|
Kayak Car-Top Carrier Kit
Part #: 11438-7
A simple, convenient kit for carrying a kayak on car top. Includes two supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.00 |
|
|
Canoe Car-Top Carrier Kit
Part #: 11437-7
A simple, convenient kit for carrying a canoe or small boat on car top. Includes four supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.86 |
|
|
Kayak Hoist System
Attwood's Kayak Lift Hoist is designed for the storage of kayaks, canoes, bikes, ladders and so much more. The pulley systems are constructed to allow one person can hoist any kayak, while the hook and locking mechanisms are able to safely hold up to 120 lbs. Features on this kayak storage hoist include an easy lifting pulley system and 2-inch wide webbing hand straps. All hardware needed for mounting this kayak hoist is included with your purchase. Place the Black Attwood Kayak Lift Hoist in your garage or storage shed, and you are set to keep your kayak up and off the ground all winter.
Features:
Safety holds up to 120 lbs
Easy lifting pulley system
2" wide webbing straps
Color: Black
Includes:
All mounting hardware
|
26.42 |
|
|
Kayak Handle Replacement Set - Pair
Tough but comfortably designed kayak carry handles for replacement on most kayak types and brands. The contoured grip makes carrying your kayak easier and more comfortable.
Features:
Easy installation
Durable black plastic
Tough braided rope
|
9.16 |
|
|
Kayak Angler Starter Crate Kit
Milk crates provide interior storage areas on the deck of kayaks, canoes, or paddleboards. It is a simple solution to an ever-persistent problem in a sport plagued by a lack of storage space. The YakGear Black Milk Crate comes with the YakGear logo in a standard 13 in. x 13 in. milk crate size, fitting most kayak tank wells or decks. Having milk crates for sale also prevents kayak anglers from being forced to steal beverage distributor crates from stores or shell out major cash on a glorified milk crate storage system.
The crates are honeycomb-designed to allow customization with all YakGear crate rigging accessories, including the Build A Crate Series of accessories. In addition, this kit comes with 2 x Build A Crate single rod holders and 1 x YakGear accessory pouch.
About the Accessory Pouch
The YakGear Accessory Pouch is an easily installed storage pouch that allows storage, protection, and organization for paddling and fishing accessories while on the water. The storage pouch is designed to secure tackle trays, extra lines, pliers, fish grips, and other accessories while keeping them organized at the same time. The 7-inch tall x 12-inch wide gear storage pouch will hold up to a 9-inch x 11-inch tackle box and other accessories up to 11 inches in width or 9 inches in height.
The adjustable top elastic strap combined with the side elastic web strap provides the flexibility necessary to accommodate accessories of varying sizes while maintaining a snug grasp. This gear storage pouch can be mounted anywhere that it is needed, including on a milk crate, the side of a cooler, or on the inside gunwales of the kayak or canoe, for needed extra storage.
The accessory pouch comes complete with stainless steel installation hardware, installation instructions, and rigging tips from YakGear. About the Build a Crate Single Rod Holders: Milk crates, buckets, and coolers provide interior storage areas on the deck of a kayak, canoe, or paddleboard; however, these storage methods do not have any exterior storage or rod holder features.
Rig the exterior of a preferred storage area with the YakGear Build A Crate Kits to fully maximize all storage possibilities. This single rod holder kit provides any paddler with a rod or anchor holder that easily attaches to any storage container with inside access. This allows the paddler to efficiently take advantage of storage space in a sport where extra gear is at a premium and free space is hard to find.
The rod holder is 12 inches long and features trigger cutouts to properly rest and secure reels. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Included:
1 x YakGear Black Milk Crate
1 x YakGear Accessory Pouch
2 x YakGear Build A Crate Single Rod Holders
Features:
1-year warranty
|
34.15 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Drain Plug And Receiver Kit - 3/4" Diameter
The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.
Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:
Diameter: (inch) 3/4"
*Intended for use on small recreational boats and jet skis
|
5.48 |
|
|
2-Stage High Volume High-Pressure Digital Pump with Car/Battery Adapter Kit
The fastest way to inflate HPI items to full pressure. Two separate ports for inflation and deflation. LED digital gauge display & auto-stop function when set to desired PSI. Equipped with 12V DC accessory outlet cable & car battery adapter kit. The nozzle is compatible with HR valves only. Maximum pressure of 20 PSI.
Features:
The fastest way to inflate HPI items to full pressure
Automatic inflate and deflate functionality
LED digital gauge and auto-stop function
Equipped with 12V accessory outlet cable and car battery adapter kit
Compatible with HR valves only
20 PSI max pressure
|
149.29 |
|
|
Simrad autopilot Adapter Kit
Autopilot fitting adapter kit that contains 3 x ORB-5 to 1/4" NPT adapters.
Features:
Used when replacing older pumps with MkII Pumps 1,2,3,4 and 5
Used when NPT hose kits are already present
|
62.93 |
|
|
Verado Autopilot Fitting Kit for Mk2 Pumps with SteadySteer Switch
Fitted hose kit designed for simplified SteadySteer installation into Verado steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts.
SteadySteer Benefits:
Control the autopilot using the helm – enhanced usability
Steer manually through turns - a convenient manual override
Hassle-free Autopilot reengagement - reengages automatically on straight legs
Seamless and intuitive boat control
Increased convenience without sacrificing safety with SteadySteer – a functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established – no key-presses required.
Navigate safely with SteadySteer, a functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established.
Control the Autopilot with the Helm
SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading. No key-presses, no alarms – just turn the helm.
Fewer Distractions – Just Drive
No need to look at a display or push buttons to change course, merely point the bow to your destination.
Kit Contains:
3 x Hoses (Black): 2800 PSI max, 915 mm (36") 9/16-18 ORFS to 9/16 UNF
2 x Hoses (Black): 2800 PSI max, 370 mm (14.5") 9/16-18 ORFS to 9/16-24 ORFS
1 x Hose (Black): 2800 PSI max, 830 mm (32.7") 9/16-18 ORFS (O Ring Face Seal) to 9/16-18 ORFS
1 x Hose, return (Black): 2250 PSI max, 830 mm (32.7") 11/16-16 ORFS to 11/16-16 ORFS
2 x T Connectors: Stainless: 9/16-18 ORFS
1 x T Connector: Brass: 11/16-16 < 9/16-18 > 11/16-16 ORFS
1 x Steady Steer Flow Switch
2 x Adaptor, Straight: 1/4 NPT to 9/16 24 M UNF
|
1174.80 |
|
|
Collapsible Kayak & Canoe Carrying Cart
Haul your kayak easier than ever with Attwood's improved collapsible Kayak Cart, now with premium wheels!
Enhanced large diameter wheels cannot deflate, simplifying transport over uneven terrain
Cart easily disassembles to fit into most kayak hitches
Holds up to 100lb loads
|
59.28 |
|
|
Kayak Hand Bilge Pump
This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.
Features:
Ideal for small craft such as kayaks, canoes, and small fishing boats
(inch) 18" long
Sturdy, impact-resistant, and lightweight plastic construction
*No hose is required
|
21.55 |
|
|
Kayak 15" Foot Braces - Pair
Part #: 11940-1
Ligthtweight design fits both sit in and sit on top style kayaks. Trigger lock design allow for easy adjustment. Tracks use a universal mounting hole pattern that works in a variety of kayaks.
Mounting hardware is not included.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.31 |
|
|
Kayak Grapnel Anchor Kit
Grapnel anchor will hold your kayak, PWC, canoe or float tube in mud, sand, gravel and rock. Includes a 3 lb. silver grapnel anchor with 1/4" diameter x 20' of black diamond braided MFP anchor rope and mesh bag with drawstring.
|
17.46 |
|