Replacement HRU Kit for G8 Hydrostatic Release Unit Replacment HRU for McMurdo EPIRB in series G8.

Hydrostatic Release Unit McMurdo Hydrostatic Release for Catagory 1 EPIRB 'BreaktHRU' - the Hydrostatic Release Unit (HRU) Kit from McMurdo. Smaller that other HRUs currently available, BreaktHRU is unique in its use of a small pyrotechnic charge, which is used to enable EPIRBs to automatically float free. Features: Compact Classified non-hazardous Complies with the latest SOLAS and IMO resolutions Fits the footprint of existing HRUs Service life of two years Using technology developed exclusively by McMurdo, the pyrotechnic charge is used to activate the HRU when it is submerged in water < 13 feet. Once activated the EPIRB is automatically released - it's as simple as that!

HydroFix™ Hydrostatic Release Unit (HRU) The HydroFix™ Hydrostatic Release Unit (HRU) is a patented rod system that allows a beacon to be quickly and reliably released from a Category I bracket when submerged in water between  4.9' to 13.1' (1.5 to 4 M.)   Does not rely on a battery, blade or pyrotechnic device to release the beacon.  This advantage allows for a quick, seamless and reliable release in an emergency. *This is a date-stamped product and must be replaced every 2 years from the date of installation or 4 years from the date of manufacture.   Compatible With: ACR Sea Shelter,  Sea Shelter2 and Sea Shelter3 brackets Features: Easily replaceable 100% factory tested Technical Specifications: Dimensions -  2.5" x 3.4" x 2.0" (6.3 x 8.6 x 5.0 cm) Weight - 3.3oz (93.6 g) *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Hydrostatic Release Unit A hydrostatic release unit, or HRU, enables liferafts to surface and inflate automatically when a vessel is sinking. It is simple to install and releases at all angles - requiring only water pressure to activate.

Replacement Motor Kit for Ecofan Alcona - Fits 800CA, 802CA, & T805B Series The motor is designed for several seasons of use under normal operating conditions. If your fan spins much slower or the blade requires a push to start, a simple motor replacement may be the solution.

Replacement Motor Kit for Ecofan BelAir - Fits 806CA Series The motor is designed for several seasons of use under normal operating conditions. If your fan spins much slower or the blade requires a push to start, a simple motor replacement may be the solution.

Replacement Brush Kit for Cima 12V - 1000W-1200W Maxwell replacement brush kit for Cima 12 Volt DC 1000 - 1200 Watt windlass motors.

MC 97 Replacement Impeller Kit for Sherwood 15000K Impeller Kit Features: MC 97 Rubber Compound Available Strict Tolerance Manufacturing Designed to Provide Maximum Engine Performance Used by Leading Engine Manufactures As Original Equipment Correct Cooling at Engine Start Up and Continued Running Stable Pressure Less Material Failure and Swelling Exact Dimensions Longer Impeller Life Exact OEM Required Dimensions Longest Use Resulting in Minimum Maintenance Costs Best Engine Cooling Impeller Least Wear of Blades Broadest Offering in Marine Marketing Space (Not One Size Fits Many Approach)

Replacement Hydrostatic  Replacement Hydrostatic Release mechanism for Ocean Signal Category I EPIRB's.  Must be replaced every two (2) years from date of installation.  Compatible With:  Ocean Signal Category 1 EPIRB's *Sold as an Individual    WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Fairing Block f/GT21, GT23, GT41, GT50 & GT51 Series of Thru-Hull Scanning Transducers Use our fairing block to position your Garmin GT21, GT23, GT41, GT50 or GT51 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use a fairing block to mount the device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Control Box f/123SC-V2 Replacement Control Box f 12 & 24 Volt Single Actuator Systems - 123SC-V2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Control Box f/123DR-V2 Replacement Control Box f 12 & 24 Volt dual Actuator Systems - 123DR-V2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ROKK Mini Pro Mount Kit f/Lowrance HOOK2 and Simrad Cruise - Kayak Track Mount The ROKK mini HOOK² mount was designed alongside Lowrance’s product design team, ensuring the perfect fit for the HOOK2 4x, 4x GPS, 5x, 5 models, the world’s easiest fish finder range.  The 360° rugged marine grade mount enhances your fishing experience; you can mount, adjust and lock your HOOK² to the optimum position allowing you to spend more time fishing and less time re-adjusting.  When you're done fishing for the day, simply release the HOOK² and ROKK mini mount from its base with the quick release button to take home with your catch. The HOOK² clamp is compatible with the ROKK mini body and all 6 ROKK mini bases. Compatible With: Lowrance HOOK2 4x, 4x GPS, 5, 5x Lowrance HOOK Reveal 5" Simrad Cruise 5 Features: Engineered to withstand high shock loading. Secure mount for smart phones, handheld GPS and other small devices. Base secures with included hardware. In the Box: RL-521 ROKK Mini Quick Release Adapter for Lowrance HOOK & Simrad Crusie Displays  RLS-407 ROKK Mini Kayak Track Mount  RLS-AM ROKK Mini Adjustable Arm *Sold as a Kit

Replacement Strainer Base Replacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gph WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Replacement Strainer Base Replacement Strainer Base f/Round Rule Pumps w/Flow Rate 2800-3700gph WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.