Stainless Impeller Puller - Large Investment Cast 316 Stainless Steel. Dimensions: Width: 3-3/4" Height: 6-3/4" Thread: 7/16" 

Stainless Impeller Puller - Small Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes.

Stainless Steel Deck Plate - 3"  Use with Sea-Dog® Deck Plate Keys 335680 or 335699 (not included). Use anti-seize lubricant to protect threads from galling.

Stainless Steel Rail Mount Flagpole - 30"  The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH.

Stainless Steel Rail Mount Flagpole - 17" The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH.

Sand Cast Brass Chrome Plated Folding Step This Folding Step has a patterned, texture finish for better traction. The spring loaded folding mechanism will keep the step in the open or closed position without rattling. Constructed of chrome plated sand cast brass. Installs with two FH fasteners (not included). Also see Sea-Dog® Stainless Folding Step (328020). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

SEA-DOG Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.

Stainless Steel Clam Shell Vent - Large Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).

F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") Line A range of specialised rope splicing needles for sailors and riggers. They are specifically designed for use with modern synthetic fibres and rope constructions, in particular small line sizes where conventional fids/needles don't work. Features: "Pull-through" operation Unique double needle clamps the line making it easy to pull through Ideal for making "soft shackles" Ideal for pulling cover plaits into the core for making tapered sheets Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter Fixed handle with wire running around full length for maximum strength

Gas Filled Lift Spring - 20" - 40#  Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.  Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.  Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 10" - 60#  Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.  Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.  Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Clam Shell Vent - Small  Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).

Kayak Hatch Cover - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 17-1/4 in. Style: Performance  Weight: 1.30 lb.

Kayak Hatch Cover - 8" - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 8 in. Style: Performance Weight: 0.55 lb.