Firefly® PRO SOLAS  When it comes to saving lives, anything less than the best is not an option.  The all-new Firefly® PRO SOLAS rescue strobe lights are the brightest and most feature-packed strobe lights on the market today.  With three (3) activation functions, toggle between the ultra-bright strobe, the SOS strobe or the Steady-On feature to visually alert Search and Rescue of your location. The innovative new wide light emission LEDs produces a 360° beam of light (41 candela) allowing for visibility of over 3 miles.  The Cool White light has no yellow tinting which allows for a more visible light beam that can be seen at greater distances.  With an energy efficient microprocessor and redesigned electronics, the Firefly® PRO boasts maximum operation life in the harshest of conditions.   With a single set of AA Lithium batteries, the Firefly® PRO SOLAS will continuously strobe for over 56 hours or use the Steady-On feature for 28 hours of usage. This exceeds USCG and SOLAS requirements by over 48 hours. The new compact size will easily fit inside an inflatable life jacket or pocket for comfortable wear-ability.  The military spec casing is rugged enough to withstand years of abuse and the harshest environments.  The two lashing loops and included Velcro strap make mounting the Firefly® PRO SOLAS to your life jacket, belt or pack extremely easy so that the strobe light can be readily accessible the moment you need it.  Certifications: U.S.C.G. SOLAS MED CE Transport Canada  Technical Specifications: Dimensions (H x W X D) - 4.4" x 2.2" x 1.2" (11.7 x 5.7 x 2.8 cm) Weight - 2.39 oz (68 g)  Battery - AA Alkaline x two (2)  Operation - Manual  Waterproof - IP67  Lamp -  Cool White LED Strobe Intensity - 41 Candela (Strobe) Strobe Visibility - ≥ 3 miles Strobe Flash Rate -60 P/M  Strobe Operation - 56 hours  In the Box: Firefly PRO SOLAS light Instruction manual *Sold as an Individual 

FireFly® PRO WATERBUG SOLAS The Firefly® PRO WATERBUG is a SOLAS-approved strobe light with a built-in water activation feature that will automatically activate once submerged.   With four (4) activation functions, toggle between the armed mode for automatic water activation, ultra-bright strobe light, SOS strobe or the Steady-On feature feature to visually alert Search and Rescue of your location.  The innovative new wide light emission LEDs produces a 360° beam of light (41 candela) allowing for visibility of over 3 miles.  The Cool White light has no yellow tinting which allows for a more visible light beam that can be seen at greater distances.  With an energy efficient microprocessor and redesigned electronics, the Firefly® PRO WATERBUG SOLAS boasts maximum operation life in the harshest of conditions.   With a single set of AA Lithium batteries, the Firefly® PRO WATERBUG SOLAS will continuously strobe for over 56 hours or use the Steady-On feature for 28 hours of usage. This exceeds USCG and SOLAS requirements by over 48 hours. The new compact size will easily fit inside an inflatable life jacket or pocket for comfortable wear-ability.  The military spec casing is rugged enough to withstand years of abuse and the harshest environments.  The two lashing loops and included Velcro strap make mounting the Firefly® PRO WATERBUG SOLAS to your life jacket, belt or pack extremely easy so that the strobe light can be readily accessible the moment you need it.  Certifications: U.S.C.G. SOLAS MED CE Transport Canada  Technical Specifications: Dimensions (H x W X D) - 4.4" x 2.2" x 1.2" (11.7 x 5.7 x 2.8 cm) Weight - 2.39 oz (68 g)  Battery - AA Alkaline x two (2)  Operation - Automatic and manual  Waterproof - IP67  Lamp -  Cool White LED Strobe Intensity - 41 Candela (Strobe) Strobe Visibility - ≥ 3 miles Strobe Flash Rate -60 P/M  Strobe Operation - 56 hours  In the Box: Firefly® PRO WATERBUG SOLAS light Instruction manual *Sold as an Individual 

Marine Safety It can be very enjoyable to be out on the water, but you do not want to forget about marine safety. Making sure you protect yourself as much as possible matters, and you also want to keep all of your boat's passengers safe, too. We have the accessories you need to raise your level of safety and increase your peace of mind anytime you take the boat out of the dock. Our options for personal locator beacons and safety lights can help protect you, and our waterproof bags & cases help you make sure you do not damage any of your personal belongings, either.   Make sure you remember to take an emergency weather radio, and we offer EPIRBs, Flotation Coats/Pants, Fume Detectors, Immersion/Dry/Work Suits, Life Rafts, Man Overboard Devices, Personal Flotation Devices, Personal Locator Beacons, Safety Lights, and Waterproof Bags & Cases and Medical Kits to protect yourself and the people you care about . Your passengers will thank you when they feel safe on your boat, and you will have less to worry about. Then you can have more fun out on the waterways, and really appreciate the beauty of nature and all the fun a boat can bring.

The joys of on-the-water paddle sports are many. Paddling your own canoe, kayak, paddleboard, or  surfboard takes individual skill, where you set your own pace and experience a sense of calm and quiet serenity as you glide across the pristine waters. You will encounter fewer & wild parties with large, raft-up boat flotillas crowding the waterways. Stand Up Paddle Boarding Stand-up paddleboarding originated in Hawaii, and while it is a recent addition to the list of paddle sports, some believe that it has been around for longer. Experts say it has existed for decades but came to prominence in the 2000s, evolving into the recognized sport today. Its earliest roots trace it back to the 18th century when native Hawaiians paddled along the Pacific from island to island. The modern applications of stand-up paddle boarding, or SUP as some call it, emerged in the mid-20th century with the extreme popularity of surf culture in the 1960s. The shores of California first welcomed SUP in 2005, where it caught on instantly among the locals. Today, SUP has spread across the country, with more than 22 million Americans participating in stand-up paddleboarding.   Simply put, stand-up paddleboarding involves getting on a surf-like board with a long SUP paddle which you will use to propel the board while standing up straight. This paddle sport is excellent for photographers as they can get a much better view while standing up. There is more than one way on how to paddle a stand-up paddleboard. You can race, tour, and surf. Many marinas have partnered with yoga instructors to offer on-the-water stand-up paddleboard yoga classes. It is refreshing to watch a class of yogis as they attempt perfect balance in a headstand on an unanchored, less than steady paddleboard! You can even turn your SUP into a kayak. More recent is white water paddle boarding for the thrill-seekers. Kayaking may have been the fastest-growing paddle sport, but stand-up paddleboarding has taken over this title. New variations of stand-up paddleboards have hit the market. Some boards are inflatable, some can be folded up into thirds with hinged sections, and newer paddleboards include tall seats and pedals. For SUP equipment information, click this link at CLR Marine. https://www.clrmarine.com/462m4/paddlesports.html.   SAFETY FIRST and WEATHER ALERTS WHEN PADDLE BOARDING While enjoying any paddle sport, such as paddle boarding, canoeing, or kayaking, be aware that weather can change in an instant. A calm stream can suddenly become a raging river if weather conditions suddenly change higher up at the stream's headwaters.    PERSONAL FLOTATION DEVICE (PFD) Wearing or carrying a PFD on-board is essential to paddleboard safety. Stand-up Paddleboards are considered "vessels" under the United States Coast Guard regulations when used out of designated swimming, surfing, or bathing areas. Individuals 13 years of age and older must have a PFD on board, and those 12 years of age and younger are required to wear a PFD at all times on the water. Not only can a PFD save your life, but it can also make it easier for you to climb back aboard after falling or jumping in the water. https://www.clrmarine.com/462m4/marine-safety/personal-flotation-devices.html   WHISTLE A whistle can be a simple, inexpensive item to carry that can make a huge difference in an emergency. You can use a whistle to alert motorized boats to your presence if needed or to get help from the shore if you have trouble on the water. A whistle can also be heard in the fog when visibility is at a minimum. https://www.clrmarine.com/m4/10020--acr-survival-res-q-whistle-w-18-lanyard.html   PERSONAL LOCATOR BEACON Personal locator beacons are handheld devices that signal 406 MHz, the same frequency used for newer emergency locator transmitters. Activate a PLB—in most cases, simply by extending the antenna and pressing the On button—and it transmits a powerful distress signal with a unique digital code. https://www.clrmarine.com/462m4/paddlesports/personal-locator-beacons.html   LEASH If you fall off your SUP while in the water, the leash will keep your board easily accessible. Wind, currents, and waves can quickly sweep your SUP away from you. Fasten the cord securely & around your ankle.   WETSUIT If you plan on going out on cold water, you should consider a suit to keep you warm. Hypothermia escalates rapidly. An accidental fall into a cold mountain lake or cold ocean water would ruin your trip. Remember that you won't have a stack of warm blankets or warm, dry clothing with you.   HELMET If you're going to take your SUP down a river, you should consider a helmet for the trip. Kayakers wear them, and their heads are much closer to the water than someone standing on a paddleboard. Falling onto hidden or exposed rocks from a standing position could cause a devastating impact. Protect your brain. Wear a helmet.   WEATHER Always be aware of the current weather conditions for your SUP outing and pay attention to the forecast for the day. Weather conditions can change rapidly in some locations, and getting caught in bad weather can be very dangerous. The wind is always a threat. The wind can quickly unbalance a paddle boarder, make it difficult to paddle, or even carry the board quickly away from a dismounted paddler. Have a weather app on your phone, and hopefully a signal will transmit while you are on the water. PADDLE with a PARTNER The best way to enjoy your SUP is with a friend. It is also one of the best ways to stay safe on the water. Paddling buddies can double-check gear before heading out and watch out for each other while out on the water. Let friends know where you will be. Leave your itinerary with someone on land. If you don't return at your designated time, your land buddy will start the search. Should your itinerary change, get in touch with your person on shore. Cell service may be limited on the water. Don't count on your cell phone to be your lifeline.   SUNSCREEN The sun is known to cause cancer in all states, not just California. Protect any exposed skin.    KNOW YOUR LIMITS Remember that you have that same distance on your return trip for every mile that you have traveled out. While the wind may be at your back on the way out, a headwind at the return will be a challenge as your energy is diminishing. Paddleboarding is an excellent way for you to blend in with your surroundings and slide from one area to another. Be safe. Know the distance to your destination or how much exertion you want to make at each outing. In addition, to stand-up paddleboarding, other paddle sports to enjoy are kayaking, surfing, and canoeing. We will explore these paddle sports in a future blog. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/. ____________________________________________________________________________________________________________________    Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.

The wait is over. Ocean Signal is proud to bring the next generation float-free Emergency Position-Indicating Radio Beacon (EPIRB). The SafeSea EPIRB1 Pro is now fully approved and pairs its compact stature with a rugged design, making it a practical option to meet the needs of all commercial, workboat, and leisure vessels.   The SafeSea EPIRB1 Pro operates in the 406MHz satellite band. This band comprises the international distress frequencies that are constantly monitored by Cospas-Sarsat, the international search and rescue satellite operator, ensuring a rapid response when a signal is received, no matter where it is in the world.   As the world's most compact Emergency Position Indicating Radio Beacon or EPIRB, the EPIRB1 Pro pairs its compact stature with a durable design, making it a practical option to meet the needs of all commercial, fishing, and leisure vessels. The product has been designed for maximum efficiency and boasts a 10 year battery life in addition to superb operating life when activated, keeping rescue services updated with your location for longer.     Key Features:   Smallest Auto-Deploy (Float-Free) Bracket Complies with MED/IMO New SafeSea Antenna Design 10-Year Battery Life Global Coverage via 406 MHz Homing Beacon (121.5 MHz) Fast 66 Channel GPS Receiver High Intensity Strobe Mounting Plate for Easy Installation   SHOP: https://www.clrmarine.com/m4/85035--ocean-signal-epirb1-pro-cat-1-epirb.html     Specials    Closeouts    Remanufactured    Rebates  

Raymarine has identified a problem with Sport Drive autopilot drive unit. As a result the mechanical clutch assembly may fail, causing the steering of the vessel to lock in one direction with possible risk to the safety of the vessel and crew. See PDF for more information.

Did you Know CLR Marine can get your ACR EPIRB & PLBs batteries replaced and programed through our ACR Authorized Distributor.    ACR EPIRB batteries should be replaced every 5 years to ensure proper functioning when needed. Turnaround time for EPIRB services averages three days from receipt when all components are in stock.   Battery replacement service for PLBs includes a full physical integrity check, pressure test, data transmission test, replacement of seal and o-rings, installation of the new battery, and disposal of the old battery.   SAVE more money.  Not only is ACR running a Sale but they are also offering Rebates.  To get all you can from your ACR purchase see our Rebate Corner for even more savings.

SailPod Precut for Raymarine Axiom PRO 16 for 9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips… “Where you need it, when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SailPod Pre-Cut for Raymarine AXIOM PRO 16 for 12″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

GlobalFix™ V5 Cat 1 GPS AIS EPIRB with Return Link Service & Mobile App The ACR GlobalFix V5 EPIRB combines 406 MHz satellite connectivity with Automatic Identification System (AIS) functionality. This means that when the EPIRB is activated not only does it transmit your emergency signal to the global Cospas Sarsat satellite rescue system, but it broadcasts an AIS safety message on VHF-frequencies that can be seen immediately by any AIS-equipped vessel nearby. Other great features include Return Link Service (RLS) technology that provides visual confirmation to the user that their distress message has been received, a 121.5 MHz homing signal, and visible and infrared strobe lights for easy target identification at night or in poor visibility. Another feature is Near Field Communication (NFC) which allows users to monitor their EPIRB using a smartphone App. ACR is the global leader in marine safety and rescue technology and the GlobalFix V5 GPS EPIRB with AIS combines the durability and reliability they are known for with advanced technology designed to speed rescue response time.   Faster Rescues through the Pairing of Global and Local Rescue The ACR GlobalFix V5 EPIRB accurately derives its position anywhere in the world using GNSS (GPS, Galileo, Glonass) positioning networks. Upon activation 406 MHz distress transmissions relay the GPS EPIRB (GPIRB) position, accurate to within 100 meters, to the worldwide Cospas Sarsat search and rescue satellite network. EPIRB identifiers and position information is relayed to ground stations through the satellite system initiating rescue operations. With advanced AIS technology now incorporated into the EPIRB, once activated an AIS signal is transmitted so that nearby vessels outfitted with an AIS transponder are instantly notified of the EPIRB location. AIS-equipped vessels within the VHF range of the EPIRB will see a safety message on their screens including MMSI vessel identification. Vessels in the area where the EPIRB has been activated can then start rescue and recovery operations immediately without having to wait for an emergency response from the applicable SAR authority. AIS also allows local responders to easily pinpoint the EPIRB’s location which is presented as an AIS target on their onboard display. Nearby vessels with onboard AIS can navigate directly to the EPIRB by selecting the AIS target. This incredible technological advancement will speed recovery times which is sure to save lives. Smartphone Connectivity utilizing Near Field Communication (NFC) NFC (Near Field Communication) technology allows users to access EPIRB diagnostics using their smartphones. When a smartphone is placed adjacent to the GlobalFix V5 EPIRB the ACR Product App automatically opens providing access to EPIRB data. Beacon status information in the app includes current battery life, number of self-tests completed, number of GNSS tests completed, and the amount of time the EPIRB has been activated. Detailed information on each self-test and GNSS test performed by the device is also available. GNSS tests show a map view pinpointing where the previous test was performed, the date and time of the test, how long it took the EPIRB to get a fix on the GNSS coordinates, the number of satellites used to obtain that fix, and the accuracy of the fix. Easy App connectivity with NFC allows users to easily check the status of all EPIRB functions to ensure it is working properly. Return Link Service (RLS) Return Link Service tells whoever triggers the EPIRB that the distress message has been delivered. An RLS signal sent back through the Galileo satellite network confirms that the distress message along with the precise beacon location and identifiers have been detected. An easy-to-see flashing blue light indicates the EPIRB’s successful reception of the Return Link message from the Galileo satellite network. The comfort of knowing rescuers are aware that an EPIRB has been activated and that they have its location helps reduce the stress associated with mayday situations. ACR specializes in electronic rescue devices and other life-saving products designed for both professional and recreational mariners. With the addition of AIS, the innovative ACR GlobalFix V5 EPIRB provides the easiest and quickest path to rescue. Return Link Service provides a welcomed sense of security knowing that your distress message has been received and Near Field Communication provides access to data and product functionality that has never before been available to any EPIRB customer. The advanced feature set of the GlobalFix V5 EPIRB makes it perfect for mariners whether coastal cruising, working offshore, or crossing oceans. Specifications: Output Power (406/121.5): 406.040 MHz, 5W (nominal) / 121.5 MHz, 50mW (nominal) AIS: Yes, AIS Alerts for Local Rescue Return Link Service: Yes, Enabled RLS confirmation direct to beacon NFC/Mobile App: Yes, Near Field Communication (NFC) and Mobile App Included Strobe: White & Infrared Dual Technology Size (antenna up) – Beacon Only: 18.5” x 4.3” x 4.36” (470 mm x 109 mm x 111 mm) Weight – Beacon Only: 1.78 lbs (810 G) Battery: Lithium battery, Li/FeS2 Battery Replacement: 10-year replaceable battery (replace 10 years after the date of manufacture or after activation) GPS: 72 Channel Multi-constellation receiver (GPS, Galileo, & Glonass GNSS) Activation: Out of bracket and wet, or manually in or out of the bracket Waterproof: 33 ft (10 m) for 5 min. Buoyant: Yes Operational Life: 48 hours minimum @ -4°F (-20°C) Deployment: Category I – Hydrostatic Release (auto deploy) Warranty: 5 years Approvals: Cospas-Sarsat/FCC/MED/MER Approved This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GlobalFix™ V5 Cat 2 GPS AIS EPIRB with Return Link Service & Mobile App The ACR GlobalFix V5 EPIRB combines 406 MHz satellite connectivity with Automatic Identification System (AIS) functionality. This means that when the EPIRB is activated not only does it transmit your emergency signal to the global Cospas Sarsat satellite rescue system, but it broadcasts an AIS safety message on VHF-frequencies that can be seen immediately by any AIS-equipped vessel nearby. Other great features include Return Link Service (RLS) technology that provides visual confirmation to the user that their distress message has been received, a 121.5 MHz homing signal, and visible and infrared strobe lights for easy target identification at night or in poor visibility. Another feature is Near Field Communication (NFC) which allows users to monitor their EPIRB using a smartphone App. ACR is the global leader in marine safety and rescue technology and the GlobalFix V5 GPS EPIRB with AIS combines the durability and reliability they are known for with advanced technology designed to speed rescue response time.   Faster Rescues through the Pairing of Global and Local Rescue The ACR GlobalFix V5 EPIRB accurately derives its position anywhere in the world using GNSS (GPS, Galileo, Glonass) positioning networks. Upon activation 406 MHz distress transmissions relay the GPS EPIRB (GPIRB) position, accurate to within 100 meters, to the worldwide Cospas Sarsat search and rescue satellite network. EPIRB identifiers and position information is relayed to ground stations through the satellite system initiating rescue operations. With advanced AIS technology now incorporated into the EPIRB, once activated an AIS signal is transmitted so that nearby vessels outfitted with an AIS transponder are instantly notified of the EPIRB location. AIS-equipped vessels within the VHF range of the EPIRB will see a safety message on their screens including MMSI vessel identification. Vessels in the area where the EPIRB has been activated can then start rescue and recovery operations immediately without having to wait for an emergency response from the applicable SAR authority. AIS also allows local responders to easily pinpoint the EPIRB’s location which is presented as an AIS target on their onboard display. Nearby vessels with onboard AIS can navigate directly to the EPIRB by selecting the AIS target. This incredible technological advancement will speed recovery times which is sure to save lives. Smartphone Connectivity utilizing Near Field Communication (NFC) NFC (Near Field Communication) technology allows users to access EPIRB diagnostics using their smartphones. When a smartphone is placed adjacent to the GlobalFix V5 EPIRB the ACR Product App automatically opens providing access to EPIRB data. Beacon status information in the app includes current battery life, number of self-tests completed, number of GNSS tests completed, and the amount of time the EPIRB has been activated. Detailed information on each self-test and GNSS test performed by the device is also available. GNSS tests show a map view pinpointing where the previous test was performed, the date and time of the test, how long it took the EPIRB to get a fix on the GNSS coordinates, the number of satellites used to obtain that fix, and the accuracy of the fix. Easy App connectivity with NFC allows users to easily check the status of all EPIRB functions to ensure it is working properly. Return Link Service (RLS) Return Link Service tells whoever triggers the EPIRB that the distress message has been delivered. An RLS signal sent back through the Galileo satellite network confirms that the distress message along with the precise beacon location and identifiers have been detected. An easy-to-see flashing blue light indicates the EPIRB’s successful reception of the Return Link message from the Galileo satellite network. The comfort of knowing rescuers are aware that an EPIRB has been activated and that they have its location helps reduce the stress associated with mayday situations. ACR specializes in electronic rescue devices and other life-saving products designed for both professional and recreational mariners. With the addition of AIS, the innovative ACR GlobalFix V5 EPIRB provides the easiest and quickest path to rescue. Return Link Service provides a welcomed sense of security knowing that your distress message has been received and Near Field Communication provides access to data and product functionality that has never before been available to any EPIRB customer. The advanced feature set of the GlobalFix V5 EPIRB makes it perfect for mariners whether coastal cruising, working offshore, or crossing oceans. Specifications: Output Power (406/121.5): 406.040 MHz, 5W (nominal) / 121.5 MHz, 50mW (nominal) AIS: Yes, AIS Alerts for Local Rescue Return Link Service: Yes, Enabled RLS confirmation direct to beacon NFC/Mobile App: Yes, Near Field Communication (NFC) and Mobile App Included Strobe: White & Infrared Dual Technology Size (antenna up) – Beacon Only: 18.5” x 4.3” x 4.36” (470 mm x 109 mm x 111 mm) Weight – Beacon Only: 1.78 lbs (810 G) Battery: Lithium battery, Li/FeS2 Battery Replacement: 10-year replaceable battery (replace 10 years after the date of manufacture or after activation) GPS: 72 Channel Multi-constellation receiver (GPS, Galileo, & Glonass GNSS) Activation: Out of bracket and wet, or manually in or out of the bracket Waterproof: 33 ft (10 m) for 5 min. Buoyant: Yes Operational Life: 48 hours minimum @ -4°F (-20°C) Deployment: Category II – Manual Release (manual deployment)  Warranty: 5 years Approvals: Cospas-Sarsat/FCC/MED/MER Approved This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Pathfinder PRO SART  *Extension pole sold separately  Stay safe at sea with the Pathfinder™ PRO Search and Rescue Transponder (SART).) The Pathfinder Pro is a fully approved Search and Rescue Transponder (SART) that complies with IMO SOLAS regulations.  When interrogated by radar, the Pathfinder Pro returns 12 intense blips to the vessel's radar screen, greatly enhancing search and rescue efforts.  The superior lithium battery provides over 96 hours of operating life in standby mode, waiting to be interrogated by radar, and 12 hours of active operating life while interrogated by radar. The Pathfinder Pro comes with a sleek wall mount to keep this compact SART out of the way, yet readily accessible in an emergency.  The attached telescopic pole conveniently connects to the bottom of the SART and provides maximum height and visibility out of a life craft. The SART can also be suspended inside the craft for hands-free usage. Search and Rescue Transponder (SART) are mandatory for all commercial vessels that must conform to GMDSS, and any vessel carrying more than one life raft. Certifications:  IMO MED  FCC  IEC standards Features Enhances radar returns with 12 intense blips, whereby the first blip represents the SART location The unit transmits through the 9.2-9.5 GHz band marine radar when interrogated by radar Non-Hazmat Lithium battery (5-year replacement life) - end-user replaceable  Technical Specifications: Dimensions (H x W x D) - 8.94" x 2.56" x 2.36" (22.7 x 6.5 x6 cm) Weight - 15.5 oz (440 g) Battery - Lithium/Iron Disulfide (Li/FeS2) (Non Hazardous) Activation - Manual Frequency - 9.2 - 9.5 GHz Waterproof - IP67 Temperature Range (Operating)  -20°C to +55°C Temperature Range (Storage) - -30°C to +70°C Operating Life Standby ≥ 96 Hours Operating Life Active ≥ 12 Hours In the Box: Pathfinder PRO SART Mounting bracket Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GP1900-09 SailPod Pre-Cut for Raymarine c95/c97/e95/e97 for 9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

RMX4900-09 RailMount for Raymarine c95/c97 & e95/e97 (Fits 1" or 1.25" Tubing) RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These new NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

SailPod Pre-Cut for Raymarine AXIOM 9 f/12″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.