RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base
Part #: RAM-B-316-1-238U
The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18" rigid flex rod. The flex rod base is designed to connect to a vehicle seat rail bolt in cars, trucks, fleet vehicles and suvs. The flex rod can hold light to medium weight items in your vehicle safely and securely.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.32 | |
POD I Universal No-Drill™ Vehicle Mount with 24" Rigid Aluminum Rod & 1.5" Diameter Ball Round Adapter Base
The RAM POD I, universal no-drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Features:
Installation Instructions: At right angles to the base of the flexible 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag
|
55.67 | |
RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large Tablets
The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip® III clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III.
The RAM X-Grip® III cradle is compatible with the following tablets WITH OR WITHOUT CASE:
Apple iPad Air
Apple iPad 4 (With Lightning Connector)
Apple iPad 3
Apple iPad 2
Apple iPad 1
HP TouchPad
Asus EEE Pad
Asus Eee Pad Transformer
Lenovo LePad Slate & IdeaTab Lynx
LG G-Slate
LG Optimus Pad
Microsoft Surface
Motorola XOOM
Motorola XYBOARD 10.1
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Samsung Galaxy Tab 2 10.1
Samsung Galaxy Tab 3 10.1
Toshiba Thrive
Most 10" Screen Tablets
X-Grip® III Cradle Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of cradle allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
6. Multiple mounting access points on the back of the cradle
7. Additional support keeper at the bottom of the cradle
8. Full access to all ports
9. Lifetime warranty
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The RAM-B-316-1-UN9 is not compatible with the Apple iPad with LIFEPROOF NUUD CASE
|
116.17 | |
RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base
Part #: RAM-B-316-1U
The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to a 18" long flexible rod. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
|
31.39 | |
RAM Pod I Universal No-Drill Vehicle Mount w/Netbook Tray
Well thought out and compact designs are common place at RAM and our RAM Tough Tray II™ is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC's, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.
This kit includes the RAM-234-6 with the RAM POD I with a 1" diameter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt.
Tough Tray II™ Dimensions:
Tray Depth: 6.0"
Tray Thickness: 1"
Tray Width (Expansion): 8.56" to 11.12"
Side Clamp Arm Height: 2.75" max
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
80.12 | |
RAM Mount POD I No-Drill Vehicle Mount w/X-Grip II
Part #: RAM-B-316-1-UN8U
Consists of the universal spring loaded X-Grip II holder and RAM POD I universal No-Drill vehicle mount. The base of the mount clamps to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it's optimum viewing location. The RAM POD I will hold everything you need safely and securely.
X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II.
Compatible Devices:
Amazon Kindle
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Samsung Galaxy Tab (7" version)
Holder Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to fit)
Maximum Width = 5.75"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
Material:
High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum
|
89.26 | |
RAM® X-Grip® with RAM® Pod™ I Vehicle Mount for 12" Tablets
The RAM-B-316-1-UN11U consists of the RAM POD I universal No-Drill® vehicle base, 18” rigid aluminum rod, socket system and universal X-Grip® clamping cradle for 12" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Gripclamping cradle expands and contracts for perfect fit of most 12" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY.
Features:
Universal vehicle mount attaches to seat rail without any drilling necessary; 18" aluminum rod can be bent to your ideal position
Spring-loaded 'X' design with rubber caps sports great holding power without hiding your tablet; fits most 12" tablets
Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Holder Dimensions: Max Height: 10.25" (using optional supports), Width Range: 7.25" - 8.75", Max Depth: .875"
Ball/Socket Size: B Size (1")
Materials: Marine-grade aluminum, High strength composite
|
131.74 | |
RAM POD I Universal No-Drill™ Vehicle Mount with 18" Rigid Aluminum Rod & Round Adapter Base
The RAM-B-316-1-202U, universal RAM-POD I vehicle mount, consists of a RAM 1" diameter ball and socket system, connected to a 18" long flexible rod. The base consists of a 2.5" diameter round plate with universal AMPS hole patten end. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
36.16 | |
RAM POD III Universal No-Drill Laptop Mount w/Tough-Tray
The RAM-316-3SW1U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, ratchet swing arm and RAM Tough-Tray. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, smartphones or other electronics.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
197.77 | |
RAM POD I w/1.5" Single Socket w/202
The RAM POD I, universal No-Drill, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
54.43 | |
Universal No-Drill™ Vehicle Base
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit a variety of vehicles. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Will this mount install in your vehicle? Learn more by following the steps in the Quick Guide located under the Literature tab.
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Specifications:
Placement of Mount: Passenger side floor board, in front of seat
Drilling Requirements: No Drilling - uses existing seat bolts
Seat Configuration: Bucket
Pole: Lower Pole included with base
Material: Powder Coated Steel
Features:
1. Custom, No-Drill™ mounting base offers lowest profile in the industry
2. Manufactured from high strength steel with a durable powder coat finish
3. If required, high quality fastening hardware is included
4. Mounts using existing seat bolts, no drilling required
|
66.79 | |
RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm & 2/2.5" Round Bases (AMPs Hole Pattern)
The RAM-316-3-202U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm and two 2.5" round bases that contain the universal AMPs hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The universal AMPs hole pattern found on the round base adapter will connect to many RAM cradles.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
136.92 | |
RAM Mount POD III Universal No-Drill Mount w/Double Socket Arm, 2.5" Round Base & 3.625" Square Base RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.00 | |
RAM® Transducer Mount with 18" Aluminum Rod & Diamond Base
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. The unique design provides a universal solution for virtually any kayak as well as any transducer. The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Assembly Hardware:
(1) 1/4"-20 x 1.5" Machine Screw
(1) 1/4"-20 Nylock Nut
Specifications:
Ball/Socket Size: B Size 1"
Materials: Marine-grade aluminum, High strength composite
|
34.66 | |
RAM (Left Hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm and Diamond Base (AMPS 2-Hole Pattern)
Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.
Low Profile, Low Cost and Extremely Robust:
- The minimalist design offers a low profile form factor while offering an extremely robust mounting platform
- Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications
Highly Versatile:
- Angle adjustment feature to compensate for varying floorboard angles
- Can be used as a horizontal or vertical flat surface drill-down mount
- Solid steel post can be cut to size in order to accommodate varying vehicle configurations
Easy to Install and Remove:
- Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle
- Attaches using an existing seat rail bolt or seat track
- Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use
Pole Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
159.55 | |