|
Canoe Car-Top Carrier Kit
Part #: 11437-7
A simple, convenient kit for carrying a canoe or small boat on car top. Includes four supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.86 |
|
|
Kayak Car-Top Carrier Kit
Part #: 11438-7
A simple, convenient kit for carrying a kayak on car top. Includes two supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.00 |
|
|
Collapsible Kayak & Canoe Carrying Cart
Haul your kayak easier than ever with Attwood's improved collapsible Kayak Cart, now with premium wheels!
Enhanced large diameter wheels cannot deflate, simplifying transport over uneven terrain
Cart easily disassembles to fit into most kayak hitches
Holds up to 100lb loads
|
59.28 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Drain Plug And Receiver Kit - 3/4" Diameter
The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.
Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:
Diameter: (inch) 3/4"
*Intended for use on small recreational boats and jet skis
|
5.48 |
|
|
2-Stage High Volume High-Pressure Digital Pump with Car/Battery Adapter Kit
The fastest way to inflate HPI items to full pressure. Two separate ports for inflation and deflation. LED digital gauge display & auto-stop function when set to desired PSI. Equipped with 12V DC accessory outlet cable & car battery adapter kit. The nozzle is compatible with HR valves only. Maximum pressure of 20 PSI.
Features:
The fastest way to inflate HPI items to full pressure
Automatic inflate and deflate functionality
LED digital gauge and auto-stop function
Equipped with 12V accessory outlet cable and car battery adapter kit
Compatible with HR valves only
20 PSI max pressure
|
149.29 |
|
|
Simrad autopilot Adapter Kit
Autopilot fitting adapter kit that contains 3 x ORB-5 to 1/4" NPT adapters.
Features:
Used when replacing older pumps with MkII Pumps 1,2,3,4 and 5
Used when NPT hose kits are already present
|
62.93 |
|
|
Verado Autopilot Fitting Kit for Mk2 Pumps with SteadySteer Switch
Fitted hose kit designed for simplified SteadySteer installation into Verado steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts.
SteadySteer Benefits:
Control the autopilot using the helm – enhanced usability
Steer manually through turns - a convenient manual override
Hassle-free Autopilot reengagement - reengages automatically on straight legs
Seamless and intuitive boat control
Increased convenience without sacrificing safety with SteadySteer – a functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established – no key-presses required.
Navigate safely with SteadySteer, a functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established.
Control the Autopilot with the Helm
SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading. No key-presses, no alarms – just turn the helm.
Fewer Distractions – Just Drive
No need to look at a display or push buttons to change course, merely point the bow to your destination.
Kit Contains:
3 x Hoses (Black): 2800 PSI max, 915 mm (36") 9/16-18 ORFS to 9/16 UNF
2 x Hoses (Black): 2800 PSI max, 370 mm (14.5") 9/16-18 ORFS to 9/16-24 ORFS
1 x Hose (Black): 2800 PSI max, 830 mm (32.7") 9/16-18 ORFS (O Ring Face Seal) to 9/16-18 ORFS
1 x Hose, return (Black): 2250 PSI max, 830 mm (32.7") 11/16-16 ORFS to 11/16-16 ORFS
2 x T Connectors: Stainless: 9/16-18 ORFS
1 x T Connector: Brass: 11/16-16 < 9/16-18 > 11/16-16 ORFS
1 x Steady Steer Flow Switch
2 x Adaptor, Straight: 1/4 NPT to 9/16 24 M UNF
|
1174.80 |
|
|
Replacement Cartridge for Tsunami 1200 MK2
1200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.
Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
|
32.52 |
|
|
Standard Carbon Canister
Carbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.
Features:
Brackets OEM Installed
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 220 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon
Trailerable Vessel Capacity (CARB Rating): 176 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon
*Compatible with Ethanol blended fuels
|
100.79 |
|
|
Compact Carbon Canister
Carbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.
Features:
This is a single pack that contains two Compact Carbon Canisters
Brackets OEM Installed
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 70 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon
Trailerable Vessel Capacity (CARB Rating): 56 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon
*Compatible with Ethanol blended fuels
|
90.91 |
|
|
Standard Carbon Canister for Engine Room
Carbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.
Features:
This is a single pack that contains two Standard Carbon Canisters for the Engine Room
Carbon Canister for Engine Compartment
Feature a pre-installed composite heat shield for easy installation
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 220 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon
Trailerable Vessel Capacity (CARB Rating): 176 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon
Dimensions (L x W x H):
(inch) 17.74" x 4.08" x 5.68"
*Compatible with Ethanol blended fuels
|
124.21 |
|
|
Replacement Cartridge for Tsunami 500 MK2
Attwood replacement motor cartridge for T500 model Tsunami series bilge pumps. Sold per each.
|
16.85 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|