|
Anemometer Transmitter Kit
Product Description
With Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000' (300M) from your wireless console/receiver).
With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature, anemometer, rain and third-party sensors that report in a range of 0-3 volts.
For longer distances, add one or more wireless repeaters.
Includes:
Weather-resistant shelter for transmitter
Solar panel
Battery
Mounting hardware
Not compatible with original Vantage Pro
|
200.46 |
|
|
Stainless Steel Temperature Probe w/RJ Connector
Measure temperature of air, soil, or water with this multi-purpose temperature probe.
Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.
Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.
Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332).
|
81.82 |
|
|
AeroCone® Rain Collector with Vantage Pro2™ Mounting Base
Stand-alone rain collector with a flat mounting base replaces the rain collector on your Vantage Pro2 sensor suite so it can be installed separately; or as part of an EnviroMonitor system.
Rain cone designed for even more accurate data in especially high winds!
Takes the place of the rain collector on a Vantage Pro2 sensor suite for a siting that requires separation of the rain collector and temperature/humidity sensor.
Designed to meet the guidelines of the World Meteorological Organization, our self-emptying tipping-bucket design is exceptionally accurate. Used to display daily and accumulated rainfall on our weather stations as well as rate of rainfall.
Comes with 40′ (12 m) standard cable. Rain collector can be user-calibrated for 0.01″ or 0.2 mm. Also available as a factory-calibrated 0.2 mm rain collector.
Requires:
EnviroMonitor Node and Gateway, OR
Vantage Pro2 sensor suite or Sensor Transmitter Kit and a receiver or console such as Vantage Pro2 console or Vantage Vue console, WeatherLink Live, Weather Envoy, or Vantage Connect.
Includes:
AeroCone rain cone with grips (NO DAVIS LOGO)
Base with tipping mechanism
Bird spikes
Debris screen that locks in place
40 ft (12 m) cable
Mounting hardware
|
153.41 |
|
|
Temperature Probe with RJ Connector
Used to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable.
Compatible with Weather Envoy, Envoy8X, and Anemometor/Sensor Transmitter Kit.
|
46.02 |
|
|
LinkUp - Intelligent Battery Sensor (IBS) Kit - 12V
Batteries are essential for engine starting and operating onboard utilities. With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time. The system works with any OceanLink, AcquaLink or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems.
The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement.
Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems.
The IBS system monitors a single battery or full bank. Multiple LinkUp kits can be used to provide data specific to house, starter and system-specific supplies. It works with 12V starter, gel or AGM battery types.
The IBS simply clamps onto the negative pole terminal. Completely sealed, it has a watertight 3A inline fuse within the housing. This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network.
Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play. Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.
Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.
*Includes sensor and Link Up Gateway.
Features:
NMEA 2000® certified
Wireless configuration through companion mobile App
Status LED
Plug-and-Play installation and configuration
Input Signal - LIN bus
Nominal Voltage - 12V
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
222.54 |
|
|
LinkUp - Intelligent Battery Sensor (IBS) Kit - 24V
Batteries are essential for engine starting and operating onboard utilities. With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time. The system works with any OceanLink, AcquaLink, or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems.
The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement.
Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current, and temperature, as well as state of charge, health, and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems.
The IBS system monitors a single battery or full bank. Multiple LinkUp kits can be used to provide data specific to house, starter, and system-specific supplies. It works with 12V starter, gel, or AGM battery types.
The IBS simply clamps onto the negative pole terminal. Completely sealed, it has a watertight 3A inline fuse within the housing. This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network.
Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play. Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.
Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.
*Includes sensor and Link Up Gateway.
Features:
NMEA 2000® certified
Wireless configuration through companion mobile App
Status LED
Plug-and-Play installation and configuration
Input Signal - LIN bus
Nominal Voltage - 24V
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
333.82 |
|
|
Sensor & Magnet Kit for AA150, 560, 710 & 730 - Gray
Maxwell's Sensor and Magnet Kit is designed specifically for AA150, 560, 710 and 730.
Features:
Includes Sensor and Magnet
Color: Gray
|
141.17 |
|
|
Alternator 3.15" Dual Foot Saddle J10 Serpentine Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
3.15" Dual Foot Saddle
J10 Serpentine Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
XT 250A Singleft Alternator, MC Regulator, T Sensors, Dualpul, Kit
Kit Includes: XT-SF-250-DV Alternator, MC-618 Regulator, Temperature Sensors & Mounting Hardware
XT Series Alternator: 250A, 12V, Spindle Mount (Single Foot), 1-2in, Dual Deep Vee Pulley, Case Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1473.13 |
|
|
Tank Sensor Module Kit
Raritan's Tank Sensor Module Kit is specifically for Raritan's Tank Monitor.
Features:
Designed to work with Raritan tank monitors
Allows monitoring of additional tanks
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
113.41 |
|
|
Alternator 3.15" Dual Foot Saddle Dual V Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
3.15" Dual Foot Saddle
Dual V Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
Alternator 3.15" Dual Foot Saddle K6 Serpentine Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
3.15" Dual Foot Saddle
K6 Serpentine Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
Alternator 1-2" Single Foot Dual V Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high-reliability bearings, robust rectifier diodes, and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
1-2" Single Foot Dual V Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
Alternator 1-2" Single Foot J10 Serpentine Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
1-2" Single Foot J10 Serpentine Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
Alternator 1-2" Single Foot K6 Serpentine Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
1-2" Single Foot K6 Serpentine Pulley Regulator & Temp Sensor
170A Kit
12V
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|