s in the Box?
RV-300 Plastic All-In-One Through Hull Transducer with 8M(26')
Anti-rotation bolt kit
Installation instructions
|
1039.99 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12º
The bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5mm (3/16") extending outside of the hull.
Features:
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Arrow on cap points toward keel when installed
Built-in temperature sensor
Boat Size: Up to 8M (25')
Bronze transducer housing
Specifications:
Weight: 1.4 kg (3 lb)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|