Gulley IC Large Waste Water Outlet Single-outlet shower drain gulley with intelligent control built in. This product must be used with a Gulper IC since the Gulley IC is connected to a Gulper IC. When the gulley senses water, it sends an electrical signal to the gulper IC, which evacuates the system. As the water level decreases, the electrical signal transmitted by the gulley will cease. Gulper IC will continue to operate for a further 15 seconds before switching off. Application Gulley IC is a single outlet shower drain solution and has intelligent control built in (must be operated by a 12/24V Gulper IC unit only). Electronic sensors automatically control grey water waste level when connected to a pre-wired connection to the Gulper IC via Deutsch connectors. Due to remote monitoring, the pump receives signals from the Gulley IC and switches on and off automatically. In the Box: Gulley IC Nonreturn valve No 8 x 25mm self-tapping screw Cable grip Specifications: Cable Length: 2m (6ft.) Hose Connections: 19mm (3/4 in.) / 25mm (1 in.) Control voltage: 5V dc via Gulper IC Pump Current Draw: Low power 6mA supply  Connectors: Deutsch connectors – quick connect series 7 ways (directly onto Gulper IC)

Grey IC Waste Pump 12V Unique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pump Electrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped out Complete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump. Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Grey IC Waste Pump 24V Unique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pump Electrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped out Complete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump. Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper 220 Grey Waste Pump 12v Gulper valve technoloogy handles shower waste such as hair and gel. No clog, no filter waste pump built on more than a decade of market leading pump technology. Features Up to 14 ltrs (3.7 US gals) per minute Will run dry without damage and pump a mixture of air and water Specially designed to pump waste water Large single diaphragm Virtually non-choke valves No filter required Self-priming up to 3 m (10 ft) Easy to install in confined spaces Double outlet valve ensuring continuous flow Multi directional head Can be mounted almost anywhere Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper 220 Grey Waste Pump 24V Gulper valve technoloogy handles shower waste such as hair and gel. No clog, no filter waste pump built on more than a decade of market leading pump technology. Features Up to 14 ltrs (3.7 US gals) per minute Will run dry without damage and pump a mixture of air and water Specially designed to pump waste water Large single diaphragm Virtually non-choke valves No filter required Self-priming up to 3 m (10 ft) Easy to install in confined spaces Double outlet valve ensuring continuous flow Multi directional head Can be mounted almost anywhere Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Waste Water 43L (11.5 GPM) - 12V Macerator Pump 12V equipped with rotary cutter and impeller to discharge waste water with high capacity. Capacity 43 L/min (11,5 GMP) output at 4m total head. Self priming up to 3m vertical lift. Brass and stainless steel internal parts and pump body in thermo polymer with a long lasting impeller. Inlet port 38mm (1,5″) and outlet 25mm (1″). 12A fuse. Interchangeable with Jabsco 18590-2092, Johnson Pump 10-24453-04. Specifications: Weight: 1.98 kg/4 lbs Dimensions: 240/9.4L x 90/3.5H x 130/5W mm/in  Type: Black Water *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Large Waste Basket - Teak Features: Teak Waste Basket Solid teak. Rugged construction. Size:9” W x 12” H x 9” D Assembly: No assembly required Finish: Oiled finish Warranty: Lifetime Warranty on Teak

Grey Water Tank - Waste Water Tank for Viking Power 16  The Grey Water Tank is designed to be used as a collection tank for wastewater from showers, sinks, dishwashing machines, etc with 19mm, 25mm, and 38mm inlet ports, and 19mm and 25mm outlet ports. The tank includes an Ultima Switch for automatic operation and is easy to connect to any 12V/24V pump up to 20 amp. The tank is prepared for Viking Power 16, with pre-drilled holes for the pump.

Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

Water Outlet Fitting (0504) Chrome Plated Bronze Standard Male Hose Connector Black Plastic Watertight Plug Stainless Steel Bead Chain For use with on-board washdown systems Pipe Size: 1/2" O.D. Flange: 2-3/4"

Waste Water Diaphragm Pump 32L (8.5 GPM) - 12V Single chamber, self priming, heavy duty diaphragm pump 12V for waste water. Black water transfer or pump out. Capacity 32 L/min (8,5 GPM), flexible installation with 360 degree rotational ports. Quiet operation and low power consumption. Operates with no need for filter, equipped with double non-return valves. Including 38mm (1,5″) straight and 90 degree rotational connectors. 6A fuse. Interchangeable with Johnson Pump 10-13373-03. Specifications: Weight: 1 kg/1.5 lbs Dimensions: 141/5.5L x 105/4H x 140/5.5W mm/in  Type: Black Water *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Waste Water Diaphragm Pump - 32L(8.5GPM) - 24V Single chamber, self priming, heavy duty diaphragm pump 24V for waste water. Black water transfer or pump out. Capacity 32 L/min (8,5 GPM), flexible installation with 360 degree rotational ports. Quiet operation and low power consumption. Operates with no need for filter, equipped with double non-return valves. Including 38mm (1,5″) straight and 90 degree rotational connectors. 3A fuse. Interchangeable with Johnson Pump 10-13373-04. Specifications: Weight: 1 kg/1.5Lb Dimensions: 141/5.5L x 105/4H x 140/5.5W mm/in Type: Black water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Waste Water Macerator - 43L(11.5GPM) - 24V Macerator Pump 24V equipped with rotary cutter and impeller to discharge waste water with high capacity. Capacity 43 L/min (11,5 GMP) output at 4m total head. Self priming up to 3m vertical lift. Brass and stainless steel internal parts and pump body in thermo polymer with a long lasting impeller. Inlet port 38mm (1,5″) and out 25mm (1″). 7A fuse. Interchangeable with Jabsco 18590-2094, Johnson Pump 10-24453-05. Specifications: Weight: 1.98 kg/4Lb Dimensions: 240/9.4L x 90/3.5H x 130/5W mm/in Type: Black water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

12 Gallon (47L) Waste Water Tank CPL Diaphragm - 12V Complete waste water tank kit with pump ready to install. Including a 47L (12.5 G) rectangular tank in reinforced polyethylene, waste water diaphragm pump 12V, gas vent, active carbon filter, control panel and probe for level control. Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation. Specifications: Weight: 19 kg/41 Lb Dimensions: 480/19L x 330/13H x 400/15.75W mm/in Type: Black water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

19 Gallon (72L) Waste Water Tank CPL Diaphragm - 12V Complete waste water tank kit with pump ready to install. Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water diaphragm pump 12V, gas vent, active carbon filter, control panel and probe for level control. Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation. Specifications: Weight: 19 kg/41 Lb Dimensions: 700/27.5L x 300/11.8H x 400/15.75W mm/in  Type: Black water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.