|
Cal MS-1200-6B Pump 1200Gph 115V with Base and Cord
Centrifugal Pump Stainless and Bronze Body
1200GPH No Flow Control
115V 60Hz with 6 Foot Power Cord
3/4" Male NPT Inlet and 1/2" Male NPT Outlet
Viton Seal
Can Run in Open Air or Submersed
For Fresh or Salt Water up to 110F
Can Be Used With Marine AC Units up to 60,000BTU
Approved for: UL, CE, ABYC and USCG
Includes 2 Nylon Mounting Brackets
|
456.00 |
|
|
Cal MS-900-6B Pump 900Gph 115V W/Base
Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 115V 60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets
|
453.96 |
|
|
Little Giant Pump 506065
Little Giant WRSC-6 Sump Pump
3.5 gallon Tank made of Polypropylene, lightweight, corrosion-resistant, it's designed with O-rings for water tight seal. The cover includes removable filter for easy cleaning.
Cover includes 1/1/2" FNPT (38 mm) discharge and intake opening, and 2" FNPT (5 cm) vent opening and it is Pre-assembled, ready to install
IAPMO listed
Pump Features
1/3 hp. 115 Volt
Multiple switch options
cCSAus listed (pump only)
506065 Removes water from laundry trays, lavatory sinks, wet bar sinks, dehumidifiers, air conditioners (condensate), water softeners, etc. Installs above floor, no need to dig a sump. Unit is pre-assembled and ready to install.
|
513.75 |
|
|
March 809 815 Series Mag-Drive Centrifugal Pumps
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports
|
498.00 |
|
|
Cal Pump MS320P-6B SS/Bronze Pump 375Gpm 115V
Cal Marine are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard
Premium stainless steel and bronze construction for longevity
115 Volts - 6ft power cord - 3 wire; black, white, green
Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm)
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air (below water level)
Viton seals suitable for harsh marine applications
1/2" MPT Intake and 1/4" MPT Discharge
Approximate dimensions: 3-3/4" x 4-1/2"
One year warranty
Pump Applications:
Ideal for harsh marine applications
|
304.98 |
|
|
Jabsco's NEW VFlo Water Pressure Pump, Quiet With A Constant Flow
The new variable flow, constant water pressure pump now featuring the revolutionary new technology, designed to automatically diagnose and monitor all aspects of your pump and water pressure system performance to prevent system failure. V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform the variety of onboard delivery tasks.
Specials Closeouts Remanufactured Rebates
|
|
|
Cal Pump MS-580-20 Pump 580Gph 115/120V 20'Cord
Cal Marine Pumps are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard
Premium stainless steel and bronze construction for longevity
115 Volts - 20ft power cord - 3 wire; black, white, green ( NO PLUG ON END )
Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm)
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air (below water level)
Viton seals suitable for harsh marine applications
3/4" MPT Intake and 1/2" MPT Discharge
Approximate dimensions: 4-1/2" x 6-1/4"
|
416.52 |
|
|
Cal Msr-12 Repair Kit For 1200
Cal Pump Repair Kit for MS-1200 MS1200 Pumps, includes: Impeller, Volute, O-Ring, Hardware. No Flow Control Valve
|
53.89 |
|
|
March 809 SS HS C 115V 50/60 115V 50/60 Beer Pmp/Base 6'
|
444.99 |
|
|
Cal Pump MSUBM Nylon Bracket Fits All But 225 320
Nylon Mounting Brackets for 580, 900 and 1200 Pumps. Includes One Pair of Brackets.
|
57.46 |
|
|
March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'
|
359.45 |
|
|
March 815 BR-C 115V Pump Assy W/Base 115V
|
434.85 |
|
|
Cal Msub SS Mounting Bracket
Cal Pump SS Mounting Bracket for MS225 and MS320 Pumps.
Stainless steel construction
All metal
|
58.57 |
|
|
Cal Pump 305626005 Repair Kit for MS320P
|
48.83 |
|
|
Cal Pump 305626006 Repair Kit For MS580P
|
51.31 |
|