F3B-19 - Capacity 21 l/min Perfect for bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc. Description F3B-19, 12V Body Bronze Impeller 09-843S-9 Seal Lip seal Connection 3/8" NPT Length 170 mm - 6.7" Width 113 mm - 4.4" Height 82 mm - 3.22" Weight 2 kg - 4.5 lbs

F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products. Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection. Features: Limited 3 Year Warranty Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc. Oil-resistant impeller Self-priming Easy maintenance Handle debris (bilge pumping) Self-priming All motors are heavy duty to provide long service life even under heavy use Available in 12 or 24 volts Specifications: Body: Bronze Impeller: 09-824P-9 Seal: Lip seal Connection:  Hose 1" / +" NPT Length: 180 mm - 7" Width:  120 mm - 4.72" Height:  90 mm - 3.54" Weight:  3 kg - 6.6 lbs

1000 GPH Multi Port Shower Sump Pump 12V with Switch This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter. *CE-Approved Features: Includes the L650 Duo pump and a mesh filter for easy cleaning Multiple inlet ports Handles wastewater from more than one tapping point Tight-fitting lid to minimize splashing and odors Check the valve on the outlet Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH Capacity straight (13.6 V/27 V):61 l/min - 972 GPH Amperage: 3.4 A Fuse Size: 5 A Pump Body: Thermoplastic Shaft Seal: Lip seal Voltage: 12 V DC Intake Hoses: 1x3/4", 1x3/4" or 1x1" Discharge Hose: 3/4"

5 Gallon White Bucket Kit - Includes Bucket, Caddy, Grate Seat, Buff Magic, Pro Polish Brite Wash, SMC & Serious Shine The Ultimate One Bucket System is the complete storage and detailing solution! Turn an ordinary 5-gallon bucket into an extraordinary multi purpose utility item that will simultaneously transform your washing experience and gear storage. This version is packed with Shurhold detailing chemicals to keep your toys Clean-N-Simple! The Ultimate ONE Bucket System includes: World's Best Rope Handle 5 gallon Bucket in black or white. Bucket Lid / Padded Seat combo Buckt Grate (Keeps your wash utensils in clean water) Bucket Caddy (Keeps everything you store in your bucket organized) Bucket Base (So your bucket won't slip or tip) Plus included inside the Ultimate ONE Bucket system: Brite Wash 32oz  Pro Polish Wax 16oz SMC Cleaner 32oz Buff Magic Compound 22oz Serious Shine 16oz Everything you need to care for your prized possession in package.

31705 Bilge and Shower Drain Pump Bilge/Livewell/General Purpose Diaphragm Pump Features: 12v Self-Priming from dry up to 2.4m (7.8ft) Run dry without damage Smooth flow Four piston, diaphragm pump Powerful heavy duty motor with Thermal Overload Protection Snap-in Ports Waterproof coating Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards) Meets EN 50081-1 Electro-magnetic Compatiblity Complies with EN ISO 8849 MARINE Electric Bilge Pump WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Goulds 5GBC05 Multistage Pump 1/2Hp 115V Goulds Centrifugal Pump, Cast Iron Multistage Booster GB Series, 5GPM, 115/230V 60HZ 1/2HP 1Phase ODP, Carbon/Ceramic/Buna Seal, 9 Stages

Cartridge Bilge Pumps 500 GPH For 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH Capacity Straight: 40 l/min - 630 GPH Amerpage: 2.5A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz.

Aqua Jet Flow Master 5.0 WPS The ideal choice for pressurizing water in a closed system. The digital controller adjusts water flow asthe demand is increased and decreased while maintaining a very smooth flow. The unique variable flowfeature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple taps are being used. Features: Capacity: 19 l/min - 5 GPM Pressure Cut Off: 3.5 bar - 50 psi Fuze Size: 15 A Connection:3/8" NPT / hose 1/2"; 1/2" NPT / hose 3/4"; 1/2" NPT 3/4" hose 1/2 CTS Dimensions: 239 mm/9.4" long x 209 mm/8.22" wide x 113 mm/4.49" high Weight: 2 kg/4.5 lbs Motor: WPS 5.0 - 150 W, 12/24V DC (with built-in thermal protection) Body: Nylon/Polypropylene Valves: Santoprene/EPDM Diaphragm: Santoprene

Twin Port Pumps 1250 GPH Offers the convenience of using only one intake for both the livewell and raw water wash down pump. The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 1-1/8" discharge to livewell. Does not include Dura-Port. while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports. High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.

Aqua Void Electro-Magnetic Combo 500 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches This cartridge pump combines an electro-magnetic float switch Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 15.9 oz (0.45 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm)

Aqua Void Electro-Magnetic Combo 800 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches This cartridge pump combines an electro-magnetic float switch Specifications: Pump Size: 800 GPH Capacity Straight (12V): 785 GPH (50 I/min) Voltage: 12V Amp: 3.7A Fuse: 5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 17.3 oz (0.49 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm)

Groco 12V-F 12V Motor 1/8Hp 3.5" Shaft  

Cartridge Bilge Pumps For 500 GPH, 750 GPH, and 1000 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve. Features: Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity Straight: 50 l/min - 800 GPH Amperage: 3 A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz.

Automatic Submersible Bilge Pump - Electromagnetic Switch 01604-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 12-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty