Aerating Heads Overall length 13-3/4" thru-hull, one shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head Spray Head Assembly. The overall length 13-1/4" 3/4" barb, one shut-off valve with mounting bracket.

Aerating Heads 2 Piece Assembly: 8" spray bar with 3/4" barb 6" shut off assembly with 3/4" barb and 3/4" Thru-Hull Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head Overall length 10-1/2", 3/4" barb, shut off valve w/bracket Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head Overall length 12-3/4", 3/4" thru-hull, one shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head - 9-3/4" Spray Bar with Shut Off Valve Overall length 9-3/4", 3/4" thru-hull, one shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head Overall length 6-3/4", 3/4" thru-hull, shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Aerator Head One Shut Off Valve

Aerator Head - 9" Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.

Tsunami Mk2 T500 Aerator Kit This aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged. Kit Includes: Aerator spray head SS wire mesh strainer  Pump Straight outlet fitting  Hose  Two hose clamps Specifications: Pump Model: T500 Flow Gal/HR: 500 Amp Fuse: 3 Outlet Hose Inner Diameter: 3/4” (19mm) Two hose clamps

Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12V This is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.  Kit Includes: Attwood Tsunami Mk2 500 GPH Pump Washer / Non-Return Valve 90-degree Outlet Straight Outlet 3/4" x 5' Pump Hose 3/4" Thru-hull fitting 2-way on/off switch with bezel plate Snap-It hose clamps Wire Kit Installation Kit Easy Installation & Service GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Caution: Bilge pump switches are not external ignition protected

B45 Bronze Thru-Hull with Depth & Temperature - 8-Pin for Garmin The B45 is Airmar’s smallest, bronze, thru-hull stem, offering quality design at an economical price. The classic housing is streamlined to deflect aerated water from the transducer’s face, providing solid echo returns. Features: Bronze housing Depth and Temperature Recommended for planning-hull powerboats and cruising sailboats up to 9 m (30’) Good sensitivity in a compact housing High-performance fairing included Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) accuracy Specifications: Fits: All Garmin 50/200 kHz units with 8-pin Usable Shaft Length: 92 mm (3.62 in.) Standard fairing block: 33-351-01 Frequency: 50/200 kHz Beamwidth: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W Maximum Depth Range (50 kHz): 235 m to 353 m (800 ft. to 1,200 ft.)  Maximum Depth Range (200 kHz): 118 m to 206 m (400 ft. to 700 ft.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B265LH 1kW Thru Hull Transducer Features: Bronze 1kW Temperature Included

3/4" Bronze Combo Scoop Thru-Hull w/Nut  Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Specifications: Thread NPS: 3/4"

1" Bronze Combo Scoop Thru-Hull w/Nut  Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Specifications: Thread NPS: 1"