8" Long PVC Pipe This RAM PVC pipe is 8 inches long and is compatible with RAM's PVC Pipe Sockets (C Size and B Size). Specifications: Length: 8 in. Materials: High-strength composite Weight: 0.16 lb

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern) Description The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.64 lbs

Level Cup™ XL w/Long Double Socket Arm Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a long arm that can accommodate any B-size mounting base. This gives you the flexibility to put your cup anywhere you need it. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

RAM STACK-N-STOW Bait Board w/18" Pipe, Post & Spline The RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With spline post, located on the bottom of the 18" long pipe, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. With the 18" long pipe, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board. Features: Magnetic surface for tools Customized mounting options Accessorize with phone, camera, drink cup mounts Mounting options for boat and kayak High strength materials ensure product longevity Integrated features for hanging tools Easy removal and stowage Made in U.S.A. Lifetime warranty Bait Board Dimensions: Length: 10" Width: 13" Depth: 1.625" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM® 14" PVC Pipe with Single Socket Arms Specifications: Product Dimensions: Overall Length 14" Ball/Socket Size: B Size (1") Materials: High strength composite

PVC Pipe Socket with Composite Octagon Button This RAM PVC pipe has an octagon button for use with RAM® octagon products. Features: Easily connect to RAM® octagon products to create an extension for your mounting system Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Materials: High-strength composite Weight: 0.07 lb.

RAM-TUBE 2000 Holder with 6" Long Spline Post (No Base) The RAM-301-NB consists of the RAM-TUBE 2000 fishing rod holder and 6" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAM-301-NB to your existing spline post base, or choose from an assortment of RAM compatible bases. Tube Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Long Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. T-Bolt Dimensions: .48" x .95" Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: Part number reflects product packaged in a retail bag store shelf display.

RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to a 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer. Compatible Transducers: The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw. Features: 1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location 2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm 3. Quality materials prevent corrosion and keeps your transducer arm mount 4. Lifetime warranty Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

RAM STACK-N-STOW Bait Board The RAP-395U includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With the universal AMPs hole pattern, located on the bottom of the board, easily integrate the bait board to your existing mount, or choose from an assortment of RAM compatible mounts. The bait board will also accomodate pipes and extension poles with a diameter of 1", and with a fish on the line, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board. Features: Magnetic surface for tools Customized mounting options Accessorize with phone, camera, drink cup mounts Mounting options for boat and kayak High strength materials ensure product longevity Integrated features for hanging tools Easy removal and stowage Made in U.S.A. Lifetime warranty Bait Board Dimensions: Length: 10" Width: 13" Depth: 1.625" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureScan LSS transducer, while protecting it from damage. Perfect for kayak applications, the included rigid mounting arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the transducer mount can quickly be moved to a different kayak with an existing 1" RAM ball. Add a RAM ball mount for the Lowrance HDS-7 Fishfinder, and you have a complete mounting solution for your next fishing adventure. Compatible Transducers: Lowrance StructureScan LSS-2 Lowrance StructureScan LSS-1 Features: 18" rigid aluminum rod can be bent to position your transducer to its optimum location Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm High quality materials prevent corrosion Compatible with the Yakattack 1" screw ball Lifetime warranty Made in U.S.A. Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

RAM Mount Strap Mount w/Long Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.