|
F5B-1907 Impeller Pump - 12V - 3/4" NPT
For bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc.
Features:
Body: Bronze
Impeller: 09-1027B-9
Seal: Mechanical Seal
Connection: 3/4" NPT
Length: 10.15"
Width: 5.15"
Height: 4.72"
Weight: 17.5lbs
|
507.90 |
|
|
F5B-9 Impeller Pump HS Crankshaft
Features:
Pump Body: Bronze
Ports: 1-1/4" Hose
Cam: Full
Impeller: Neoprene
Shaft Seal: Lip Type
Drive: Crankshaft Pulley Mounted
|
266.66 |
|
|
F5B-9 Impeller Pump OEM - Flange Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
Crankshaft style cooling pump featured on older style small block GM marine engines such as: American Diesel & Bomac Marine
Easy to access impeller design
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 3/4" NPT
Mount Type: Flange
CAM: Full 1/1
shaft: Mechanical
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
438.00 |
|
|
Johnson 10-24487-03 Cm10P7-1 Mag Drive 12V 3/4
|
198.59 |
|
|
Groco Cp-20-S 12V Submersible Cp-20
Groco- Centrifugal Pump Bronze Submersible 17GPM 3/4”FNPT Inlet, 1/2”FNPT or 1” Hose Outlet 12VDC
More Info: CP20-S
|
468.75 |
|
|
Tsunami Mk2 T500 Aerator - 12V - 3/4" NPT Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 500
|
33.91 |
|
|
Tsunami Mk2 T800 Aerator 12V 3/4" NPT Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 800
|
40.08 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet.
A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump Head Only, Bronze
|
681.56 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump 1/3HP ODP 115 Volt Only
|
1301.40 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump 1/2HP ODP 115/230V Monel Shaft
|
1486.80 |
|
|
Cartridge Bilge Pumps 500 GPH
For 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
Capacity Straight: 40 l/min - 630 GPH
Amerpage: 2.5A
Fuse Size: 5 A
Connection: 3/4"
Max Height: 112 mm - 4.4"
Weight: 0.27 kg - 9.6 oz.
|
28.09 |
|
|
500 GPH Cartridge Combo Series 12V
Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
Capacity straight (13.6 V): 40 l/min - 630 GPH
Amperage: 2.5 A
Fuse Size: 5 A
Connection: 3/4"
|
74.08 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor
|
1167.30 |
|
|
Hypro 4101C-A, Roller Pump 7Gpm Ci
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
Pumps are available in reverse rotation
|
231.75 |
|
|
Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.
The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
|
592.44 |
|