Cat Pump 6775-ADP Plunger Pump 60 Frame This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Technical Specifications Max Flow: 75 gpm / 283.9 lpm Max Pressure: 1200 Inlet Port Size: 2" NPT(F) Discharge Port Size: 1 1/4" NPT(F) RPM: 650 Drive Type(s): Belt Material: Brass   Ships by Truck Only

Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings. Dimensions:  23.86 X 18.11 X 9.72 Features Triplex design delivers high efficiency and low pulsation. Durable dual V-Packings are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments. Special high-density, polished, concentric plungers provide a true wear surface and extended seal life. Specially formulated Seals and V-Packings offer unmatched performance and extended life. Interchangeable inlet and discharge valves for easy servicing. Wet-end easily serviced without entering crankcase. Specifications Maximum Flow: 25 GPM Maximum Pressure: 2000 PSI Maximum Temperature: 140° F RPM: 870 Inlet Port: 1.5" NPT-F Outlet Port: 1" NPT-F

Cat Pump 247 is a triplex [three plunger rod] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.   Technical Specifications Max Flow:3.6  Min Pressure:100  Max Pressure:1200  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:1725 Drive Type(s):Belt  Material:Nickel Aluminum Bronze (NAB)

Cat Pump 430.011 Piston Pump 4 Frame This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings. The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life. Technical Specifications Max Flow: 5 gpm / 18.9 lpm Max Pressure: 1000 Inlet Port Size: 1/2" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1040 Drive Type(s): Belt, Clutch Material: Brass

Cat Pump 280.0110 Piston Pump 3 Frame This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings.   The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.   Technical Specifications Max Flow: 3 gpm / 11.4 lpm Max Pressure: 1000 Inlet Port Size: 1/2" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1330 Drive Type(s): Belt, Clutch Material: Brass

Cat Pump 45 PLUNGER PUMP 5 FRAME The Cat Pump 45 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.   Technical Specifications Max Flow: 4.5  Min Pressure: 100  Max Pressure: 3500  Inlet Port Size: 0.5 Discharge Port Size: 0.37 RPM: 1645 Drive Type(s): Belt Material: Brass (BB)  

Cat Pump 357 Plunger Pump 5 Frame The Cat Pump 357 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Bunea-N] seals and o-rings. The 1725 RPM permits multiple drive options including direct drive, flexible coupling, clutch or belt drive.   Technical Specifications Max Flow: 5 Min Pressure: 100 Max Pressure: 1500  Inlet Port Size: 0.5 Discharge Port Size: 0.37 RPM: 1725 Drive Type(s): Belt Material: Nickel Aluminum Bronze (NAB)

Cat Pumps 33005 Seal Case Socket Simplifies seal replacement for various plunger pumps. 1/2" Drive for 7 frame

Cat Pumps 33006 Seal Case Socket Simplifies seal replacment for various plunger pumps. 1/2" Drive for 15 frame

Cat Pump 310 Plunger Pump 5 Frame This pump is made for continuous duty operation. It requires little to no maintenance and is great for many cycles of a car wash. This triplex designed pumps offer high efficiency and low pulsation. Mounting kits and rails are not included and must be ordered separately.   Pump Features Lubricated high pressure seals are durable and cooled by pump liquid Double protection provided by pre-set lo-pressure seals that prevent external leaks No packing adjustment required Drive type: belt   Pump Technical Specs Max Flow: 4 GPM Pressure Range: 100 - 2200 PSI Inlet Pressure Range: -5 to 60 PSI (-0.35 to 4 bar) RPM: 950

Cat Pump 45116 Rod Plunger The CAT 45116 is a replacement plunger rod for CAT 3535, 3541, 3545, and 3547C pumps. Genuine CAT replacement part, guaranteed to fit. Use to replace damaged or missing plunger rod during maintenance or repairs. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number

Cat Pump 33004 Seal Case Socket Seal Case Removal Tools Simplifies seal replacement for various plunger pumps. 1/2" Drive Socket for 5 Frame model

Cat Pump Piston Pump 4 Frame The Cat Pump 430 is a triplex [three piston rods] positive displacement, reciprocating, piston pump, constructed with brass manifolds, 304SS valve assemblies, chrome-plated 304SS cylinders and sleeves and standard NBR [Buna-N] seals and O-rings. Its low RPM is designed for belt drive. The Uniflow design features a mechanically actuated inlet valve providing a continuous forward fluid flow and strong suction.   Technical Specifications Max Flow: 5 Min Pressure: 100 Max Pressure: 1000 Inlet Port Size: 0.5 Discharge Port Size: 0.37 RPM: 1040 Drive Type(s): Belt Material: Brass (BB)

Cat Pump 814279 Retainer Seal New PVDF 2-piece retainer seal for a direct drive plunger pump. Compatible with any 35-frame pump. Authentic OEM part from CAT Pumps, guaranteed to fit and function perfectly.

Cat Pump 44084 Retainer CAT Pump 44084 is a replacement 10mm plunger retainer for CAT 3535 pumps. Genuine CAT replacement part, guaranteed to fit. Use to replace damaged, missing, or worn plunger retainer during maintenance or repairs. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number