GC™ 200 Marine IP Camera Enjoy added security and awareness on your vessel Use to monitor 1 or multiple areas above and below deck in clear, real-time HD video HD resolution for excellent quality images, even in low light Stream video from up to 4 cameras at a time on a single compatible Garmin chartplotter Use reverse-image setting on compatible chartplotters to help back out of tight locations such as crowded marinas Connect and share video across multiple compatible chartplotters on the Garmin Marine Network The GC 200 marine IP camera provides added security and awareness on your vessel. Use multiple cameras to monitor areas above and below deck in clear, real-time HD video. Stream video from up to 4 cameras at a time on a single chartplotter, or share video across multiple compatible chartplotters on the Garmin Marine Network. Use the reverse-image setting on compatible chartplotters to help back out of tight locations such as crowded marinas. Install Nearly Anywhere GC 200 is easy to install, and its small size and discreet design will blend into the surroundings. Mount the marine IP camera in virtually any orientation, because its images can rotate 90/180/270 degrees. Its rugged, water-resistant case allows you to place it nearly anywhere you need a camera. In The Box: GC 200 marine IP camera 6 meter Garmin Marine Network cable (small connector) Garmin Marine Network adapter cable (small connector to large connector) Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

GC™ 100 Wireless Camera Wirelessly Stream Video to Your Chartplotter Features: Compact marine camera helps you monitor areas inside and around your boat Wirelessly connect to your compatible chartplotter for high-quality images shown right on your display Video is available for viewing on any other chartplotter on same network Effective in total darkness; perfect for the engine room Easy to install and hardwired for power with one-button setup For added security and practical awareness above and below deck and around your boat, the GC 100 marine camera provides an easy solution. This compact camera wirelessly streams high-quality video to display directly on your compatible chartplotter and any other chartplotter on the same network. You can pair up to 7 cameras with your chartplotter, and view content from up to 4 cameras simultaneously. Install Nearly Anywhere GC 100 is effective in total darkness, making it perfect for the engine room. Easy to install and hardwired for power, the camera is ready to use with one-button setup. The durable, compact design of the camera, weatherproof housing and its secure mounting bracket provide flexible options for placement nearly anywhere on your boat. Specifications: Wi-Fi®: Built-in Wi-Fi Camera connection: Wi-Fi connection Power: Hardwired (10-30 Vdc) Images: standard and reverse Night vision: Built-in IR LED illumination (940 nm) Night vision distance: Up to 3 meters Viewing angle: 183° (diag) / 160° (horiz) / 90° (vert) Image sensor device: 1/4 in (4.5mm) high-sensitivity CMOS Effective pixels: 1280 x 720 (720p HD) Scanning system: Rolling shutter Resolution: 1280 x 720 (720p HD) Video output: H.264 stream over Wi-Fi Operating temperature: -20°C to +60°C Infared spectrum: 940 nm Gain correction: Auto White balance: Auto Electronic shutter: Auto Back light compensation: Auto Day/night operation: RGB mode full-time Waterproof rating: IPX7 What's In The Box? GC 100 wireless camera  Protective case  Screw-down mount with mounting hardware  10 meter IPX7 power cable  Manual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

M364C Stabilized Thermal IP Camera PREMIUM MULTISPECTRAL MARINE CAMERAS WITH ACTIVE GYRO-STABILIZATION Featuring a high-definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C provides an elite level of awareness on the water. This camera uses multispectral imaging to deliver exclusive FLIR Color Thermal Vision™(CTV)  technology when used with Raymarine Axiom™ MFDs. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance and enhanced gyro-stabilization make the M364C indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.  ELITE AWARENESS WITH MULTISPECTRAL IMAGING Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX® FLIR Boson 640 × 512 thermal sensor Thermal imaging detects objects in complete darkness, glare, and light fog Integrate the M364C with Raymarine Axiom and take advantage of FLIR Color Thermal Vision and MSX multispectral imaging Color Thermal Vision blends thermal and the low light visible camera so captains can easily identify color details like navigational lights and navigation aids HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M364C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology  A STEADY VIEW IN ROUGH SEAS Steady, stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Horizontal stabilization automatically keeps the camera positioned in the same direction as the vessel turns Integrated AHRS (Attitude Heading Reference Sensor) Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M364C LR Stabilzed Thermal/Visible Long Range IP Camera PREMIUM MULTISPECTRAL MARINE CAMERAS WITH ACTIVE GYRO-STABILIZATION Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C provide an elite level of awareness on the water. This camera use multispectral imaging to deliver exclusive FLIR Color Thermal Vision™(CTV)  technology when used with Raymarine Axiom™ MFDs. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance and enhanced gyro-stabilization make the M364C indispensable tools for law enforcement   professionals, commercial mariners, and serious recreational boaters.  ELITE AWARENESS WITH MULTISPECTRAL IMAGING Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX® FLIR Boson 640 × 512 thermal sensor Thermal imaging detects objects in complete darkness, glare, and light fog Integrate the M364C with Raymarine Axiom and take advantage of FLIR Color Thermal Vision and MSX multispectral imaging Color Thermal Vision blends thermal and the low light visible camera so captains can easily identify color details like navigational lights and navigation aids HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M364C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology  A STEADY VIEW IN ROUGH SEAS Steady, stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Horizontal stabilization automatically keeps the camera positioned in the same direction as the vessel turns Integrated AHRS (Attitude Heading Reference Sensor) Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

IP Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 32 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. IRIS Control HTML5 App Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more. Features: 1 terabyte hard disc drive This is an IP camera only version that can connect up to 32 cameras Wired for a Garmin unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin onehelm™ integration with the IrisControlTM app Control and switch your cameras from your Garmin MFD. Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Full-screen touch control with Garmin’s USB touch (on available models) Firmware is upgradable to unlock features as & when they become available

Hybrid Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 8 Analogue & 4 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App. Multiple Camera Formats Hybrid models accept analogue, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. IRIS Control HTML5 App Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more.  Features: 1 terabyte hard disc drive This hybrid version can connect 4 IP cameras and 8 analog cameras  Wired for a Garmin unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin onehelm™ integration with the IrisControlTM app Control and switch your cameras from your Garmin MFD. Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Full-screen touch control with Garmin’s USB touch (on available models) Firmware is upgradable to unlock features as & when they become available

M364 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M364 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 640 x 512 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

CAM300 Mini Day & Night Eyeball IP Camera The CAM300 mini day/night IP camera is a wide field-of-view visible camera designed for Raymarine Axiom chartplotters. Equipped with an HD video sensor, the CAM300 transforms Axiom into a powerful onboard video observation system. Use the CAM300 to monitor blind spots, check in on the crew, or watch and record all fishing action from the helm. Combine the CAM300 with the Raymarine AR200 sensor and make smarter navigation decisions using ClearCruise augmented reality to overlay AIS targets, waypoints, and chart objects on the Axiom video display. Features: Crystal clear HD video imagery using a 3MP CMOS sensor View up to 4 CAM300 video streams simultaneously on single Axiom display Built-in infrared emitters for excellent near-field low-light visibility up to 33 ft (10 meters) Image flip and invert functions for ball-up/ball-down installation and reverse video. Flexible mounting solutions as the entire camera ball rotates in the housing Easy to install with either a direct 12-volt connection or single cable Power over Ethernet (POE) Rugged IP66 enclosure for below and above-deck marine installations Navigate smarter with ClearCruise™ augmented reality and the optional AR200 sensor

Control for Garmin OneHelm Host Interface (No Recording) / IP Cameras Manage and control your onboard cameras and alarms via the new Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. IrisControl is the only app of its type in the world, developed especially for boat owners, operators, and crew, and has been designed to run on chartplotter HTML5 platforms such as Garmin’s award-winning OneHelm program. IrisControl is hosted on the CMAC range of onboard management and recording units and interface modules. Features: For IP Cameras Fully Integrated Camera and Alarm Control & Management Interface Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin OneHelm™ Integration Control and switch your cameras Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Firmware is upgradeable to unlock new features as & when they become available

M332 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 320x256 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M300C Stabilzed Visible IP Camera Combining  a  high-performance  visible  marine  camera  with  long-range optical zoom capability, the M300C offers positive target  identification  for  law  enforcement,  commercial, and  recreational applications. Advanced gyro-stabilization provides steady imaging in rough sea conditions and allows the M300C to monitor targets or hazards over long distances continuously.  Exceptional low light performance from the M300C gives captains enhanced awareness once the sun dips below the horizon.  HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M300C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology A STEADY VIEW IN ROUGH SEAS  Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Electronic stabilization minimizes low frequency rumble and vibration Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems.  Optional joystick control unit and integration with multifunction navigation displays (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream and HD-SDI lossless digital video interface Composite analog video (SD) for integration into legacy displays Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

Hybrid Camera Recorder - No IrisControl - 1TB HDD - 8 Analogue & 4 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms.  Multiple Camera Formats Hybrid models accept analog, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more. Features: 1 terabyte hard disc drive This hybrid version can connect 4 IP cameras and 8 analog cameras  Wired for a basic unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Control and switch your cameras Configure your boat alarm system, control individual and group alarms Firmware is upgradable to unlock features as & when they become available

AR200 IP Camera Stabilization Module The AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor. The AR200 provides position, heading, pitch and roll data to compatible Axiom MFDs. When combined with a compatible IP camera the AR200 enables use of the ClearCruise™ Augmented Reality features available on your Axiom MFD.” Features: 9-axis AHRS (attitude and heading reference system) sensor 28-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support When combined with a compatible IP camera the AR200 enables the use of ClearCruise Augmented reality features available on Axiom multifunction displays NMEA 2000 compliant IPX6 / IPX7 waterproof rating In the Box: Mounting trim (top) Small sealing ring AR200 x3 large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9x22 C Z A4 Stainless steel) Mounting tray (bottom) x4 small surface mount fixings (pan head pozi DIN7981-ST 2.9x13 C Z A4 Stainless steel) Bulkhead (wall) bracket Large sealing ring Documentation 6m (19.7ft) SeaTalkNG white cable

IP Cam-1 Stainless Steel POE IP Camera IP CAM-1 stainless steel marine video camera, which comes preconfigured for compatible B & G and Simrad multifunction displays. Lowrance® compatibility will be introduced with the 20.3 software release.  This easy-to-install marine camera, with rugged 316 stainless steel housing, offers improved vessel awareness and peace of mind that comes with monitoring a location on or around your boat – day or night. Improved Vessel Awareness Keep an eye on locations onboard or in close proximity to your boat with the IP CAM-1. Mount the camera in a rear-facing position for use as a reverse camera or install it facing forward, for a better view ahead of your boat. High-performance IR LEDs keep the camera fully functional at night or in dark areas. Rugged Construction The rugged 316 Stainless steel housing is designed to withstand the harshest marine environments, making it the perfect solution for any mounting locations exposed to the elements.  Simple Setup The IP CAM-1 comes preconfigured for compatible multifunction displays* and can be powered via Power Over Ethernet (POE) or 12V power supply. Add multiple cameras to your boat’s network and cycle through each camera view on a compatible display. Features: Simple set up with compatible B & G Zeus3 and Zeus3S Multifunction and Glass Helm Displays, Simrad NSS evo3, NSSevo3S™, NSO evo3, and NSOevo3S™ multifunction displays, and the Lowrance HDS LIVE chartplotter/fishfinder* Rugged 316 stainless steel construction designed to withstand saltwater environments 1920 x 1080 Resolution with select multifunction display models Nighttime and dark area operation high-performance IR LEDs (10m range) 1.8mm wide-angle lens Power Over Ethernet (POE) or 12V supply options *Lowrance compatibility will be introduced with the 20.3 software release.