|
Aqua Void Ultima Combo 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
This pump is combined with the non-clogging electronic Ultima Switch for automatic operation. The electronic automatic Ultima Switch uses the patented Mirus field effect detector cells, which produce micro-electrical fields that detect disruptions caused by the level of water present in the bilge and automatically activate and deactivate the pump.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
This cartridge pump is combined with the Ultima switch for automatic operation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 17.1 oz (0.48 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.95 x 4.69 x 6.63 inches (75 x 120 x 168 mm)
|
73.44 |
|
|
Aqua Void Ultima Combo 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
This pump is combined with the non-clogging electronic Ultima Switch for automatic operation. The electronic automatic Ultima Switch uses the patented Mirus field effect detector cells, which produce micro-electrical fields that detect disruptions caused by the level of water present in the bilge and automatically activate and deactivate the pump.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
This cartridge pump is combined with the Ultima switch for automatic operation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 785 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 18.5 oz (0.52 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.95 x 4.69 x 6.63 inches (75 x 120 x 168 mm)
|
80.94 |
|
|
Aqua Void Electro-Magnetic Combo 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
This cartridge pump combines an electro-magnetic float switch
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 15.9 oz (0.45 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm)
|
75.76 |
|
|
Aqua Void Electro-Magnetic Combo 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
This cartridge pump combines an electro-magnetic float switch
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 785 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 17.3 oz (0.49 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm)
|
83.26 |
|
|
Aqua Void Automatic 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
79.37 |
|
|
Aqua Void Automatic 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
90.00 |
|
|
Aqua O2 Flex Mount 500 GPH Aerator Pump - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPSM thru-hull inlet that can be used straight or 90-degree
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
43.50 |
|
|
Aqua O2 Twin Port 500 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
43.50 |
|
|
Aqua Void 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
28.44 |
|
|
1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 1-1/8"
Does not include Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH
Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH
Amperage: 3 A
Fuse size: 5 A
Connection: 1-1/8""
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 16 oz.
|
90.37 |
|
|
Aqua Void 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
37.44 |
|
|
Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 500 GPH
This replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump.
Features:
500GPH auto replacement motor for Aqua Void Auto Bilge pumps only
Simple, two-handed twist and pull operation to remove and replace the motor cartridge
No tools required
Specifications:
Pump Size: 500 GPH
|
60.00 |
|
|
Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 800 GPH
This replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump.
Features:
800GPH auto replacement motor for Aqua Void Auto Bilge pumps only
Simple, two-handed twist and pull operation to remove and replace the motor cartridge
No tools required
Specifications:
Pump Size: 800 GPH
|
70.50 |
|
|
Aqua O2 Flex Mount 800 GPH Aerator Pump - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPSM thru-hull inlet that can be used straight or 90-degree
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 810 GPH (51 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 10.4 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
47.26 |
|
|
Aqua O2 Twin Port 800 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 810 GPH (51 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 10.4 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
46.50 |
|