|
500 GPH Cartridge Combo Series 12V
Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
Capacity straight (13.6 V): 40 l/min - 630 GPH
Amperage: 2.5 A
Fuse Size: 5 A
Connection: 3/4"
|
74.08 |
|
|
Automatic Submersible Bilge Pump - Electromagnetic Switch
01604-00
Heavy-Duty, high-performance pump
Exceeds the tough demands of commercial and recreational duty
Liquid Cooled
12-Pole motor with double ball bearings
Lip Seal design construction
Prewired with automatic float switch(with Manual Over-ride Operation)
Optional and removable check valve included
1-1/8" & 1-1/4" hose adapters included
3 year warranty
|
136.30 |
|
|
Automatic Submersible Bilge Pump - Electromagnetic Switch
02204-00
Heavy-Duty, high-performance pump
Exceeds the tough demands of commercial and recreational duty
Liquid Cooled
16-Pole motor with double ball bearings
Lip Seal design construction
Prewired with automatic float switch(with Manual Over-ride Operation)
Optional and removable check valve included
1-1/8" & 1-1/4" hose adapters included
3 year warranty
|
151.12 |
|
|
750 GPH Cartridge Combo Series 12V
Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
Capacity straight (13.6 V): 50 l/min - 800 GPH
Amperage: 3 A
Fuse Size: 5 A
Connection: 3/4"
|
81.48 |
|
|
Applications for the 809-BR-HS 12V Magnetic Drive Pump include hot water systems and solar heating.
March Pump's industrial 809-BR-HS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 2.5 feet, and its maximum head is 15.5 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
6 GPM
22.7 LPM
Max Head
15.5 FT
4.7 M
Power
.04 HP
.029 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
526.73 |
|
|
Little Giant Mag-Drive Aquarium Pump 581507
Little Giant 3-MDQX-SC Magnetic Drive Aquarium Pump
Motor 115 Volt 60Hz 1/15 HP Open Fan Cooled Motor, 1100 GPH at 1 Foot Head, Shutoff Head 14 Feet, Inlet: 1" FNPT, Outlet: 1" MNPT or 1-1/4" Tubing, Polypropylene Body, UL/CSA Listed, 6 Foot Power Cord
581507 Little Giant magnetic drive pumps are specifically designed for in-line saltwater and freshwater aquarium circulation and filtration applications.
|
493.50 |
|
|
Applications for the MDX-3-1/2 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
March Pump's industrial MDX-3-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheitor 87 Celsius. The March MDX-3-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
8.5 GPM
30 LPM
Max Head
19 FT
4 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front Housing and Impeller), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet
|
328.58 |
|
|
Little Giant Mag-Drive Aquarium Pump 581506
Little Giant 3-MDQ-SC Magnetic Drive Aquarium Pump
Motor 115 Volt 60 Hz 1/15 HP Open Fan Cooled Motor, 700 GPH at 1 Foot Head, Shutoff Head 18 Feet, Inlet: 3/4" FNPT, Outlet: 1/2" MNPT or 3/4" Tubing, Polypropylene Body, UL/CSA Listed, 6 Foot Power Cord
581506 Little Giant magnetic drive pumps are specifically designed for in-line saltwater and freshwater aquarium circulation and filtration applications.
|
504.75 |
|
|
Thru-Hull Connector - 3/4" - 90° - White
90 Degree Thru-Hull Connector - When looks are important, these are the 90 degree fittings to use. The outside nut is secured to the threaded shaft with a deck plate key. There no threaded section protruding through the head or in need of sawing so its always a neat, finished installation.
Features:
Outside nut is secured to the threaded shaft with a deck plate key
No threaded section protruding through the head or need for saws
Makes for a neat, finished installation
Built with Johnson Pump quality
|
8.71 |
|
|
Groco Cp-20-S 12V Submersible Cp-20
Groco- Centrifugal Pump Bronze Submersible 17GPM 3/4”FNPT Inlet, 1/2”FNPT or 1” Hose Outlet 12VDC
More Info: CP20-S
|
468.75 |
|
|
Little Giant Pump 581012
Little Giant TE-3-MD 230V Magnetic Drive Pump
Motor 230 Volt 50/60 Hz 1/20 HP Totally Enclosed Fan Cooled Motor, 590G PH at 1 Foot Head, Shutoff Head 16.3 Feet, Inlet: 1/2" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug
581012 Magnetically driven pump for mildly corrosive chemicals and solutions. The MD Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
466.50 |
|
|
Scot Pump SC 131-000-806-4.75 for Scot Pump 57017-2
|
501.67 |
|
|
Aerator Head - 9-3/4" Spray Bar with Shut Off Valve
Overall length 9-3/4", 3/4" thru-hull, one shut off valve
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
24.68 |
|
|
Little Giant 3-MD-SC Magnetic Drive Pump 581503
Little Giant 3-MD-SC Magnetic Drive Pump. This Pump will handle up to a 48,000 BTU Air Conditioner
Motor 115 Volt 50/60 Hz 1/12 HP Open Fan Cooled Motor, 750 GPH at 1 Foot Head, Shutoff Head 21.9 Feet, Inlet: 3/4" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord
581503 Magnetically driven pump for Circulation of moderately corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other moderately corrosive chemicals and solutions that are compatible with the pump's material of construction
|
445.38 |
|
|
Bilge Alert High Water Alarm - 12V Sensor
The Johnson Bilge Alert High Water Alarm detects disruptions in a bilge pump from water or other fluids. The alarm is very small, easy to mount, and is held within a sealed case that resists all corrosion or potential damage from oil and debris.
The Johnson Bilge Pump Alert system utilizes a patented Mirus field effect detector cell that produces a micro-electrical field. When activated, the system triggers a 100db piezo alarm and LED light on the control panel. To prevent false alarms, water must disrupt the sensor for 8 seconds before going off. In addition, a 3-way rocker switch allows users to test, arm, and turn off the alarm.
|
84.44 |
|